Study on modern Blow room line

Prepared By : Mazadul Hasan
sheshir
ID: 2010000400008
13th Batch
Wet Processing Technology
Email:
mazadulhasan@yahoo.com
Southeast University

Southeast University

Department Of Textile Engineering
I/A 251,252 Tejgaon Dhaka Bangladesh



A product of substantial length & relatively small
cross-section consisting of fibres or filaments
with or without twist for produce fabric. By the
technology of manufacturing yarn is known Yarn
Manufacturing Technology.



In the technology there are some partBlow room
Carding
Drawing
Simplex
Ring-spinning
Winding

1.
2.

3.
4.
5.
6.
7.
8.
9.
10.

Bale Breaker
Mono Cylinder
Dual Cylinder
Dedusting unit1
Step Cleaner
Porcupine Opener1
Dedusting unit2
Porcupine Opener2
Dedusting unit 3
Scutcher
Reference : New Meghna Textile Mills Ltd.

A British textile machinery Company.


Crosrol has introduced a completely new range of cotton blowroom

the simplest solution to bale opening;

capable of processing up to 4 different
material assortments simultaneously.
Cutting head widths of 1.7M & 2.3M
together with un-restricted track lengths
enable uses to lay down as many as 200 bales
on each side.
production rates of up to 1500Kg per hour





Designed to take advantage of the
exceptionally efficient Bale-opening of the
Crosrol ABO the Crosrol Pre-Cleaner (CPC)
through its unique “single sheet” material
processing technique gives not only
exceptional Cleaning but also maximum fibre
yield with minimal Nep generation when
compared to other first stage cleaners
currently available.
With multi-blend processing capabilities
together with a production rate of up to
2000Kg per hour multiple opening lines can
be fed from a single unit.





The Crosrol range of Opening
Blenders with Four & Six
chambers.
Blending power in comparison
with conventional serial-fill
blenders.

the Crosrol Fine cleaner significantly reduces
the negative side effects familiar with multiroll intensive cleaners
This together with a wide range of both
Pinned
very high production rates up to 750Kg’s per
hour.

Unique principle for the removal of Micro
dust and Nep from the Cotton fibre
Rotating disc transfers the fibres through
Negative & positive pressure quadrants.
Minimal moving parts ensure simple
operating with ultimate reliability.
Insensitivity to pressure differentials negate
the need for additional pressure controlling
fans thus significantly reducing power
consumption.

Halifax during the past 40 years. Original spare parts manufacturing
is undertaken at Crosrol UK’s modern machine facilities in
Bradford.The complete range of parts is available for all the
machines
 A range of performance packs designed to improve the productivity
of existing Crosrol cards and blowroom installations.
 Mechanical parts include:
Aluminium plates
Crosrol underscreens
Flats (stationary and revolving)
Pinned rollers
All mechanical parts, belts, gears, coilers and reduction gearboxes.
Card wire
Filters and fans
Electrical components


Study on modern Blow room line

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (10)

Similar to Study on modern Blow room line

Similar to Study on modern Blow room line (20)

More from Md. Mazadul Hasan Shishir

More from Md. Mazadul Hasan Shishir (20)

Recently uploaded

Recently uploaded (20)

Study on modern Blow room line