This document is a report from July 2014 that provides station-by-station details of a road improvement project in Junin, Peru. It includes the station number, cut/fill area, cut/fill volumes, and cumulative totals. The project improved the road from Chupuro to Vista Alegre to Chicche to Chongos Alto to Huasicancha. It was supervised by engineer Ruben Hugo Garcia Abregu.
The document contains survey data from a road construction project including coordinates, elevations, cut depths, embankment heights, and volumes of material removed and placed at regular intervals along the road. The data is presented in a table with distance along the road in the first column and corresponding coordinate, elevation, cut, embankment and volume metrics in subsequent columns.
This document appears to contain numeric data recorded in 30 second intervals that includes x and y coordinates and a z value. There are a total of 159 data points recorded over the course of 8,000 seconds.
Study on baltim field,b.sc graduation project 2015, by atam teamPE Mahmoud Jad
This document discusses petroleum engineering as a career. It covers the following key points:
- Petroleum engineering involves the production of hydrocarbons like oil and gas. It covers activities from exploration and production to refining.
- The field requires knowledge of disciplines like geology, geophysics, drilling, reservoir simulation, and economics. Engineers also need skills in using computer systems and automation.
- Duties of petroleum engineers include locating drill sites, setting up extraction machinery, and overseeing safe and efficient extraction and processing of petroleum products.
This document contains a table listing trigonometric ratios including sine, cosine, and tangent values for angles from 1 to 89 degrees. The table is organized with the angle in the first column, followed by the corresponding sine, cosine and tangent values in subsequent columns. It provides the trigonometric ratios for a wide range of common angles.
Laporan 1 Sistem dan Signal (DFT Ms. Excel)Bayu Nurcahyo
Menganalisis gelombang suara manusia dengan merekam suara bernada diatonis pada Software Spectraplus V5.0. lalu mencari persamaan gelombang dengan bantuan pengolahan data Ms. Excel
The document contains two tables providing future value interest factors for one dollar and one dollar annuities compounded at various interest rates over different periods of time. Table A-1 shows the future value of $1 invested at rates from 1% to 30% over periods from 1 to 30 years. Table A-2 shows the future value of a $1 annuity invested at the same rates and periods. The tables allow users to determine the future values of single investments and annuities based on the interest rate and time period.
The document contains two tables providing future value interest factors for present values compounded over time at given interest rates. Table A-1 gives the future value of $1 invested for a given number of periods at rates from 1% to 30%. Table A-2 gives the future value of a $1 annuity invested over the same periods and rates. Both tables allow users to determine the future value of investments based on the interest rate and length of time compounded.
The document contains two tables providing future value interest factors for one dollar and one dollar annuities compounded at various interest rates over different periods of time. Table A-1 shows the future value of $1 invested at rates from 1% to 30% over periods from 1 to 30 years. Table A-2 shows the future value of a $1 annuity invested at the same rates and periods. The tables allow users to determine the future values of single investments and annuities based on the interest rate and time horizon.
The document contains survey data from a road construction project including coordinates, elevations, cut depths, embankment heights, and volumes of material removed and placed at regular intervals along the road. The data is presented in a table with distance along the road in the first column and corresponding coordinate, elevation, cut, embankment and volume metrics in subsequent columns.
This document appears to contain numeric data recorded in 30 second intervals that includes x and y coordinates and a z value. There are a total of 159 data points recorded over the course of 8,000 seconds.
Study on baltim field,b.sc graduation project 2015, by atam teamPE Mahmoud Jad
This document discusses petroleum engineering as a career. It covers the following key points:
- Petroleum engineering involves the production of hydrocarbons like oil and gas. It covers activities from exploration and production to refining.
- The field requires knowledge of disciplines like geology, geophysics, drilling, reservoir simulation, and economics. Engineers also need skills in using computer systems and automation.
- Duties of petroleum engineers include locating drill sites, setting up extraction machinery, and overseeing safe and efficient extraction and processing of petroleum products.
This document contains a table listing trigonometric ratios including sine, cosine, and tangent values for angles from 1 to 89 degrees. The table is organized with the angle in the first column, followed by the corresponding sine, cosine and tangent values in subsequent columns. It provides the trigonometric ratios for a wide range of common angles.
Laporan 1 Sistem dan Signal (DFT Ms. Excel)Bayu Nurcahyo
Menganalisis gelombang suara manusia dengan merekam suara bernada diatonis pada Software Spectraplus V5.0. lalu mencari persamaan gelombang dengan bantuan pengolahan data Ms. Excel
The document contains two tables providing future value interest factors for one dollar and one dollar annuities compounded at various interest rates over different periods of time. Table A-1 shows the future value of $1 invested at rates from 1% to 30% over periods from 1 to 30 years. Table A-2 shows the future value of a $1 annuity invested at the same rates and periods. The tables allow users to determine the future values of single investments and annuities based on the interest rate and time period.
The document contains two tables providing future value interest factors for present values compounded over time at given interest rates. Table A-1 gives the future value of $1 invested for a given number of periods at rates from 1% to 30%. Table A-2 gives the future value of a $1 annuity invested over the same periods and rates. Both tables allow users to determine the future value of investments based on the interest rate and length of time compounded.
The document contains two tables providing future value interest factors for one dollar and one dollar annuities compounded at various interest rates over different periods of time. Table A-1 shows the future value of $1 invested at rates from 1% to 30% over periods from 1 to 30 years. Table A-2 shows the future value of a $1 annuity invested at the same rates and periods. The tables allow users to determine the future values of single investments and annuities based on the interest rate and time horizon.
The document contains two tables providing future value interest factors for present values compounded over time at given interest rates. Table A-1 gives the future value of $1 invested for a given number of periods at rates from 1% to 30%. Table A-2 gives the future value of a $1 annuity invested over the same periods and rates. The tables allow users to calculate future or present values of investments compounded at different rates over different lengths of time.
This document provides physical characteristics and parameters of the Mantaro River basin in Peru. It includes the basin area (31,747 km2), average altitude (2,518 m), longest river length (14.145 km), and average rainfall by month between 1963-2018 based on data from the Quillabamba weather station. It also lists indices such as drainage density, stream order, and average slopes. In summary, it analyzes key hydrological metrics of the Mantaro River basin through tables of geographic and climatic data.
The document is a conversion table that lists millimeter measurements from 0.01 to 100 in increments of 0.01 and their equivalent measurements in inches.
The document provides specifications and performance calculations for a BMW 740li vehicle. It includes:
1) Engine specifications such as displacement, power, torque, and transmission gear ratios.
2) Chassis dimensions for the vehicle such as wheelbase, track, length, width, height, and weight.
3) Calculations of forces, resistance, acceleration, velocity, and brake power at different engine speeds and gear ratios.
4) Graphs showing the relationships between acceleration vs velocity, force vs velocity, torque vs engine speed, and brake power vs engine speed.
5) The performance of the vehicle is analyzed based on the graphs, concluding it can reach 100km/hr in 6-
This document provides specifications for oilfield casing including sizes ranging from 7 3/4 to 13 5/8 inches, weights ranging from 16.6 to 88.2 lbs/ft, drift diameters, capacities in barrels per 100 feet, and other details. It lists physical properties and performance metrics for different casing strings to aid in well design and construction.
The document provides a conversion table for inches to millimeters. It lists inches in decimal and fractional increments from 0 inches to 1 inch in the left column. The corresponding millimeter measurements are listed in the right column. There are conversion values shown for 64ths of an inch up to 59/64 of an inch.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values for single payments, uniform series payments, and arithmetic gradient series using compound interest formulas. The number of periods, n, ranges from 1 to 480 or more. Corresponding factor values are provided for amounts, present worth, sinking funds, and more.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values for single payments, uniform series payments, and arithmetic gradient series using compound interest formulas. The number of periods, n, ranges from 1 to 480 or more. Corresponding factor values are provided for amounts, present worth, sinking funds, and more.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values of single payments, uniform series payments, and arithmetic gradient series payments over a range of time periods from 1 to 480 years.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values for single payments, uniform series payments, and arithmetic gradient series using compound interest formulas. The number of periods, n, ranges from 1 to 480 or more. Corresponding factor values are provided for amounts, present worth, sinking funds, and more.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values of single payments, uniform series payments, and arithmetic gradient series payments over a range of time periods from 1 to 480 years.
This document provides specifications for wide flange steel shapes, including:
1) Dimensional specifications and properties like cross-sectional area, moments of inertia, radii of gyration, and modulus of section for various steel sizes.
2) Tolerances for dimensions of widths, depths, thicknesses.
3) Chemical composition and mechanical properties for different grades of steel.
4) Table of weights in kg/m and kg/12m for common hot rolled beam, wide flange, and H-beam sizes.
The document contains a table of numbers organized in rows and columns. The first column contains probability values from 0.1 to 0.005 decreasing by factors of 2. The remaining columns contain sets of numbers that decrease as the probability values decrease.
The document lists American Wire Gauge (AWG) wire sizes from 36 to 2000 in both imperial and metric units, providing the wire diameter, cross-sectional area, and standard size for each listing. Wire sizes range from 0.0050 inches to 2 inches in diameter, and include common wire gauges for solid copper conductors used in electrical work.
The document appears to contain numerical data across multiple categories including potential threats, equipment types, response times, and other factors. The data includes 77 entries with values ranging from -0.087866 to 0.246748 for the first category. Location or device-based data is also included for some categories.
This document contains tables of compound interest factors for interest rates of 0.25% and 0.5% compounded annually over various time periods from 1 to 480 years. The tables show the compound amount, present worth, sinking fund, capital recovery, uniform series, and gradient factors for single payments, arithmetic gradients, and present worth calculations.
The document provides a table of thermophysical properties of refrigerant 22 (chlorodifluoromethane) at various temperatures ranging from -100°C to 32°C. For each temperature, the table lists properties of saturated liquid and saturated vapor including pressure, density, enthalpy, entropy, specific heat, and more. The extensive table acts as a reference for engineers to look up refrigerant 22 properties under different temperature conditions.
This document provides specifications for various standard H-beam, wide flange, lip channel, and equal angle steel sections. It includes dimensions such as height, width, thickness, area, weight, moments of inertia, radii of gyration, and other geometric properties. Sections range in size from 100x100 mm to 588x300 mm for H-beams, 148x100 mm to 500x200 mm for wide flanges, 100x50x20 mm to 200x75x20 mm for lip channels, and 40x40 mm to 120x120 mm for equal angles. Properties are specified in metric units.
Ejercicio metodo simplificado de edificio de 4 niveleshooke007
This document summarizes the analysis of a 4-level building. It provides calculations of lateral loads, shear forces, and vertical resistance for the X and Y structural elements. The analysis finds that the current configuration does not support 4 levels, so a modified 3-level design will be studied. Key values include:
- Total lateral load of 2,307.61 tons
- Required vertical resistance of 411.28 tons (Y element) and 426.69 tons (X element)
- Allowable shear value of 406.16 tons
El documento describe los procedimientos para el relleno de zanjas y estructuras como parte de un proyecto de mejoramiento del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Se especifican los tipos y métodos de relleno, incluyendo el uso de material selecto y compactación, así como anexos que detallan pruebas y especificaciones de suelos.
Este documento presenta las especificaciones técnicas generales para el mejoramiento del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Incluye 22 secciones que describen aspectos como descripción general de las obras proyectadas, objetivo y organización de las especificaciones, normatividad y disposiciones, generalidades, excavaciones, rellenos, obras de concreto, accesorios, estructuras de acero, instalaciones eléctricas e hidráulicas, y pruebas.
The document contains two tables providing future value interest factors for present values compounded over time at given interest rates. Table A-1 gives the future value of $1 invested for a given number of periods at rates from 1% to 30%. Table A-2 gives the future value of a $1 annuity invested over the same periods and rates. The tables allow users to calculate future or present values of investments compounded at different rates over different lengths of time.
This document provides physical characteristics and parameters of the Mantaro River basin in Peru. It includes the basin area (31,747 km2), average altitude (2,518 m), longest river length (14.145 km), and average rainfall by month between 1963-2018 based on data from the Quillabamba weather station. It also lists indices such as drainage density, stream order, and average slopes. In summary, it analyzes key hydrological metrics of the Mantaro River basin through tables of geographic and climatic data.
The document is a conversion table that lists millimeter measurements from 0.01 to 100 in increments of 0.01 and their equivalent measurements in inches.
The document provides specifications and performance calculations for a BMW 740li vehicle. It includes:
1) Engine specifications such as displacement, power, torque, and transmission gear ratios.
2) Chassis dimensions for the vehicle such as wheelbase, track, length, width, height, and weight.
3) Calculations of forces, resistance, acceleration, velocity, and brake power at different engine speeds and gear ratios.
4) Graphs showing the relationships between acceleration vs velocity, force vs velocity, torque vs engine speed, and brake power vs engine speed.
5) The performance of the vehicle is analyzed based on the graphs, concluding it can reach 100km/hr in 6-
This document provides specifications for oilfield casing including sizes ranging from 7 3/4 to 13 5/8 inches, weights ranging from 16.6 to 88.2 lbs/ft, drift diameters, capacities in barrels per 100 feet, and other details. It lists physical properties and performance metrics for different casing strings to aid in well design and construction.
The document provides a conversion table for inches to millimeters. It lists inches in decimal and fractional increments from 0 inches to 1 inch in the left column. The corresponding millimeter measurements are listed in the right column. There are conversion values shown for 64ths of an inch up to 59/64 of an inch.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values for single payments, uniform series payments, and arithmetic gradient series using compound interest formulas. The number of periods, n, ranges from 1 to 480 or more. Corresponding factor values are provided for amounts, present worth, sinking funds, and more.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values for single payments, uniform series payments, and arithmetic gradient series using compound interest formulas. The number of periods, n, ranges from 1 to 480 or more. Corresponding factor values are provided for amounts, present worth, sinking funds, and more.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values of single payments, uniform series payments, and arithmetic gradient series payments over a range of time periods from 1 to 480 years.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values for single payments, uniform series payments, and arithmetic gradient series using compound interest formulas. The number of periods, n, ranges from 1 to 480 or more. Corresponding factor values are provided for amounts, present worth, sinking funds, and more.
This document contains tables of compound interest factors for interest rates of 1/4%, 1/2%, and 3/4% compounded annually. The tables show the factors needed to calculate future and present values of single payments, uniform series payments, and arithmetic gradient series payments over a range of time periods from 1 to 480 years.
This document provides specifications for wide flange steel shapes, including:
1) Dimensional specifications and properties like cross-sectional area, moments of inertia, radii of gyration, and modulus of section for various steel sizes.
2) Tolerances for dimensions of widths, depths, thicknesses.
3) Chemical composition and mechanical properties for different grades of steel.
4) Table of weights in kg/m and kg/12m for common hot rolled beam, wide flange, and H-beam sizes.
The document contains a table of numbers organized in rows and columns. The first column contains probability values from 0.1 to 0.005 decreasing by factors of 2. The remaining columns contain sets of numbers that decrease as the probability values decrease.
The document lists American Wire Gauge (AWG) wire sizes from 36 to 2000 in both imperial and metric units, providing the wire diameter, cross-sectional area, and standard size for each listing. Wire sizes range from 0.0050 inches to 2 inches in diameter, and include common wire gauges for solid copper conductors used in electrical work.
The document appears to contain numerical data across multiple categories including potential threats, equipment types, response times, and other factors. The data includes 77 entries with values ranging from -0.087866 to 0.246748 for the first category. Location or device-based data is also included for some categories.
This document contains tables of compound interest factors for interest rates of 0.25% and 0.5% compounded annually over various time periods from 1 to 480 years. The tables show the compound amount, present worth, sinking fund, capital recovery, uniform series, and gradient factors for single payments, arithmetic gradients, and present worth calculations.
The document provides a table of thermophysical properties of refrigerant 22 (chlorodifluoromethane) at various temperatures ranging from -100°C to 32°C. For each temperature, the table lists properties of saturated liquid and saturated vapor including pressure, density, enthalpy, entropy, specific heat, and more. The extensive table acts as a reference for engineers to look up refrigerant 22 properties under different temperature conditions.
This document provides specifications for various standard H-beam, wide flange, lip channel, and equal angle steel sections. It includes dimensions such as height, width, thickness, area, weight, moments of inertia, radii of gyration, and other geometric properties. Sections range in size from 100x100 mm to 588x300 mm for H-beams, 148x100 mm to 500x200 mm for wide flanges, 100x50x20 mm to 200x75x20 mm for lip channels, and 40x40 mm to 120x120 mm for equal angles. Properties are specified in metric units.
Ejercicio metodo simplificado de edificio de 4 niveleshooke007
This document summarizes the analysis of a 4-level building. It provides calculations of lateral loads, shear forces, and vertical resistance for the X and Y structural elements. The analysis finds that the current configuration does not support 4 levels, so a modified 3-level design will be studied. Key values include:
- Total lateral load of 2,307.61 tons
- Required vertical resistance of 411.28 tons (Y element) and 426.69 tons (X element)
- Allowable shear value of 406.16 tons
El documento describe los procedimientos para el relleno de zanjas y estructuras como parte de un proyecto de mejoramiento del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Se especifican los tipos y métodos de relleno, incluyendo el uso de material selecto y compactación, así como anexos que detallan pruebas y especificaciones de suelos.
Este documento presenta las especificaciones técnicas generales para el mejoramiento del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Incluye 22 secciones que describen aspectos como descripción general de las obras proyectadas, objetivo y organización de las especificaciones, normatividad y disposiciones, generalidades, excavaciones, rellenos, obras de concreto, accesorios, estructuras de acero, instalaciones eléctricas e hidráulicas, y pruebas.
Este documento describe los procedimientos técnicos para la instalación de tuberías PVC para fluidos a presión. Incluye especificaciones sobre el transporte, manipulado, almacenamiento y excavación de zanjas para la instalación de tuberías, así como detalles sobre la instalación, pruebas e instalación de accesorios. El objetivo es proporcionar lineamientos para garantizar la correcta colocación e integridad de las tuberías para el sistema de agua potable.
Este documento presenta las especificaciones técnicas para las válvulas que se utilizarán en el sistema de alcantarillado del proyecto de mejoramiento del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Incluye requisitos para los materiales, suministro, almacenamiento, instalación y pruebas de las válvulas. Describe los tipos de válvulas requeridas como compuertas, mariposas y de retención, así como sus características y estándares
Este documento contiene las especificaciones técnicas para las obras de concreto que formarán parte del proyecto de mejoramiento del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Se describen los tipos de concreto, materiales, dosificación, refuerzo, mezclado, colocación, curado y pruebas. El documento proporciona detalles sobre cemento, agregados, aditivos, encofrados, transporte, juntas y tolerancias dimensionales para asegurar
El documento describe las especificaciones técnicas de los equipos e instalaciones eléctricas requeridas para la estación de bombeo del sistema de alcantarillado en Jepelacio, incluyendo válvulas, tuberías, cables, luminarias y tableros eléctricos. Se especifican detalles como materiales, normas, capacidades y dimensiones de cada componente para asegurar un sistema funcional y duradero.
Este documento describe las especificaciones técnicas para las obras provisionales y preliminares requeridas para la instalación del sistema de alcantarillado en la localidad de Jepelacio. Incluye detalles sobre la información para el trazo de las obras, áreas designadas, estructuras y servicios provisionales, acceso a propiedades adyacentes, saneamiento, drenaje de las obras, y asistencia para el personal del supervisor. El objetivo es garantizar la seguridad durante la construcción y minimizar las interferencias con las operaciones normales de la ciudad.
Este documento presenta las especificaciones técnicas para la mejora del sistema de agua potable e instalación del sistema de alcantarillado en la localidad de Jepelacio. Define términos clave, establece las normas y códigos aplicables, describe el alcance de las especificaciones y las responsabilidades del contratista. Además, detalla los planos de proyecto y los procedimientos para modificaciones, registros y aprobaciones durante la ejecución de la obra.
2. FINAL MEMORIA DESCRIPTIVA JEPELACIO.docleonidas518748
El documento describe un proyecto para instalar un sistema de alcantarillado en la localidad de Jepelacio en Perú. Actualmente, la población elimina sus aguas residuales en las calles y quebradas locales, lo que causa problemas de salud. El proyecto propone instalar una red de alcantarillado y una planta de tratamiento para recolectar y tratar las aguas residuales antes de descargarlas de manera segura. Esto mejorará las condiciones sanitarias y de salud de la población local de aproximadamente 3,000 habitantes
Este documento presenta el expediente técnico para el proyecto de mejoramiento de calles en el distrito de Ahuaycha, provincia de Tayacaja, Huancavelica. El proyecto consiste en la pavimentación y mejora del sistema de desagüe pluvial de varias calles en 7 sectores de la localidad. Se incluyen estudios topográficos, geológicos, y de tránsito vehicular, así como planos de la situación actual, diseños geométricos propuestos y especificaciones técnicas para la construcción.
Este documento presenta un estudio de impacto ambiental para el proyecto de mejoramiento de calles en el distrito de Ahuaycha, Huancavelica. El proyecto consiste en la construcción de vías vehiculares, veredas de concreto, badenes y áreas verdes en varias calles del distrito. Se identifican y evalúan los posibles impactos ambientales durante la construcción y operación, y se propondrán medidas de mitigación. La línea base ambiental describe el medio físico y biológico del área. El marco legal
Este informe describe las actividades de un ayudante de topografía en la supervisión de una obra de mejoramiento de carretera en Perú. Se realizó un levantamiento topográfico del km 18+000 al 35+000, procesamiento de datos, control de cortes de talud y revisión de planos de replanteo. Se encontró un exceso de corte en los planos del contratista y radios de curva menores a los mínimos especificados. El informe solicita el pago por los servicios prestados del 10 de octubre al 23 de noviembre
El documento presenta el informe de labores realizadas como topógrafo II en la obra de mejoramiento de la carretera Chupuro - Vista Alegre - Chicche - Chongos Alto - Huasicancha en el departamento de Junín entre el 25 de setiembre y el 8 de noviembre de 2014. Las labores incluyeron el levantamiento topográfico del tramo entre los km 18+000 y 35+000, la revisión de planos de replanteo presentados por el contratista que mostraban excesos de corte, y el control de cortes de tal
El documento presenta el informe de labores realizadas como topógrafo II en la obra de mejoramiento de la carretera Chupuro - Vista Alegre - Chicche - Chongos Alto - Huasicancha en el departamento de Junín entre el 25 de setiembre y el 8 de noviembre de 2014. Las labores incluyeron el levantamiento topográfico del tramo entre los km 18+000 y 35+000, la revisión de planos de replanteo presentados por el contratista que mostraban excesos de corte, y el control de cortes de tal
El documento es un informe de actividades realizado por un ayudante de topografía en una obra de mejoramiento de carretera en Perú. Describe las tareas de levantamiento topográfico, procesamiento de datos, revisión de planos de replanteo y control de cortes realizados entre el 10 de octubre y el 23 de noviembre de 2014. Se encontraron diferencias entre los volúmenes de corte autorizados y los planos del contratista, así como radios de curva menores a los mínimos permitidos. El ayudante solicita el pago correspond
El documento presenta el informe de labores realizadas como topógrafo II en la obra de mejoramiento de la carretera Chupuro - Huasicancha entre el 25 de setiembre y el 8 de noviembre de 2014. Se realizó el levantamiento topográfico del tramo entre los km 18+000 y 35+000, procesamiento de datos, control de cortes de talud y revisión de planos de replanteo presentados por el contratista, observándose excesos de corte y radios de curva menores a los especificados.
The document appears to be an engineering report on road improvements for a route in Peru. It includes tables reporting excavation quantities at 20 meter intervals along the route, including cubic meters of various materials removed. It lists the project name, location, and supervisor in charge at the top.
Los asientos describen el avance de las obras preliminares y de movimiento de tierra en el tramo I de una obra entre el 28 de enero y el 7 de febrero de 2014. Se realizaron topografía, mantenimiento vial y accesos. Se excavó material común usando excavadoras Komatsu y Caterpillar, transportando 1315-1710 m3 de material diario a un depósito entre los progresos 7+100 y 7+520.
CUADERNO OBRAS DEL MES DE MAYO ACTUALIZADO.......docxleonidas518748
El documento resume los avances de una obra de construcción en diferentes fechas. Se detalla el trabajo topográfico realizado como trazos, replanteos y levantamientos. También se describen las excavaciones realizadas en diferentes tramos, con indicación de maquinaria, volúmenes extraídos y supervisión. Por último, se mencionan las actividades de transporte y acondicionamiento de materiales sobrantes.
erified Ahmedabad Call Girls 💯Call Us 🔝 8094342248 🔝 💃 Independent Female Escort Service
ℂall Mrs Reena Ji +91-8094342248
We offer all types of girls of your ℂhoiℂe with spaℂe. Our esℂorts are fully ℂooperative and understand your needs. All types of ℂall girls like Housewives, ℂollege girls,#J11 Russian girls, Muslim girls, Afghani girls, Bengali girls, Working girls, south Indian girls, Punjabi girls, etℂ.j11
In-ℂall: — You ℂan Reaℂh At Our Plaℂe in Pune Our plaℂe Whiℂh Is Very ℂlean Hygieniℂ 100% safe Aℂℂommodation.
Out-ℂall: — Serviℂe for Out ℂall You have To ℂome Piℂk The Girl From My Plaℂe We Also Provide Door-Step Serviℂes
Hygieniℂ: — Full Aℂ Neat And ℂlean Rooms Available In Hotel 24 * 7 Hrs In Pune
Our Serviℂes and Rates: –
One Shot — 2500/in ℂall (time ½ hour), 5000/out ℂall
Two shot with one girl — 5000/in ℂall (time 1 hour), 6000/out ℂall
Body to body massage with sex- 3000/in ℂall (time 1 hour)
full night for one person– 8000/in ℂall, 10000/out ℂall (shot limit 4 shot)
We are available 24*7 all days of the year
ℂall us — 8094342248 !! Thank you for Visiting.
Science Text Book characteristics and libraryJerslin Muller
This ppt contains qualities of a good Science Text Book, need for text book, importance of text book, criteria of a science text book, text book analysis, content analysis, Hunter's score card, library, utilization of library.
Smoking as a preservation and processing method for food, Food preservation, food processing, smoking, meat and meat products, methods of food smoking, application, cold smoking, hot smoking, warm smoking, liquid smoking, food industry and business, offset smokers, upright drum smokers, Vertical water smokers, Propane smokers, Electrical smokers and related health concerns.
Mint Progressive Indian, located in downtown Seattle, offers a unique dining experience by blending traditional Indian flavors with modern culinary techniques. Our menu features innovative dishes crafted from the freshest ingredients, served in a chic and inviting atmosphere. Perfect for casual meals, romantic dinners, and special events, we pride ourselves on exceptional service and a vibrant dining experience. Join us at Mint Progressive Indian to explore the future of Indian cuisine. Visit Mint Progressive Indian for more information and reservations.
雅虎竞拍
煤炉代买
paypay商城
乐天二手
日本亚马逊
乐天新品
ZOZOTOWN
