The document contains field notes from a leveling and tachometric surveying exercise. It includes:
- Leveling readings taken along a route to determine reduced levels at stations.
- Tachometric staff readings taken from an instrument set up to survey cross sections of a bridge and sections upstream and downstream.
- Horizontal distances, vertical distances, and reduced levels were recorded at points along the cross sections.
The document provides statistics and information about transportation projects and transit services in the Town of Milton. It summarizes ridership growth for Milton Transit from 2010 to 2013. It also outlines the town's current transportation projects, details of Milton Transit routes and services, and monthly performance statistics for transit ridership from January 2013 to July 2013. Charts are included showing trends in service hours, ridership, costs and revenues for Milton Transit over recent years.
This document contains the model parameters for a 0.25um CMOS process from TSMC. It includes parameters for both NMOS and PMOS transistors. The parameters define the transistor characteristics and behavior. Some key parameters include threshold voltage, mobility, saturation velocity, junction capacitances, and short channel effects.
This document contains field observation data from a theodolite survey including station lines, interior angles, bearings, coordinates, and calculations of corrected interior angles and coordinates. It lists 10 stations with their line lengths, observed and corrected interior angles, calculated bearings, and total and corrected latitude and departure coordinates. It also shows the calculation of the total interior angle error and equal distribution of the correction to each station interior angle.
Volvo EC55B Compact Excavator Service Repair Manualfujdfjjskrtekme
This document provides service information for an excavator including:
1) Locations of key components on the excavator and descriptions of each.
2) Conversion tables for common measurement units of length, area, volume, weight, pressure, temperature and flow rate.
3) Specifications for the start switch, battery disconnector switch, and standard tightening torques for screws and nuts.
Study on baltim field,b.sc graduation project 2015, by atam teamPE Mahmoud Jad
This document discusses petroleum engineering as a career. It covers the following key points:
- Petroleum engineering involves the production of hydrocarbons like oil and gas. It covers activities from exploration and production to refining.
- The field requires knowledge of disciplines like geology, geophysics, drilling, reservoir simulation, and economics. Engineers also need skills in using computer systems and automation.
- Duties of petroleum engineers include locating drill sites, setting up extraction machinery, and overseeing safe and efficient extraction and processing of petroleum products.
This document contains the results of various physical evaluations for an athlete named Juan Pablo Marsicano. It includes measurements of his speed over various distances from 5 meters to 30 meters. It also evaluates his speed when changing direction to the left and right. Further evaluations measure his jumping ability in tests like squat jumps and countermovement jumps on a force platform. Repetitive jump tests and overhead strength comparisons to his own bodyweight are also included. The document concludes with an evaluation of his intermittent endurance over 1000 meters and heart rate recovery times.
The document provides specifications and performance calculations for a BMW 740li vehicle. It includes:
1) Engine specifications such as displacement, power, torque, and transmission gear ratios.
2) Chassis dimensions for the vehicle such as wheelbase, track, length, width, height, and weight.
3) Calculations of forces, resistance, acceleration, velocity, and brake power at different engine speeds and gear ratios.
4) Graphs showing the relationships between acceleration vs velocity, force vs velocity, torque vs engine speed, and brake power vs engine speed.
5) The performance of the vehicle is analyzed based on the graphs, concluding it can reach 100km/hr in 6-
The document contains field notes from a leveling and tachometric surveying exercise. It includes:
- Leveling readings taken along a route to determine reduced levels at stations.
- Tachometric staff readings taken from an instrument set up to survey cross sections of a bridge and sections upstream and downstream.
- Horizontal distances, vertical distances, and reduced levels were recorded at points along the cross sections.
The document provides statistics and information about transportation projects and transit services in the Town of Milton. It summarizes ridership growth for Milton Transit from 2010 to 2013. It also outlines the town's current transportation projects, details of Milton Transit routes and services, and monthly performance statistics for transit ridership from January 2013 to July 2013. Charts are included showing trends in service hours, ridership, costs and revenues for Milton Transit over recent years.
This document contains the model parameters for a 0.25um CMOS process from TSMC. It includes parameters for both NMOS and PMOS transistors. The parameters define the transistor characteristics and behavior. Some key parameters include threshold voltage, mobility, saturation velocity, junction capacitances, and short channel effects.
This document contains field observation data from a theodolite survey including station lines, interior angles, bearings, coordinates, and calculations of corrected interior angles and coordinates. It lists 10 stations with their line lengths, observed and corrected interior angles, calculated bearings, and total and corrected latitude and departure coordinates. It also shows the calculation of the total interior angle error and equal distribution of the correction to each station interior angle.
Volvo EC55B Compact Excavator Service Repair Manualfujdfjjskrtekme
This document provides service information for an excavator including:
1) Locations of key components on the excavator and descriptions of each.
2) Conversion tables for common measurement units of length, area, volume, weight, pressure, temperature and flow rate.
3) Specifications for the start switch, battery disconnector switch, and standard tightening torques for screws and nuts.
Study on baltim field,b.sc graduation project 2015, by atam teamPE Mahmoud Jad
This document discusses petroleum engineering as a career. It covers the following key points:
- Petroleum engineering involves the production of hydrocarbons like oil and gas. It covers activities from exploration and production to refining.
- The field requires knowledge of disciplines like geology, geophysics, drilling, reservoir simulation, and economics. Engineers also need skills in using computer systems and automation.
- Duties of petroleum engineers include locating drill sites, setting up extraction machinery, and overseeing safe and efficient extraction and processing of petroleum products.
This document contains the results of various physical evaluations for an athlete named Juan Pablo Marsicano. It includes measurements of his speed over various distances from 5 meters to 30 meters. It also evaluates his speed when changing direction to the left and right. Further evaluations measure his jumping ability in tests like squat jumps and countermovement jumps on a force platform. Repetitive jump tests and overhead strength comparisons to his own bodyweight are also included. The document concludes with an evaluation of his intermittent endurance over 1000 meters and heart rate recovery times.
The document provides specifications and performance calculations for a BMW 740li vehicle. It includes:
1) Engine specifications such as displacement, power, torque, and transmission gear ratios.
2) Chassis dimensions for the vehicle such as wheelbase, track, length, width, height, and weight.
3) Calculations of forces, resistance, acceleration, velocity, and brake power at different engine speeds and gear ratios.
4) Graphs showing the relationships between acceleration vs velocity, force vs velocity, torque vs engine speed, and brake power vs engine speed.
5) The performance of the vehicle is analyzed based on the graphs, concluding it can reach 100km/hr in 6-
This document contains tables with information for determining values of Yn and σn using the Gumbel Type I method and values of K for the log Pearson Type III distribution method. The log Pearson table lists K factor values for different recurrence intervals in years and skewness coefficients ranging from -3 to -1 and 1 to 3. The table can be used to determine K values based on the weighted skew coefficient and desired exceedance probability or return period.
The students conducted a leveling fieldwork at Taylor's University to determine the reduced levels of checkpoints. They took backsight, intersight and foresight readings and calculated the reduced levels using rise and fall and height of collimation methods. An error of 30mm was found upon closing the level loop. As this was within the acceptable error of 39.799mm, the work was accurate. The error was distributed equally among setups to adjust the final reduced levels. The experience provided hands-on training in using leveling instruments and fostered teamwork skills essential for their future careers.
This document summarizes a student group's fieldwork using an auto level to collect elevation data at 11 points. The objectives of the fieldwork were to gain experience using surveying equipment and understanding the surveying process. The group recorded raw elevation data using two methods and then adjusted the values to distribute errors under the allowable threshold of 39mm. The fieldwork was completed successfully with a total error of only 33mm.
This document summarizes a student group's fieldwork using an auto level to collect elevation data at 11 points. The objectives of the fieldwork were to gain experience using surveying equipment and understanding the surveying process. The group recorded raw elevation data using two different methods and then adjusted the values to distribute errors under the allowable threshold of 39mm. The summary concludes that the fieldwork was successfully completed with an obtained error of only 33mm, within the acceptable range.
This document contains a list of 81 coordinate points with their northing, easting, elevation, and description. It is part of a topographic survey for a project designing the water, sewer, and drainage systems for three sites in El Guabo Canton, Ecuador. The points appear to outline the path of an underground sewer or drainage pipe.
The document provides technical specifications and design details for an electric vehicle called ANDROSPHIN. It includes the vehicle's dimensions, weight, performance characteristics, component designs, analysis, and project planning. Key details are the vehicle's wheelbase of 1517.41mm, max speed of 60kmph, stopping distance of 7.867m, and total weight of 294kg. The chassis is made of AISI 4130 steel alloy. Components like the suspension, brakes, steering, and powertrain are also described in detail along with analysis of stresses and forces. The project timeline is outlined in a Gantt chart spanning 2017-2018.
The document provides technical specifications and design details for an all-terrain vehicle created by students at Gandhi Institute of Engineering & Technology, Gunupur. Key points include:
- The vehicle has a 1018 steel space frame, weighs 270kg, has a 65" wheelbase and 13" of ground clearance.
- Suspension is double wishbone with hydraulic springs and dampers. Brakes are hydraulic discs.
- The manual transmission has 4 gears. Top speed is 53kph and 0-53kph time is 21 seconds.
- Other details provided include roll cage dimensions, analysis, steering, suspension and brake designs, cost breakdown, and a project timeline.
This document contains numerical data across multiple years, including numbers in the thousands and hundreds ranges. It seems to provide some type of statistical information organized by year from 2008 to 2015, with the highest numbers occurring in 2010-2012 and the lowest in 2013.
The document provides information for calculating shear forces and bending moments for slabs and beams in a building. It includes slab dimensions, imposed loads, material properties, beam and column sizes, and calculated fixed end moments and shear force coefficients for various slab sections. Moment distribution factors are calculated for joints in the frame to determine internal bending moments. Shear forces are then calculated at each joint by summing moments equal to zero.
The document lists American Wire Gauge (AWG) wire sizes from 36 to 2000 in both imperial and metric units, providing the wire diameter, cross-sectional area, and standard size for each listing. Wire sizes range from 0.0050 inches to 2 inches in diameter, and include common wire gauges for solid copper conductors used in electrical work.
Handling Track Specifications Eng 18 09 08guest549892
The document describes four circuits - LONG, MEDIUM-A, MEDIUM-B, and SHORT - at an race track. It provides the length, reference lap times for sport cars and another vehicle, and number of left/right turns for each circuit. It also provides specifications for 26 curves around the track, including their length, radius, maximum slope and cross-sectional slope.
This document contains 15 tables that provide information on geographic and vertical transformation parameters used to transform coordinates between different datum and projections. Table 1 lists over 100 geographic (datum) transformations including their well-known IDs, typical accuracies in meters, and areas of use defined by minimum and maximum latitudes and longitudes. The tables provide transformation methods, parameters, and other details for coordinate transformations between different datum around the world.
The document is a chart listing American Wire Gauge (AWG) wire sizes. It provides information on the stranding/style, diameter, cross-sectional area, resistance, and weight for various wire gauges. Key specifications listed include the number of strands, gauge of individual strands, diameter and area of the overall wire, and resistance and weight of copper or tinned copper wire per 1,000 feet. The chart contains data for wire gauges 50 through 25.
The document outlines the pay scales and requirements for various engineering roles within All India Radio. It lists the pay grades and pay scales for positions like Senior Broadcast Engineer, Junior Broadcast Engineer, Broadcast Executive, Director of Engineering, Chief Engineer, and others. Requirements include engineering degrees, diplomas, years of experience, and exams needed for promotion to senior roles. Pay scales range from Rs. 3050-4590 for Helper/Khalasi to Rs. 22400-26000 for the Engineering-in-Chief position.
The document describes a student's levelling fieldwork report. It includes an introduction to levelling, the objectives and procedures of the fieldwork, definitions of levelling terms, raw and adjusted leveling data tables using the collimation and rise-and-fall methods, and a conclusion stating the fieldwork was successfully completed. The fieldwork allowed students to apply their theoretical knowledge of levelling techniques and gain practical surveying skills and experience through cooperative work.
This document provides information from a network adjustment project including the project name and date, coordinate system used, type of adjustment, number of known and unknown stations, observations and residuals. It lists the coordinates and standard deviations for each station as well as sample observation residuals from the adjustment.
This document provides physical characteristics and parameters of the Mantaro River basin in Peru. It includes the basin area (31,747 km2), average altitude (2,518 m), longest river length (14.145 km), and average rainfall by month between 1963-2018 based on data from the Quillabamba weather station. It also lists indices such as drainage density, stream order, and average slopes. In summary, it analyzes key hydrological metrics of the Mantaro River basin through tables of geographic and climatic data.
This document provides information from a surveying camp, including:
1. Coordinates of existing buildings that were determined through field observations.
2. A table of leveling observations and reduced levels taken along a ground profile.
3. Graphs plotting the building coordinates, ground profile, and layout of a simple circular curve determined through deflection angle calculations.
biaxial footing will have staad model interaction. with scroll system more than 100 load cases can be analysed & printed in separate sheet. saves considerable time
This document contains field data from a surveying exercise including stadia readings, horizontal angles, angular errors, distance and accuracy calculations, and coordinate adjustments. Stations A, B, C and D were surveyed and their coordinates were determined. Total angular error was found to be 29'30" which is unacceptable. Angular corrections were applied and distances, latitudes, departures and final coordinates were computed. The accuracy was calculated to be 1:127 which does not meet the required standard.
8. TREE ENUMERATION, CROP ASSESSMENT, BASAL AREA DETERMINATION, PHOTOGRAPHY &...RavindraSaksena
The document outlines the work plan for forest crop assessment of the Tara Coal Block in Madhya Pradesh, India. It details the methodology, including constituting two teams to take measurements in 73 sample plots over two days using equipment such as a wedge prism and Haga altimeter to determine basal area, height of dominant trees, and site quality. The teams will leave early morning on the 21st of May and require vehicles, motorbikes, and supplies to complete the long-day field work before the onset of monsoon season.
This document is a report from July 2014 that provides station-by-station details of a road improvement project in Junin, Peru. It includes the station number, cut/fill area, cut/fill volumes, and cumulative totals. The project improved the road from Chupuro to Vista Alegre to Chicche to Chongos Alto to Huasicancha. It was supervised by engineer Ruben Hugo Garcia Abregu.
This document contains tables with information for determining values of Yn and σn using the Gumbel Type I method and values of K for the log Pearson Type III distribution method. The log Pearson table lists K factor values for different recurrence intervals in years and skewness coefficients ranging from -3 to -1 and 1 to 3. The table can be used to determine K values based on the weighted skew coefficient and desired exceedance probability or return period.
The students conducted a leveling fieldwork at Taylor's University to determine the reduced levels of checkpoints. They took backsight, intersight and foresight readings and calculated the reduced levels using rise and fall and height of collimation methods. An error of 30mm was found upon closing the level loop. As this was within the acceptable error of 39.799mm, the work was accurate. The error was distributed equally among setups to adjust the final reduced levels. The experience provided hands-on training in using leveling instruments and fostered teamwork skills essential for their future careers.
This document summarizes a student group's fieldwork using an auto level to collect elevation data at 11 points. The objectives of the fieldwork were to gain experience using surveying equipment and understanding the surveying process. The group recorded raw elevation data using two methods and then adjusted the values to distribute errors under the allowable threshold of 39mm. The fieldwork was completed successfully with a total error of only 33mm.
This document summarizes a student group's fieldwork using an auto level to collect elevation data at 11 points. The objectives of the fieldwork were to gain experience using surveying equipment and understanding the surveying process. The group recorded raw elevation data using two different methods and then adjusted the values to distribute errors under the allowable threshold of 39mm. The summary concludes that the fieldwork was successfully completed with an obtained error of only 33mm, within the acceptable range.
This document contains a list of 81 coordinate points with their northing, easting, elevation, and description. It is part of a topographic survey for a project designing the water, sewer, and drainage systems for three sites in El Guabo Canton, Ecuador. The points appear to outline the path of an underground sewer or drainage pipe.
The document provides technical specifications and design details for an electric vehicle called ANDROSPHIN. It includes the vehicle's dimensions, weight, performance characteristics, component designs, analysis, and project planning. Key details are the vehicle's wheelbase of 1517.41mm, max speed of 60kmph, stopping distance of 7.867m, and total weight of 294kg. The chassis is made of AISI 4130 steel alloy. Components like the suspension, brakes, steering, and powertrain are also described in detail along with analysis of stresses and forces. The project timeline is outlined in a Gantt chart spanning 2017-2018.
The document provides technical specifications and design details for an all-terrain vehicle created by students at Gandhi Institute of Engineering & Technology, Gunupur. Key points include:
- The vehicle has a 1018 steel space frame, weighs 270kg, has a 65" wheelbase and 13" of ground clearance.
- Suspension is double wishbone with hydraulic springs and dampers. Brakes are hydraulic discs.
- The manual transmission has 4 gears. Top speed is 53kph and 0-53kph time is 21 seconds.
- Other details provided include roll cage dimensions, analysis, steering, suspension and brake designs, cost breakdown, and a project timeline.
This document contains numerical data across multiple years, including numbers in the thousands and hundreds ranges. It seems to provide some type of statistical information organized by year from 2008 to 2015, with the highest numbers occurring in 2010-2012 and the lowest in 2013.
The document provides information for calculating shear forces and bending moments for slabs and beams in a building. It includes slab dimensions, imposed loads, material properties, beam and column sizes, and calculated fixed end moments and shear force coefficients for various slab sections. Moment distribution factors are calculated for joints in the frame to determine internal bending moments. Shear forces are then calculated at each joint by summing moments equal to zero.
The document lists American Wire Gauge (AWG) wire sizes from 36 to 2000 in both imperial and metric units, providing the wire diameter, cross-sectional area, and standard size for each listing. Wire sizes range from 0.0050 inches to 2 inches in diameter, and include common wire gauges for solid copper conductors used in electrical work.
Handling Track Specifications Eng 18 09 08guest549892
The document describes four circuits - LONG, MEDIUM-A, MEDIUM-B, and SHORT - at an race track. It provides the length, reference lap times for sport cars and another vehicle, and number of left/right turns for each circuit. It also provides specifications for 26 curves around the track, including their length, radius, maximum slope and cross-sectional slope.
This document contains 15 tables that provide information on geographic and vertical transformation parameters used to transform coordinates between different datum and projections. Table 1 lists over 100 geographic (datum) transformations including their well-known IDs, typical accuracies in meters, and areas of use defined by minimum and maximum latitudes and longitudes. The tables provide transformation methods, parameters, and other details for coordinate transformations between different datum around the world.
The document is a chart listing American Wire Gauge (AWG) wire sizes. It provides information on the stranding/style, diameter, cross-sectional area, resistance, and weight for various wire gauges. Key specifications listed include the number of strands, gauge of individual strands, diameter and area of the overall wire, and resistance and weight of copper or tinned copper wire per 1,000 feet. The chart contains data for wire gauges 50 through 25.
The document outlines the pay scales and requirements for various engineering roles within All India Radio. It lists the pay grades and pay scales for positions like Senior Broadcast Engineer, Junior Broadcast Engineer, Broadcast Executive, Director of Engineering, Chief Engineer, and others. Requirements include engineering degrees, diplomas, years of experience, and exams needed for promotion to senior roles. Pay scales range from Rs. 3050-4590 for Helper/Khalasi to Rs. 22400-26000 for the Engineering-in-Chief position.
The document describes a student's levelling fieldwork report. It includes an introduction to levelling, the objectives and procedures of the fieldwork, definitions of levelling terms, raw and adjusted leveling data tables using the collimation and rise-and-fall methods, and a conclusion stating the fieldwork was successfully completed. The fieldwork allowed students to apply their theoretical knowledge of levelling techniques and gain practical surveying skills and experience through cooperative work.
This document provides information from a network adjustment project including the project name and date, coordinate system used, type of adjustment, number of known and unknown stations, observations and residuals. It lists the coordinates and standard deviations for each station as well as sample observation residuals from the adjustment.
This document provides physical characteristics and parameters of the Mantaro River basin in Peru. It includes the basin area (31,747 km2), average altitude (2,518 m), longest river length (14.145 km), and average rainfall by month between 1963-2018 based on data from the Quillabamba weather station. It also lists indices such as drainage density, stream order, and average slopes. In summary, it analyzes key hydrological metrics of the Mantaro River basin through tables of geographic and climatic data.
This document provides information from a surveying camp, including:
1. Coordinates of existing buildings that were determined through field observations.
2. A table of leveling observations and reduced levels taken along a ground profile.
3. Graphs plotting the building coordinates, ground profile, and layout of a simple circular curve determined through deflection angle calculations.
biaxial footing will have staad model interaction. with scroll system more than 100 load cases can be analysed & printed in separate sheet. saves considerable time
This document contains field data from a surveying exercise including stadia readings, horizontal angles, angular errors, distance and accuracy calculations, and coordinate adjustments. Stations A, B, C and D were surveyed and their coordinates were determined. Total angular error was found to be 29'30" which is unacceptable. Angular corrections were applied and distances, latitudes, departures and final coordinates were computed. The accuracy was calculated to be 1:127 which does not meet the required standard.
8. TREE ENUMERATION, CROP ASSESSMENT, BASAL AREA DETERMINATION, PHOTOGRAPHY &...RavindraSaksena
The document outlines the work plan for forest crop assessment of the Tara Coal Block in Madhya Pradesh, India. It details the methodology, including constituting two teams to take measurements in 73 sample plots over two days using equipment such as a wedge prism and Haga altimeter to determine basal area, height of dominant trees, and site quality. The teams will leave early morning on the 21st of May and require vehicles, motorbikes, and supplies to complete the long-day field work before the onset of monsoon season.
This document is a report from July 2014 that provides station-by-station details of a road improvement project in Junin, Peru. It includes the station number, cut/fill area, cut/fill volumes, and cumulative totals. The project improved the road from Chupuro to Vista Alegre to Chicche to Chongos Alto to Huasicancha. It was supervised by engineer Ruben Hugo Garcia Abregu.
This document provides an overview of the key information needed to perform a satellite link budget analysis. It discusses the various parameters that must be accounted for, such as location, frequency, antenna characteristics, rain attenuation levels, coupling and mispointing losses. Tables of rain attenuation values for different frequency bands and climatic zones are also presented. The document aims to explain all of the relevant factors that impact satellite communication links and must be considered in a link budget calculation.
1) The document describes a field work report for an engineering survey levelling practical. It includes an introduction to levelling, materials used, rise and fall method examples, procedures, collected data, analysis of the data including arithmetic checking and correction of reduced levels, and a practical on long section, cross section, and contour surveying.
2) The report details the procedures for taking staff readings at stations using an automatic level to determine elevation differences between points and reduced levels. Arithmetic checking is used to calculate misclosure and corrections.
3) Data is presented from the levelling practical using the rise and fall method to compute reduced levels at stations. Analysis shows the arithmetic checking and steps to calculate corrections to the reduced levels
This document provides specifications for wide flange steel shapes, including:
1) Dimensional specifications and properties like cross-sectional area, moments of inertia, radii of gyration, and modulus of section for various steel sizes.
2) Tolerances for dimensions of widths, depths, thicknesses.
3) Chemical composition and mechanical properties for different grades of steel.
4) Table of weights in kg/m and kg/12m for common hot rolled beam, wide flange, and H-beam sizes.
त्रिभुवन विश्वविद्यालय शिक्षा परिषद मानविकी संकाय अन्र्तगत द्वितिय वर्ष वि.ए समाज शास्त्रको ३० पुर्णाङ्कको परिपूर्ती यो अध्ययन तयार पारिएको हो। यस अध्ययनको लागि देवचुली नगरपालिका वडा नं १० को विकास निर्माण कार्यमा महिलाहरुको भूमिका सम्बन्धी यो प्रतिवेदन तयार पारेकी छु ।
प्रस्तुत “विकास निर्माण कार्यमा महिलाहरुको सहभागिताको अध्ययन” प्रतिवेदन तयार पार्नको निम्ति आवश्यक सल्लाह सुझावहरु दिएर सहयोग गर्नुहुने हाम्रा आदरणिय शिक्षक श्रीमान् करुण लम्साल ज्यू, श्रीमान् उद्यराज सिग्देल ज्यू प्रति आभारी छु । साथै यस कार्यका लागि आफ्ना व्यस्त समयको बाबजुद तथ्याङ्क संकलन तथा टिपणीको सिलसिलामा सोधिएका प्रश्नहरुको उत्तर दिएर सहयोग पु¥याउनुहुने देवचुली नगरपालिका वडा नं १० नवलपुरका प्रत्यक्ष घर परिवारलाई हार्दिक आभार व्यक्त गर्दछु ।
अन्त्यमा यस लेख्नलाई प्रिन्ट तथा सम्पादन गरि सहयोग गरिदिनु हुने भट्टराई कम्युनिकेसन प्रो.राम प्रसाद भट्टराई ज्यूलाई कृतज्ञाता प्रकट गर्दछु ।
Content;
1. Top spherical dome.
2. Top ring beam.
3. Cylindrical wall.
4. Bottom ring beam.
5. Conical dome.
6. Circular ring beam.
The basics of enticing water tank design and the related components are broadly calculated in this document. The next few documents will demonstrate the design of Intze tank members like column, bracing and foundation. Keep following the updates.....
The document discusses numerical simulation of flow through an open channel with a series of groins. It presents the methodology used, which involves simulating flow fields using the 2D numerical model iRIC Nays2DH. Simulation is conducted for series of impermeable, permeable and combined groins placed in a straight channel. The velocity profiles, streamlines and velocity magnitudes around the different groin configurations are compared. The results show that combined groins influence favorable flow fields compared to impermeable and permeable groins alone.
It is a Thesis of B.Sc Civil by Suman Jyoti
info.sumn.ce@gmail.com
Dhaka University of Engineering and Technology, Gazipur
Thesis of numerical simulation of flow through open channel with series of Groins
Suman Jyoti
Madan Ashrit Memorial Technical Collage. Gothatar, Kathmandu
The Report Includes:-
Building (Drawing, Theory and Estimation)
Highway ( Detailing, Theory and Calculation)
Sanitary ( ( Detailing, Theory and Calculation)
Irrigation (Theory only)
01 Determination of Normal Consistency of Cement.
02 Determination of Initial and Final Setting Time of
Cement by Vicat Apparatus.
03 Determination of Specific Gravity and Water
Absorption Capacity of Fine Aggregate.
04 Determination of Specific Gravity and Water
Absorption Capacity of Coarse Aggregate.
05 Determination of Total Evaporable Moisture Content
of Aggregate by Drying.
06 Gradation of Fine and Coarse Aggregates.
07Determination of Bulk Unit weight and Voids in
Coarse and Fine Aggregates.
Determination of Compressive Strength of Cement
Mortar.
Determination of Tensile Strength of Cement Mortar.
10 Determination of Slump of Fresh Concrete (Influence
of w/c ratio on Cement Concrete)
11Determination of Compressive Strength of Cement
Concrete.
12 Determination of Splitting Tensile Strength of
Cylindrical Concrete Specimens.
13 Determination of Flexural Strength of Concrete using
Simple Beam.
14 Determination of Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the
Los Angeles Machine.
SUMAN JYOTI
info.sumn.ce
Dhaka University of Engineering and Technology, Gazipur
Suman Jyoti
Dhaka university of Engineering and Technology
Cement: Properties, uses and types, manufacturing methods, reaction taking place during burning of raw materials in the rotary kiln, Setting and hardening time of cement;
Aggregates are granular materials like sand, gravel, or crushed stone used with water and cement to make concrete. They come in two sizes: fine aggregates smaller than 5 mm and coarse aggregates larger than 5 mm. Aggregates provide strength, reduce cracking, and lower the cost of concrete. They are selected based on being hard, durable, and free of organic materials or other substances that could weaken the concrete. Aggregates are classified by size, manufacturing method, and density. Physical tests are conducted to determine properties like strength, hardness, porosity, and grading.
Here are the key similarities and differences between microeconomics and macroeconomics:
Similarities:
- Both use basic economic concepts like supply and demand
- Microeconomic decisions and behaviors aggregate to impact macroeconomic outcomes
Differences:
- Scope - Micro focuses on individual agents/markets, macro looks at the overall economy
- Units of analysis - Micro examines prices, macro examines metrics like GDP, unemployment
- Goals - Micro aims to understand pricing and resource allocation, macro aims to achieve full employment, stable prices, economic growth
- Tools - Micro uses supply/demand, macro uses models like IS-LM and AS-AD curves
So in summary, while they use some similar foundations, microeconomics
This document provides tips and examples for speaking skills, vocabulary, explanations, and expressing agreement and disagreement.
It begins with gap fillers, technical words, and examples that can be used while speaking. It then provides vocabulary on various topics like environment, shopping, weather, music and more. Next, it gives examples of explanations on positive thinking, impact of technology, and self-confidence. Finally, it lists expressions that can be used for agreeing, disagreeing, stating opinions, and asking for opinions. The document aims to enhance public speaking skills through providing useful phrases and words.
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.
Sri Guru Hargobind Ji - Bandi Chor Guru.pdfBalvir Singh
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
Applications of artificial Intelligence in Mechanical Engineering.pdfAtif Razi
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
Determination of Equivalent Circuit parameters and performance characteristic...pvpriya2
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
Accident detection system project report.pdfKamal Acharya
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Blood finder application project report (1).pdfKamal Acharya
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...PriyankaKilaniya
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...DharmaBanothu
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
Digital Twins Computer Networking Paper Presentation.pptxaryanpankaj78
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.