This document contains tables with information for determining values of Yn and σn using the Gumbel Type I method and values of K for the log Pearson Type III distribution method. The log Pearson table lists K factor values for different recurrence intervals in years and skewness coefficients ranging from -3 to -1 and 1 to 3. The table can be used to determine K values based on the weighted skew coefficient and desired exceedance probability or return period.
The document provides tables of critical values for several statistical tests including the Grubbs test for outliers, Student's t-distribution, and the F-distribution. The tables give the critical values for these tests at various confidence levels (e.g. 90%, 95%, 99%) and for different numbers of observations or degrees of freedom.
This document appears to be a table containing random digits organized into lines. There are 141 lines shown, with each line containing 10 random digits. The table seems to be providing random number data for statistical analysis or simulation purposes.
This document contains tables of critical values for the z-distribution, t-distribution, and chi-square distribution. The z-table provides critical values for the standard normal distribution used in z-tests. The t-table gives critical values for the t-distribution used in t-tests based on degrees of freedom. And the chi-square table lists critical values for the chi-square distribution applied in chi-square tests.
This document provides a table listing the weights in kilograms per meter of seamless steel tubes of varying diameters and wall thicknesses according to DIN 2448. The table includes the outer diameter, standard wall thickness, weight in kg/m, and other dimensional specifications for over 50 tube sizes ranging from 10.2 mm outer diameter up to 558.8 mm outer diameter.
This document contains a parametric function definition of x=sin(t) and y=cos(t) along with a table of t, x, and y values ranging from 0 to 2π in increments of π/12.
This document provides a table of critical values for the t-distribution and F-distribution for various degrees of freedom and significance levels. The table lists the critical values for one-tailed and two-tailed tests with significance levels ranging from 0.2% to 20% for distributions with 1 to 100 degrees of freedom.
This table provides saturation pressure and temperature data for the refrigerant R-404A over a range of temperatures from -49°F to 150°F. It shows the liquid and vapor pressures and temperatures in both °F and °C at increments of 1°F from -49°F to 150°F. The data was generated using the NIST REFPROP Database.
This document contains a table listing basic values for L and H parameters corresponding to kinematic viscosity measurements in the 40-100°C system. The table includes kinematic viscosity values in mm2/s at 100°C along with the associated L and H parameters for determining kinematic viscosity at other temperatures between 40-100°C. There are over 70 rows of viscosity values ranging from 2 to 70 mm2/s at 100°C with calculations to estimate viscosity at different temperatures within the specified range.
The document provides tables of critical values for several statistical tests including the Grubbs test for outliers, Student's t-distribution, and the F-distribution. The tables give the critical values for these tests at various confidence levels (e.g. 90%, 95%, 99%) and for different numbers of observations or degrees of freedom.
This document appears to be a table containing random digits organized into lines. There are 141 lines shown, with each line containing 10 random digits. The table seems to be providing random number data for statistical analysis or simulation purposes.
This document contains tables of critical values for the z-distribution, t-distribution, and chi-square distribution. The z-table provides critical values for the standard normal distribution used in z-tests. The t-table gives critical values for the t-distribution used in t-tests based on degrees of freedom. And the chi-square table lists critical values for the chi-square distribution applied in chi-square tests.
This document provides a table listing the weights in kilograms per meter of seamless steel tubes of varying diameters and wall thicknesses according to DIN 2448. The table includes the outer diameter, standard wall thickness, weight in kg/m, and other dimensional specifications for over 50 tube sizes ranging from 10.2 mm outer diameter up to 558.8 mm outer diameter.
This document contains a parametric function definition of x=sin(t) and y=cos(t) along with a table of t, x, and y values ranging from 0 to 2π in increments of π/12.
This document provides a table of critical values for the t-distribution and F-distribution for various degrees of freedom and significance levels. The table lists the critical values for one-tailed and two-tailed tests with significance levels ranging from 0.2% to 20% for distributions with 1 to 100 degrees of freedom.
This table provides saturation pressure and temperature data for the refrigerant R-404A over a range of temperatures from -49°F to 150°F. It shows the liquid and vapor pressures and temperatures in both °F and °C at increments of 1°F from -49°F to 150°F. The data was generated using the NIST REFPROP Database.
This document contains a table listing basic values for L and H parameters corresponding to kinematic viscosity measurements in the 40-100°C system. The table includes kinematic viscosity values in mm2/s at 100°C along with the associated L and H parameters for determining kinematic viscosity at other temperatures between 40-100°C. There are over 70 rows of viscosity values ranging from 2 to 70 mm2/s at 100°C with calculations to estimate viscosity at different temperatures within the specified range.
This trigonometric table provides the values of sin, cos, tan, csc, sec, and cot for common angles from 0 to 360 degrees in increments of 15 degrees. It also provides the corresponding radian values. The table follows consistent patterns for the trigonometric functions across the angles.
This document contains a series of numbers with varying decimals. It does not provide any context or explanation for the meaning or purpose of the numbers. The high-level information that can be summarized is simply that the document contains numerical data without any accompanying description.
This document provides conversion factors between various units used to measure length, area, volume, mass, density, pressure, power, energy, specific energy, and heat capacity. Some key conversions include:
- 1 meter (m) = 3.28084 feet
- 1 square meter (m2) = 10.7639 square feet
- 1 cubic meter (m3) = 35.314 cubic feet
- 1 kilogram (kg) = 2.20462 pounds
- 1 pascal (Pa) = 0.000145038 pounds per square inch
The document contains monthly sales data from 1993 to 2007 for closed home sales, total sales volume, average home price, and average days on market. Some key trends highlighted in the data include:
- Closed home sales declined 7.63% from 2007 to 2008 but had generally increased each year from 1993 to 2006.
- Total sales volume peaked in 2006 but declined 1.49% in 2007 and 7.53% in 2008.
- The average home price increased over 71% from 2001 to 2007, with continuous annual growth over that period.
- The absorption rate, measuring the speed of home sales, fluctuated monthly but generally declined from the early 2000s figures.
The document appears to contain numeric data in a table with 7 rows and 8 columns. The columns include percentages of small, medium, and large vehicles; distance; carbon dioxide emissions for cars in each category; and total emissions. Row 2 shows the highest percentages of vehicles at 220, 210, and 129 and the highest total CO2 emissions at 308,843.17 kg. Row 5 and 6 are identical with the highest distance at 260 km and the same total CO2 emissions of 921,650.11 kg.
The document contains field notes from a leveling and tachometric surveying exercise. It includes:
- Leveling readings taken along a route to determine reduced levels at stations.
- Tachometric staff readings taken from an instrument set up to survey cross sections of a bridge and sections upstream and downstream.
- Horizontal distances, vertical distances, and reduced levels were recorded at points along the cross sections.
The document contains a code that should be copied into two text files named AccionesBonosUSA.txt. The code provides daily stock price and other financial data for various US companies and indices from 1987 to 1987. It lists dates, company ticker symbols, and corresponding price values.
The document provides critical values of the Studentized Range Distribution for various numbers of means and degrees of freedom at the 0.05 significance level. It includes a table with critical values ranging from 2 to 37 degrees of freedom and 2 to 20 means. The table gives the critical values needed to determine whether differences between multiple means are statistically significant.
The document is a z-score table that lists z-scores from -3.4 to 3.3 across the top and probability values from 0.00 to 0.09 down the left side. The table provides the area under the normal curve for each corresponding z-score and probability value.
The Science and Practice of Cartographic Interactionreroth
The document contains survey results from participants responding to questions in different categories. It includes a table with the sum and average scores for each question category (e.g. EMG, ENV, EPI) and total scores. Some categories like "How" received the highest total scores, while categories like "Who" and "Where" received lower total scores on average. The data provides an overview of participant responses to different types of questions in a survey.
This document provides details of a project to analyze residual stresses in welded plates. It includes the names of project members, objectives to calculate deformations from residual stresses using the contour method and validate with finite element modeling. It describes the materials selected, cutting samples with EDM, measuring deformations with CMM, determining deformations using MATLAB, and predicting residual stresses with finite element analysis by inputting deformations. References related to residual stress measurement in welds are also provided.
The document provides specifications for aluminum cable clamps used for steel cable. It lists the material as aluminum and notes the standard as EN 13411-3 formerly DIN 3093 A. Dimensions, weights, and other technical details are provided for clamps of various diameters from 1mm to 60mm in a table.
This document provides specifications for universal switch sticks, including dimensions, weights, and component details. Universal switch sticks come in one, two, and three section models with diameters of 1.25 inches or 1.5 inches. They range in length from 4 to 20 feet. The one-piece sticks have a universal head, while the multi-section sticks have matching diameters on the top and bottom sections.
This document provides dimensional standards for butt welding pipe fittings according to ANSI B-16.9, B-16.28, and MS SS P43 standards. It includes specifications for 90 degree elbows and 180 degree return bends in short radius configurations for various nominal pipe sizes from 1/2 inch to 36 inches. Charts list dimensions for outside diameter, center to face, back to face, center to center, and other measurements required to construct the pipe fittings.
This document contains tables of thermodynamic property data for steam in SI units. It includes saturation temperature, saturation pressure, superheated vapor, and compressed liquid tables. The tables provide properties such as specific volume, enthalpy, entropy, and others over a range of temperatures and pressures. The document was prepared for an engineering course at Michigan State University and includes contact information for the professor.
This document contains coordinate data for multiple vertices that make up structures labeled as Faja 4 and Faja 5. The coordinates are in UTM-WGS 84 projection and range from eastings of 392400 to 392800 and northings of 8553000 to 8553400. The structures appear to be linear and made up of connected vertices separated by distances ranging from around 2 to 17 meters.
The document lists American Wire Gauge (AWG) wire sizes from 36 to 2000 in both imperial and metric units, providing the wire diameter, cross-sectional area, and standard size for each listing. Wire sizes range from 0.0050 inches to 2 inches in diameter, and include common wire gauges for solid copper conductors used in electrical work.
The document discusses various operations involving decimals such as addition, subtraction, conversion between fractions and decimals. It also covers conversion between different units of length and capacity like centimeters to meters, liters to kiloliters, and kilograms to grams. Examples are provided to demonstrate converting between decimal and fraction representations of numbers.
This document contains coordinate point data consisting of an ID number, x-coordinate, y-coordinate, and z-coordinate for each point. There are over 7100 points listed, with IDs ranging from 1001 to 7106. The points seem to represent geographic features or structures labeled with terms like CASA, TERR, EST, and others.
1. The tables provide upper limits for the F distribution at 10% and 5% probability levels.
2. The limits are given for different combinations of degrees of freedom for the numerator (V1) and denominator (V2).
3. Higher values of V1 and V2 result in smaller upper limits for the F distribution.
This trigonometric table provides the values of sin, cos, tan, csc, sec, and cot for common angles from 0 to 360 degrees in increments of 15 degrees. It also provides the corresponding radian values. The table follows consistent patterns for the trigonometric functions across the angles.
This document contains a series of numbers with varying decimals. It does not provide any context or explanation for the meaning or purpose of the numbers. The high-level information that can be summarized is simply that the document contains numerical data without any accompanying description.
This document provides conversion factors between various units used to measure length, area, volume, mass, density, pressure, power, energy, specific energy, and heat capacity. Some key conversions include:
- 1 meter (m) = 3.28084 feet
- 1 square meter (m2) = 10.7639 square feet
- 1 cubic meter (m3) = 35.314 cubic feet
- 1 kilogram (kg) = 2.20462 pounds
- 1 pascal (Pa) = 0.000145038 pounds per square inch
The document contains monthly sales data from 1993 to 2007 for closed home sales, total sales volume, average home price, and average days on market. Some key trends highlighted in the data include:
- Closed home sales declined 7.63% from 2007 to 2008 but had generally increased each year from 1993 to 2006.
- Total sales volume peaked in 2006 but declined 1.49% in 2007 and 7.53% in 2008.
- The average home price increased over 71% from 2001 to 2007, with continuous annual growth over that period.
- The absorption rate, measuring the speed of home sales, fluctuated monthly but generally declined from the early 2000s figures.
The document appears to contain numeric data in a table with 7 rows and 8 columns. The columns include percentages of small, medium, and large vehicles; distance; carbon dioxide emissions for cars in each category; and total emissions. Row 2 shows the highest percentages of vehicles at 220, 210, and 129 and the highest total CO2 emissions at 308,843.17 kg. Row 5 and 6 are identical with the highest distance at 260 km and the same total CO2 emissions of 921,650.11 kg.
The document contains field notes from a leveling and tachometric surveying exercise. It includes:
- Leveling readings taken along a route to determine reduced levels at stations.
- Tachometric staff readings taken from an instrument set up to survey cross sections of a bridge and sections upstream and downstream.
- Horizontal distances, vertical distances, and reduced levels were recorded at points along the cross sections.
The document contains a code that should be copied into two text files named AccionesBonosUSA.txt. The code provides daily stock price and other financial data for various US companies and indices from 1987 to 1987. It lists dates, company ticker symbols, and corresponding price values.
The document provides critical values of the Studentized Range Distribution for various numbers of means and degrees of freedom at the 0.05 significance level. It includes a table with critical values ranging from 2 to 37 degrees of freedom and 2 to 20 means. The table gives the critical values needed to determine whether differences between multiple means are statistically significant.
The document is a z-score table that lists z-scores from -3.4 to 3.3 across the top and probability values from 0.00 to 0.09 down the left side. The table provides the area under the normal curve for each corresponding z-score and probability value.
The Science and Practice of Cartographic Interactionreroth
The document contains survey results from participants responding to questions in different categories. It includes a table with the sum and average scores for each question category (e.g. EMG, ENV, EPI) and total scores. Some categories like "How" received the highest total scores, while categories like "Who" and "Where" received lower total scores on average. The data provides an overview of participant responses to different types of questions in a survey.
This document provides details of a project to analyze residual stresses in welded plates. It includes the names of project members, objectives to calculate deformations from residual stresses using the contour method and validate with finite element modeling. It describes the materials selected, cutting samples with EDM, measuring deformations with CMM, determining deformations using MATLAB, and predicting residual stresses with finite element analysis by inputting deformations. References related to residual stress measurement in welds are also provided.
The document provides specifications for aluminum cable clamps used for steel cable. It lists the material as aluminum and notes the standard as EN 13411-3 formerly DIN 3093 A. Dimensions, weights, and other technical details are provided for clamps of various diameters from 1mm to 60mm in a table.
This document provides specifications for universal switch sticks, including dimensions, weights, and component details. Universal switch sticks come in one, two, and three section models with diameters of 1.25 inches or 1.5 inches. They range in length from 4 to 20 feet. The one-piece sticks have a universal head, while the multi-section sticks have matching diameters on the top and bottom sections.
This document provides dimensional standards for butt welding pipe fittings according to ANSI B-16.9, B-16.28, and MS SS P43 standards. It includes specifications for 90 degree elbows and 180 degree return bends in short radius configurations for various nominal pipe sizes from 1/2 inch to 36 inches. Charts list dimensions for outside diameter, center to face, back to face, center to center, and other measurements required to construct the pipe fittings.
This document contains tables of thermodynamic property data for steam in SI units. It includes saturation temperature, saturation pressure, superheated vapor, and compressed liquid tables. The tables provide properties such as specific volume, enthalpy, entropy, and others over a range of temperatures and pressures. The document was prepared for an engineering course at Michigan State University and includes contact information for the professor.
This document contains coordinate data for multiple vertices that make up structures labeled as Faja 4 and Faja 5. The coordinates are in UTM-WGS 84 projection and range from eastings of 392400 to 392800 and northings of 8553000 to 8553400. The structures appear to be linear and made up of connected vertices separated by distances ranging from around 2 to 17 meters.
The document lists American Wire Gauge (AWG) wire sizes from 36 to 2000 in both imperial and metric units, providing the wire diameter, cross-sectional area, and standard size for each listing. Wire sizes range from 0.0050 inches to 2 inches in diameter, and include common wire gauges for solid copper conductors used in electrical work.
The document discusses various operations involving decimals such as addition, subtraction, conversion between fractions and decimals. It also covers conversion between different units of length and capacity like centimeters to meters, liters to kiloliters, and kilograms to grams. Examples are provided to demonstrate converting between decimal and fraction representations of numbers.
This document contains coordinate point data consisting of an ID number, x-coordinate, y-coordinate, and z-coordinate for each point. There are over 7100 points listed, with IDs ranging from 1001 to 7106. The points seem to represent geographic features or structures labeled with terms like CASA, TERR, EST, and others.
1. The tables provide upper limits for the F distribution at 10% and 5% probability levels.
2. The limits are given for different combinations of degrees of freedom for the numerator (V1) and denominator (V2).
3. Higher values of V1 and V2 result in smaller upper limits for the F distribution.
This document contains tables of critical values for various statistical tests including the z-distribution, t-distribution, chi-square distribution, and F-distribution. The z-distribution table lists critical values for the z-test across different levels of significance. Similarly, the other tables provide critical values for t-tests, chi-square tests, ANOVA, and other statistical analyses across different degrees of freedom and significance levels.
The document contains two tables (A and B) related to probability and statistics. Table A provides the standard normal distribution probabilities for different z-values. Table B lists the critical values of the Student's t-distribution for various probabilities and degrees of freedom. The t-table provides the t-value required to obtain a given probability for the corresponding degrees of freedom.
The document contains two tables (A and B) related to probability and statistics. Table A provides the standard normal distribution probabilities for different z-values. Table B lists the critical values of the Student's t-distribution for various probabilities and degrees of freedom. The t-table provides the t-value required to obtain a given probability for the corresponding degrees of freedom.
This document contains two tables providing present value and future value factors for interest rates ranging from 1% to 30% per year over time periods from 1 to 30 years. Table 1 gives the present value of $1 to be received in the future, showing that the further in the future a payment is to be received, the lower its present value. Table 2 gives the future value of $1 invested now, showing that the longer a sum is invested, the higher its future value will be. For example, at a 10% interest rate, the present value of $1 received in 5 years is $0.621, while the future value of $1 invested for 5 years is $1.611.
The document contains a table with values for the Student's t-distribution. The table lists degrees of freedom (df) from 1 to 1000 across the top and significance levels (α) down the left side. It provides the critical t-values where the observed t-statistic must lie to be considered statistically significant for various confidence levels and degrees of freedom.
The document contains tables of orifice meter factors for natural gas measurement. There are tables for basic orifice factors, Reynolds number factors, and expansion factors for both flange taps and pipe taps on orifice plates of varying diameters from 0.25 to 6 inches in pipe sizes from 1.689 to 16 inches. The tables provide adjustment factors to calculate gas flow rates based on orifice plate characteristics and flow conditions.
This table provides critical values (tα/ν) of the Student's t-distribution for various confidence levels (α) with degrees of freedom (ν) ranging from 1 to infinity. The t-distribution is used to test hypotheses about the mean of a population when the population standard deviation is unknown. The table allows researchers to determine if a calculated t-statistic is greater than the critical value and thus determine if the null hypothesis can be rejected for a given confidence level and degrees of freedom.
This document contains a table of critical values for the t-distribution for various confidence levels and degrees of freedom. The table provides the t-value that corresponds to the given confidence level (probability) for each number of degrees of freedom from 1 to 1000.
The document contains two tables providing future value interest factors for one dollar and one dollar annuities compounded at various interest rates over different periods of time. Table A-1 shows the future value of $1 invested at rates from 1% to 30% over periods from 1 to 30 years. Table A-2 shows the future value of a $1 annuity invested at the same rates and periods. The tables allow users to determine the future values of single investments and annuities based on the interest rate and time period.
The document contains two tables providing future value interest factors for present values compounded over time at given interest rates. Table A-1 gives the future value of $1 invested for a given number of periods at rates from 1% to 30%. Table A-2 gives the future value of a $1 annuity invested over the same periods and rates. Both tables allow users to determine the future value of investments based on the interest rate and length of time compounded.
The document contains two tables providing future value interest factors for one dollar and one dollar annuities compounded at various interest rates over different periods of time. Table A-1 shows the future value of $1 invested at rates from 1% to 30% over periods from 1 to 30 years. Table A-2 shows the future value of a $1 annuity invested at the same rates and periods. The tables allow users to determine the future values of single investments and annuities based on the interest rate and time horizon.
The document contains two tables providing future value interest factors for present values compounded over time at given interest rates. Table A-1 gives the future value of $1 invested for a given number of periods at rates from 1% to 30%. Table A-2 gives the future value of a $1 annuity invested over the same periods and rates. The tables allow users to calculate future or present values of investments compounded at different rates over different lengths of time.
This table provides critical values for the t-distribution for various confidence levels and degrees of freedom. The t-distribution is used to test hypotheses about population means when the population standard deviation is unknown. The critical values indicate the value of the t-statistic needed to reject the null hypothesis for a given confidence level and degrees of freedom.
Tablas normal chi cuadrado y t student 1-semana 6Karla Diaz
The document contains a table of values for the standard normal cumulative distribution function F(z) for z-values ranging from -3.5 to 3.2 in increments of 0.1. The table provides the probability P(Z≤z) for finding a value less than or equal to z in a standard normal distribution.
This document provides details of a financial operation, including a 5.5% annual effective interest rate (TEA) and 0.45% monthly effective rate (TEM). It includes a table showing the amortization schedule over 120 months for a 350,000 loan, including the monthly payment amount, interest paid, principal paid, and outstanding balance. The total interest paid over the life of the loan is 94,688.22 and the total amount paid is 455,100.72.
This document contains a weight chart for hexagon bolts and nuts in various sizes from Dinstock Ltd, a fastener supplier based in the UK. It lists the nominal diameter in millimeters and weights in kilograms for bolt and nut sizes from M12 to M39 over lengths ranging from 60 to 800 millimeters. The chart provides information on the standard weights for common metric bolt and nut sizes.
This document contains tables presenting discount factors and future values for interest rates ranging from 1% to 30% per year over time periods from 1 to 30 years. Table 1 shows the present value of $1 received in the future, declining with longer time periods and higher interest rates. Table 2 shows the future value of $1, increasing with longer time periods and higher interest rates. The tables can be used to calculate the present or future value of a cash flow given an interest rate and number of time periods.
Similar to Tabla para determinar los valores de yn y k (20)
Sri Guru Hargobind Ji - Bandi Chor Guru.pdfBalvir Singh
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
Online train ticket booking system project.pdfKamal Acharya
Rail transport is one of the important modes of transport in India. Now a days we
see that there are railways that are present for the long as well as short distance
travelling which makes the life of the people easier. When compared to other
means of transport, a railway is the cheapest means of transport. The maintenance
of the railway database also plays a major role in the smooth running of this
system. The Online Train Ticket Management System will help in reserving the
tickets of the railways to travel from a particular source to the destination.
Sachpazis_Consolidation Settlement Calculation Program-The Python Code and th...Dr.Costas Sachpazis
Consolidation Settlement Calculation Program-The Python Code
By Professor Dr. Costas Sachpazis, Civil Engineer & Geologist
This program calculates the consolidation settlement for a foundation based on soil layer properties and foundation data. It allows users to input multiple soil layers and foundation characteristics to determine the total settlement.
This is an overview of my current metallic design and engineering knowledge base built up over my professional career and two MSc degrees : - MSc in Advanced Manufacturing Technology University of Portsmouth graduated 1st May 1998, and MSc in Aircraft Engineering Cranfield University graduated 8th June 2007.
This study Examines the Effectiveness of Talent Procurement through the Imple...DharmaBanothu
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
Covid Management System Project Report.pdfKamal Acharya
CoVID-19 sprang up in Wuhan China in November 2019 and was declared a pandemic by the in January 2020 World Health Organization (WHO). Like the Spanish flu of 1918 that claimed millions of lives, the COVID-19 has caused the demise of thousands with China, Italy, Spain, USA and India having the highest statistics on infection and mortality rates. Regardless of existing sophisticated technologies and medical science, the spread has continued to surge high. With this COVID-19 Management System, organizations can respond virtually to the COVID-19 pandemic and protect, educate and care for citizens in the community in a quick and effective manner. This comprehensive solution not only helps in containing the virus but also proactively empowers both citizens and care providers to minimize the spread of the virus through targeted strategies and education.
雅虎竞拍
煤炉代买
paypay商城
乐天二手
日本亚马逊
乐天新品
ZOZOTOWN
