This document provides an overview of the Transportation Engineering II course syllabus and discusses various topics that will be covered, including railway geometric design, station and yard design, airport engineering, and harbor and dock engineering. It also summarizes key concepts related to permanent way design, including subgrade, formation, embankment, track drainage, rails, rail fastenings, sleepers, and ballast. Modern trends in rail such as MAGLEV, tube, and metro rail systems are also introduced.
Sleepers, also called ties, are transverse members laid beneath rails to distribute load from trains to the track bed. They come in various materials including wood, steel, concrete, and plastic. Wooden sleepers are most common but have short lifespans while concrete and steel last longer. All sleepers must firmly support rails, maintain proper gauge, and evenly distribute heavy train loads over a wide area of ballast for track stability.
Permanent Way of Railway & Components ?(part -1,2,3,4,5)RAMPRASAD KUMAWAT
Permanent Way Components: , Selection of Alignment, Ideal Permanent Ways and Cross-sections in different conditions, Salient Features and types of Components viz.
Rails, Sleepers, Ballast, Rail Fastenings.
Types and Selection of Gauges
Sleepers are transverse members that support the rails and transfer loads from the rails to the ballast and subgrade. The main types of sleepers discussed are timber, cast iron, steel, and concrete. Sleepers must meet requirements like being economical, easy to maintain, and able to withstand shocks and vibrations. Ballast is layered beneath and around sleepers to distribute loads, provide drainage and stability. Common ballast materials are broken stone, sand, slag, and moorum. Tractive resistances oppose train movement and include train resistance, track profile resistance, starting/acceleration resistance, and wind resistance.
The branch of Civil Engineering which deals with the design, construction and maintenance of the railway tracks for safe and efficient movements of trains is called Railway Engineering
BALLAST
RAILS
SLEEPERS
POINTS OF CROSSINGS
POINTS OF SWITCH
The rolled steel sections laid
end to end in two parallel lines
over sleepers to form a railway
track are known as RAILS The rails used in the construction of railway track can be divided into the following three types :
(1) Double Headed Rails (D.H. Rail)
(2) Flat Footed Rails (F.F. Rail)
(3) Bull Headed Rails (B.H. Rail)
Railway Engineering - Geometric design of trackMani Vel
This document discusses the importance of proper geometric design of railway tracks. It outlines key considerations for geometric design including gradients, curvature, and track alignment. Proper design is needed to ensure safe train operation at maximum speeds and loads. Specific geometric design elements are described, such as ruling gradients, helper gradients, momentum gradients, and standards for station yard gradients. Grade compensation is also outlined, where steeper gradients are allowed on curved tracks compared to straight tracks.
Sleepers, also called ties, are transverse members laid beneath rails to distribute load from trains to the track bed. They come in various materials including wood, steel, concrete, and plastic. Wooden sleepers are most common but have short lifespans while concrete and steel last longer. All sleepers must firmly support rails, maintain proper gauge, and evenly distribute heavy train loads over a wide area of ballast for track stability.
Permanent Way of Railway & Components ?(part -1,2,3,4,5)RAMPRASAD KUMAWAT
Permanent Way Components: , Selection of Alignment, Ideal Permanent Ways and Cross-sections in different conditions, Salient Features and types of Components viz.
Rails, Sleepers, Ballast, Rail Fastenings.
Types and Selection of Gauges
Sleepers are transverse members that support the rails and transfer loads from the rails to the ballast and subgrade. The main types of sleepers discussed are timber, cast iron, steel, and concrete. Sleepers must meet requirements like being economical, easy to maintain, and able to withstand shocks and vibrations. Ballast is layered beneath and around sleepers to distribute loads, provide drainage and stability. Common ballast materials are broken stone, sand, slag, and moorum. Tractive resistances oppose train movement and include train resistance, track profile resistance, starting/acceleration resistance, and wind resistance.
The branch of Civil Engineering which deals with the design, construction and maintenance of the railway tracks for safe and efficient movements of trains is called Railway Engineering
BALLAST
RAILS
SLEEPERS
POINTS OF CROSSINGS
POINTS OF SWITCH
The rolled steel sections laid
end to end in two parallel lines
over sleepers to form a railway
track are known as RAILS The rails used in the construction of railway track can be divided into the following three types :
(1) Double Headed Rails (D.H. Rail)
(2) Flat Footed Rails (F.F. Rail)
(3) Bull Headed Rails (B.H. Rail)
Railway Engineering - Geometric design of trackMani Vel
This document discusses the importance of proper geometric design of railway tracks. It outlines key considerations for geometric design including gradients, curvature, and track alignment. Proper design is needed to ensure safe train operation at maximum speeds and loads. Specific geometric design elements are described, such as ruling gradients, helper gradients, momentum gradients, and standards for station yard gradients. Grade compensation is also outlined, where steeper gradients are allowed on curved tracks compared to straight tracks.
The document discusses reasons for laying new railway lines and the process of railway surveys. It outlines six main reasons for proposing new railway lines: 1) strategic connections, 2) linking trade centers, 3) connecting ports to inland areas, 4) shortening existing routes, 5) laying branch lines, and 6) developing undeveloped areas. It then describes the three main types of railway surveys - reconnaissance, preliminary, and location surveys - conducted to determine the optimal route. The reconnaissance survey gathers initial data, preliminary survey evaluates alternative routes, and location survey establishes the final track centerline.
The document discusses the construction and maintenance of railway tracks. It covers the need for constructing new railway lines, the process of construction including earth work, plate laying, and ballast laying. It also discusses track drainage systems, including surface drainage with side drains and sub-surface drainage. Maintenance of tracks is important and includes daily and periodic maintenance to replace components and ensure safety. Regular maintenance extends the life of tracks and rolling stock.
Railway tracks require stable earthworks to support the ballast, sleepers, and rails. There are several components involved in railway track formation including the subgrade, ballast, and drainage systems. Formations can be constructed as embankments raised above the existing ground level or cuttings made by excavating below ground level. The minimum recommended widths for formations depend on the track gauge and number of lines. Proper slopes and drainage are also important to maintain stability. Various methods like using layers of moorum or rubble, cement grouting, sand piles, or chemical treatments can help stabilize formations built on poor soils.
The document discusses railway track gauges in India. It begins by defining gauge as the distance between rails and notes the three primary gauges used in India: broad gauge, meter gauge, and narrow gauge. Broad gauge is the standard at 1676 mm. Efforts are being made to convert other lines to broad gauge when funds allow due to its benefits. Factors like cost, traffic capacity, terrain, and ensuring uniformity across networks influence gauge choice. The document outlines problems caused by multiple gauges and India's policy to adopt broad gauge uniformly to eliminate issues and improve efficiency.
Chapter 1 introductution to railway and permanent waydhara dattani
This document provides an introduction to railway track gauges and permanent way components. It discusses different track gauges used in India and around the world, and factors that influence gauge selection such as construction costs, traffic volume, and terrain. It also describes various types of rails, fittings used to join rails together and attach them to sleepers like fish plates, spikes, bolts and chairs. Other components discussed include bearings plates, blocks and sleepers. The document aims to give an overview of permanent way construction and components.
Geometric design of tracks aims to provide smooth and safe running of trains at maximum speed while carrying heavy loads. This involves proper design of gradients, curvature, and super elevation (cant).
There are different types of gradients - ruling gradient which is the maximum gradient permitted, momentum gradient which is steeper and uses train momentum, and pusher gradient requiring extra locomotives. Gradients are designed considering train performance and load. Curvature introduces greater resistance requiring grade compensation of ruling gradients.
Super elevation (cant) involves raising the outer rail on curves to counteract centrifugal forces. Equilibrium cant provides equal wheel load distribution. Higher speeds result in cant deficiency which must be limited for passenger safety. Contrary flexures like
This document provides an overview of transportation engineering and different modes of transportation. It discusses highways, railways, airways, and waterways in detail. For highways, it covers their historical development in India including key committees and acts that helped develop the road network like the Jayakar Committee, Central Road Fund, and Motor Vehicles Act. It also discusses classification of highways in India based on various factors.
This document discusses coning of wheels and rail creep in railways. It contains the following key points:
1. Coning of wheels refers to wheels being shaped like a cone to keep trains centered on straight tracks and allow different wheel distances on curved tracks, reducing wear.
2. Rail creep is the longitudinal movement of rails in the direction of train movement, ranging from 0-6 inches. It is caused by starting/stopping forces, wave motions, and temperature changes.
3. Creep can cause buckling, disturbed track alignment and gauging, and disrupted signaling if not corrected through pulling rails back or using creep anchors to grip rails in place.
The document discusses factors that affect the alignment of railway lines, including horizontal and vertical alignment. It describes the importance of proper alignment for reasons of cost, difficulty of changing alignment later, and fulfilling objectives. An ideal alignment considers purpose, integrated development, and economic factors like shortest route, construction/maintenance costs, operational expenses, safety, comfort, and aesthetics. Selection of alignment is based on gauge, obligatory points, topography, geometrical standards, geology, road crossings, labour/materials, station/yard placement, and political considerations.
The clear distance ahead of vehicle which is visible to the driver is known as sight distance
The minimum distance within which a driver can safely stop his vehicle without any collision with some vehicle, animal or any other object is known as stopping sight distance.
This document provides an overview of highway engineering and transportation planning in India. It discusses the historical development of roads in India from ancient times to the present. It outlines several major committees and plans that have guided road development, including the Jayakar Committee (1927), Central Road Fund (1929), National Highway Act (1956), and the Nagpur, Bombay, and Lucknow Road Development Plans. It also covers classifications of roads, common road patterns used in planning, and the formulas and factors considered in the major road plans to determine the optimal lengths of national highways, state highways, and other road categories.
I'm Irfan Nasir. Currently studying Civil Engineering at Mehran University of Engineering and Technology. This is a slide made by me on Defects in rails from the subject Transportation Engineering.
Different Cross sections of Rail Tracks and Railway Station LayoutSunil Kumar Meena
This document provides information on railway track layouts and clearances. It includes cross sections of broad gauge tracks and distances between the track center line and platforms or structures. Minimum horizontal clearances and heights above and below the rail level are specified. Platform heights currently range from 500mm to 840mm. Stair riser heights on Indian railways should be between 4-7 inches. Diagrams illustrate a standard railway station layout and track line diagram.
Railway secondary part of the transportation . Railway use of maximum materials transport of one place to other place. Particular time of number of trains are move of particular junction so these part are used of points and crossing.
Best helpful of these ppt of railway track and design purposes.
This document provides an overview of railway engineering and the history of railways in Pakistan. It discusses key elements of the railway track including the formation, ballast, sleepers, and rails. The formation provides the foundation for the track. Ballast is placed around the sleepers to transmit loads to the formation. Sleepers are laid transversely to support the rails. Rails provide a continuous pathway to guide train wheels. Rail joints can be supported, suspended, or bridge joints and either square or staggered. Railways provide economical and safe land transport compared to other modes.
The document provides information on transportation engineering and railway engineering. It discusses the role of railways in transportation from economic, cultural, and political aspects. It then covers the history of railways in India from 1832 to present day. Key topics include gauges used in India, permanent way components like rails and fish plates, and manufacturing units.
Railway engineering By T.Ravi Prakash/Kongu Engineering Collegeravicivil
The document discusses rail transport in India. It provides an overview of:
1) The history of railways in India, beginning with the first line opened in 1853 between Mumbai and Thane.
2) The development of Indian Railways over successive five-year plans, with increasing focus on expansion, electrification, and modernization.
3) The organization of Indian Railways, divided into 16 zones administered by general managers and further divided into divisions run by divisional railway managers.
4) Key facts about Indian Railways, which operates over 67,000 route km and carries over 1.3 billion passengers and freight daily.
This document provides an overview of railway engineering in India. It discusses the history and development of railways in India, the roles and organization of Indian Railways, key terms related to railway infrastructure, the advantages and disadvantages of railways compared to other modes of transport, and some of the strengths and weaknesses of Indian Railways. The document is divided into multiple sections covering topics like permanent way, types of rails and sleepers, organization of Indian Railways, research and standards organization, and the roles and impacts of railways in India.
The document discusses reasons for laying new railway lines and the process of railway surveys. It outlines six main reasons for proposing new railway lines: 1) strategic connections, 2) linking trade centers, 3) connecting ports to inland areas, 4) shortening existing routes, 5) laying branch lines, and 6) developing undeveloped areas. It then describes the three main types of railway surveys - reconnaissance, preliminary, and location surveys - conducted to determine the optimal route. The reconnaissance survey gathers initial data, preliminary survey evaluates alternative routes, and location survey establishes the final track centerline.
The document discusses the construction and maintenance of railway tracks. It covers the need for constructing new railway lines, the process of construction including earth work, plate laying, and ballast laying. It also discusses track drainage systems, including surface drainage with side drains and sub-surface drainage. Maintenance of tracks is important and includes daily and periodic maintenance to replace components and ensure safety. Regular maintenance extends the life of tracks and rolling stock.
Railway tracks require stable earthworks to support the ballast, sleepers, and rails. There are several components involved in railway track formation including the subgrade, ballast, and drainage systems. Formations can be constructed as embankments raised above the existing ground level or cuttings made by excavating below ground level. The minimum recommended widths for formations depend on the track gauge and number of lines. Proper slopes and drainage are also important to maintain stability. Various methods like using layers of moorum or rubble, cement grouting, sand piles, or chemical treatments can help stabilize formations built on poor soils.
The document discusses railway track gauges in India. It begins by defining gauge as the distance between rails and notes the three primary gauges used in India: broad gauge, meter gauge, and narrow gauge. Broad gauge is the standard at 1676 mm. Efforts are being made to convert other lines to broad gauge when funds allow due to its benefits. Factors like cost, traffic capacity, terrain, and ensuring uniformity across networks influence gauge choice. The document outlines problems caused by multiple gauges and India's policy to adopt broad gauge uniformly to eliminate issues and improve efficiency.
Chapter 1 introductution to railway and permanent waydhara dattani
This document provides an introduction to railway track gauges and permanent way components. It discusses different track gauges used in India and around the world, and factors that influence gauge selection such as construction costs, traffic volume, and terrain. It also describes various types of rails, fittings used to join rails together and attach them to sleepers like fish plates, spikes, bolts and chairs. Other components discussed include bearings plates, blocks and sleepers. The document aims to give an overview of permanent way construction and components.
Geometric design of tracks aims to provide smooth and safe running of trains at maximum speed while carrying heavy loads. This involves proper design of gradients, curvature, and super elevation (cant).
There are different types of gradients - ruling gradient which is the maximum gradient permitted, momentum gradient which is steeper and uses train momentum, and pusher gradient requiring extra locomotives. Gradients are designed considering train performance and load. Curvature introduces greater resistance requiring grade compensation of ruling gradients.
Super elevation (cant) involves raising the outer rail on curves to counteract centrifugal forces. Equilibrium cant provides equal wheel load distribution. Higher speeds result in cant deficiency which must be limited for passenger safety. Contrary flexures like
This document provides an overview of transportation engineering and different modes of transportation. It discusses highways, railways, airways, and waterways in detail. For highways, it covers their historical development in India including key committees and acts that helped develop the road network like the Jayakar Committee, Central Road Fund, and Motor Vehicles Act. It also discusses classification of highways in India based on various factors.
This document discusses coning of wheels and rail creep in railways. It contains the following key points:
1. Coning of wheels refers to wheels being shaped like a cone to keep trains centered on straight tracks and allow different wheel distances on curved tracks, reducing wear.
2. Rail creep is the longitudinal movement of rails in the direction of train movement, ranging from 0-6 inches. It is caused by starting/stopping forces, wave motions, and temperature changes.
3. Creep can cause buckling, disturbed track alignment and gauging, and disrupted signaling if not corrected through pulling rails back or using creep anchors to grip rails in place.
The document discusses factors that affect the alignment of railway lines, including horizontal and vertical alignment. It describes the importance of proper alignment for reasons of cost, difficulty of changing alignment later, and fulfilling objectives. An ideal alignment considers purpose, integrated development, and economic factors like shortest route, construction/maintenance costs, operational expenses, safety, comfort, and aesthetics. Selection of alignment is based on gauge, obligatory points, topography, geometrical standards, geology, road crossings, labour/materials, station/yard placement, and political considerations.
The clear distance ahead of vehicle which is visible to the driver is known as sight distance
The minimum distance within which a driver can safely stop his vehicle without any collision with some vehicle, animal or any other object is known as stopping sight distance.
This document provides an overview of highway engineering and transportation planning in India. It discusses the historical development of roads in India from ancient times to the present. It outlines several major committees and plans that have guided road development, including the Jayakar Committee (1927), Central Road Fund (1929), National Highway Act (1956), and the Nagpur, Bombay, and Lucknow Road Development Plans. It also covers classifications of roads, common road patterns used in planning, and the formulas and factors considered in the major road plans to determine the optimal lengths of national highways, state highways, and other road categories.
I'm Irfan Nasir. Currently studying Civil Engineering at Mehran University of Engineering and Technology. This is a slide made by me on Defects in rails from the subject Transportation Engineering.
Different Cross sections of Rail Tracks and Railway Station LayoutSunil Kumar Meena
This document provides information on railway track layouts and clearances. It includes cross sections of broad gauge tracks and distances between the track center line and platforms or structures. Minimum horizontal clearances and heights above and below the rail level are specified. Platform heights currently range from 500mm to 840mm. Stair riser heights on Indian railways should be between 4-7 inches. Diagrams illustrate a standard railway station layout and track line diagram.
Railway secondary part of the transportation . Railway use of maximum materials transport of one place to other place. Particular time of number of trains are move of particular junction so these part are used of points and crossing.
Best helpful of these ppt of railway track and design purposes.
This document provides an overview of railway engineering and the history of railways in Pakistan. It discusses key elements of the railway track including the formation, ballast, sleepers, and rails. The formation provides the foundation for the track. Ballast is placed around the sleepers to transmit loads to the formation. Sleepers are laid transversely to support the rails. Rails provide a continuous pathway to guide train wheels. Rail joints can be supported, suspended, or bridge joints and either square or staggered. Railways provide economical and safe land transport compared to other modes.
The document provides information on transportation engineering and railway engineering. It discusses the role of railways in transportation from economic, cultural, and political aspects. It then covers the history of railways in India from 1832 to present day. Key topics include gauges used in India, permanent way components like rails and fish plates, and manufacturing units.
Railway engineering By T.Ravi Prakash/Kongu Engineering Collegeravicivil
The document discusses rail transport in India. It provides an overview of:
1) The history of railways in India, beginning with the first line opened in 1853 between Mumbai and Thane.
2) The development of Indian Railways over successive five-year plans, with increasing focus on expansion, electrification, and modernization.
3) The organization of Indian Railways, divided into 16 zones administered by general managers and further divided into divisions run by divisional railway managers.
4) Key facts about Indian Railways, which operates over 67,000 route km and carries over 1.3 billion passengers and freight daily.
This document provides an overview of railway engineering in India. It discusses the history and development of railways in India, the roles and organization of Indian Railways, key terms related to railway infrastructure, the advantages and disadvantages of railways compared to other modes of transport, and some of the strengths and weaknesses of Indian Railways. The document is divided into multiple sections covering topics like permanent way, types of rails and sleepers, organization of Indian Railways, research and standards organization, and the roles and impacts of railways in India.
This document provides an introduction to railway engineering. It discusses different modes of transportation including railways. Railways have advantages for long distance transportation of bulk goods and passengers. The history of rail transport in India is discussed, including the establishment of the first lines in the 1850s. Indian railways are classified based on route importance and traffic volume into trunk routes, main lines, and branch lines. Modern trends in railways include high speed trains like MAGLEV trains, underground tube railways, and urban metro systems. Key railway engineering terms are defined like locomotives, tracks, rails, gauges, and sleepers.
This document provides information on transportation engineering and highway development and planning in India. It discusses the different modes of transportation including land, water, and air transportation. It describes the classification and characteristics of various types of highways in India including national highways, state highways, major district roads, and village roads. It also discusses the historical development of road construction in India including important committees, plans, and acts that helped develop the road network over time. Finally, it covers topics like highway alignment and the various surveys involved in highway planning and development.
REPUBLICA
KATHMANDU, March 8: The government has completed final preparation to establish the Department of Railway (DoR) with the vision of developing 4000 km railway line across the country within 20 years.
The Ministry of Physical Planning and Works (MoPPW), which will oversee the DoR upon its formation, recently finalized the Organization and Management (O&M) survey and sent it to the Ministry of General Administration (MoGA) to forward it to the cabinet for approval.
The government decided to form the DoR to speed up the process of constructing different railway project across the country.
Ram Kumar Lamsal, who was involved in preparing O&M survey, said the DoR would have a total of 35 staffers, including three joint-secretaries, seven under-secretaries, 12 section officers and 13 non-gazetted officers. Annual budget for the department has been estimated at Rs 7.5 million.
"The Department of Railway will be formally established once the cabinet approves the O&M survey," said Lamsal, who is heading the Railway Project that is overseeing railway related works under stop-gap basis.
The Ministry of Finance has already given its consent to form the department. Upon formation, the department will oversee construction and management of railway, metro rail, ropeways and cable car lines in the country.
Lamsal, who is also a joint-secretary at MoPPW, said the department has set a vision of increasing railway line to 4,000 km, including the East-West Railway, Kathmandu-Pokhara Railway, Kathmandu-Tibet Railway and railway lines that connect major bordering towns of India and Nepal, within 20 years.
"We have also set a target of building 150 km metro line in the Kathmandu Valley, extend existing ropeway to 1,500 km and establish at least 60 cable car lines within the period," Lamsal told Republica on Monday.
The to-be-formed department will also complete the Detailed Project Report (DPR) of Janakpur-Bardibas railway line and bring the Nepal Railways Company under the purview of the MoPPW. Existing acts specify the Ministry of Labor and Transport Management as the authority to oversee works related to railway.
IRJET- Problem of Indian Railway Management SystemIRJET Journal
The document discusses problems with the Indian railway system. It notes that while the railway system has expanded significantly, infrastructure growth has not kept pace with increased traffic volumes, leading to major congestion issues. Freight rates are very high to subsidize low passenger fares, contributing to inflation. There is also a skewed traffic pattern with heavy volumes on a few major routes, severely impacting transit times on congested lines that share corridors for both passenger and freight trains. Overall, the growth of the railway network has not matched the rise in traffic, necessitating infrastructure improvements to resolve capacity constraints.
The document provides a detailed overview of the history and development of the Indian Railways system. Some key points:
- The first train service in India began in 1851 between Bombay and Thana, and rail networks were established and expanded under British rule.
- At independence in 1947, India had over 40 rail systems that were nationalized into one state-owned entity with 16 zones.
- Over time the railways were modernized with the phase out of steam locomotives in 1985, computerization of reservation systems in the late 1980s-1990s, and the opening of difficult routes like the Konkan Railway.
- The railways play a major role in transporting passengers and freight across the large
The document provides details about the development of railway transportation in Nepal. It discusses Nepal's first railway line that was established in 1927 and linked two cities. Future plans for expanding railway networks across Nepal and between Nepal and India are outlined, including various ongoing projects like the East-West Electric Railway and Kathmandu Metrorail Project. The railway is positioned as an important mode of transportation that can help develop Nepal's economy and connectivity both internally and with neighboring countries.
This document provides information about different modes of transportation, including roadways, waterways, railways, and airways. It focuses on describing roadways and railways in India. For roadways, it covers classifications of roads and varieties of vehicles. For railways, it discusses advantages and disadvantages, categories, types of locomotives, permanent way components, gauges, and types of rails, sleepers, and ballast.
CBSE Class X-Geo(7) : Lifelines of National Economy Chapter in an easy and simple way, for everyone to understand. For all students and who have have slow pace also.
this ppt seeks to introduce the viewer about the evolving trends in Indian Railways and how Indian railways has slowly started to emerge as a technologically advanced transporter .
This document discusses highway planning and alignment. It defines highway engineering as dealing with planning, designing, constructing and maintaining roads and bridges for effective transportation. It notes that highways improve economic activity through production, consumption and transportation, and have social impacts by connecting areas and affecting population distribution and safety. It then provides details on the history and types of roads in various countries and eras, classifications of highways, and institutions involved in highway planning and development in India.
Indian Railways - Lifeline of the NationDINESH GERA
Presentation covers the history of Indian Railways, SWOT analysis as well as the future of railways. Initiative of google to wifi enable 200 stations across country is phenomenal. Someone who want to understand the world's largest rail network in short time, it's a must read for them.
Transport is an important part of India's economy and tourism. Public transport remains the primary mode for most of the population. India has a variety of transport modes including rail, road, water, and air. The rail network is the 4th longest in the world. While motor vehicle ownership is low, traffic deaths are among the highest. Infrastructure requires further investment, though it has progressed since economic liberalization in the 1990s. Traditional transport includes walking, palanquins, carts, and rickshaws. Modern public transport encompasses buses, taxis, autos, and electric rickshaws. Urban rail includes metros and suburban rail in major cities. Waterways and aviation also contribute to India's transport network
This document provides information about transportation engineering and the historical development of roads. It discusses early footpaths and animal-drawn vehicles, and the development of Roman, French, British, and Indian road networks. It also covers classifications of highways, road patterns, the 4 Es of transportation, and urban road classification systems including arterial, sub-arterial, collector, local, and cul-de-sac streets.
Bangladesh Railway connects many districts across the country and plays an important role in mass transportation. It was established in 1862 and inherited the British-built Assam-Bengal railway system after partition. The network consists of broad, meter, and dual gauge tracks totaling around 2,700 km. Key issues include lack of funding, qualified staff, modernization, and government attention. Proposed improvements involve greater private sector involvement, increased budgets, commercialization, anti-corruption measures, and improved services.
This document provides an overview of transportation engineering and highway development and planning in India. It discusses the various modes of transportation including road, rail, air, and water. It then focuses on road transportation, describing the historical development of road construction from ancient Roman and Indian roads. It outlines India's classification system for highways and various road development plans over the decades, including the First 20-Year Road Plan from 1943-1963, Second 20-Year Road Plan from 1961-1981, and Third 20-Year Road Plan from 1981-2001. The document also discusses other important institutions and committees related to highway development in India.
This document provides a project brief for a proposed metro rail system in Chennai, India. It summarizes key details about Chennai's population, industries, land use, existing rail and road networks, and transportation problems. It then outlines the selection of 7 proposed metro corridors, including corridors 1 and 2 being selected for phase 1. Traffic forecasts predict over 10 million daily trips by 2026. The document also discusses the proposed metro system's selection of standard gauge track, ballastless track structure, 750V DC third rail traction system, and ATP signaling for train control and safety.
1) The document discusses appropriate track technology for mixed traffic of semi-high speed trains and heavy axle load trains on Indian Railways based on global experience.
2) It analyzes track standards for high speed trains, semi-high speed trains, and heavy axle load trains on various global rail networks.
3) Based on this analysis, the document recommends a track structure of UIC 60kg rails, pre-stressed concrete sleepers at 1660 sleepers per km, and elastic fastenings for mixed traffic on Indian Railways.
Indian Railways is over 150 years old and is the largest rail network in the world under one management. It plays a crucial role in India's economic development by transporting raw materials and goods across the country in a convenient and efficient manner. Recent initiatives by Indian Railways include increasing private participation through public-private partnerships and improving passenger amenities and sanitation. Freight transportation makes up 70% of Indian Railways' revenue and it carries a wide variety of goods using different types of freight trains.
Similar to Introduction to railway engineering (T.E 2) (20)
Impartiality as per ISO /IEC 17025:2017 StandardMuhammadJazib15
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...DharmaBanothu
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
This is an overview of my current metallic design and engineering knowledge base built up over my professional career and two MSc degrees : - MSc in Advanced Manufacturing Technology University of Portsmouth graduated 1st May 1998, and MSc in Aircraft Engineering Cranfield University graduated 8th June 2007.
Cricket management system ptoject report.pdfKamal Acharya
The aim of this project is to provide the complete information of the National and
International statistics. The information is available country wise and player wise. By
entering the data of eachmatch, we can get all type of reports instantly, which will be
useful to call back history of each player. Also the team performance in each match can
be obtained. We can get a report on number of matches, wins and lost.
Online train ticket booking system project.pdfKamal Acharya
Rail transport is one of the important modes of transport in India. Now a days we
see that there are railways that are present for the long as well as short distance
travelling which makes the life of the people easier. When compared to other
means of transport, a railway is the cheapest means of transport. The maintenance
of the railway database also plays a major role in the smooth running of this
system. The Online Train Ticket Management System will help in reserving the
tickets of the railways to travel from a particular source to the destination.
This study Examines the Effectiveness of Talent Procurement through the Imple...DharmaBanothu
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
2. Syllabus
• Introduction
• Railway Geometric
• Station and Yards
• Airport Engineering
• Harbours and Docks
Text Books: Railway Engineering by Saxena & Arora
Airport Engineering by Rangwala
Harbour, Docks and Tunnel Engineering by R.Srinivasan
3. Unit 1: Introduction
• Development and organization of Indian Railways. Modern
trends in railways: MAGLEV, TUBE, METRO. Permanent way:
Sub-grade, formation, embankment and cutting, track
drainage. Rails: Rail gauges, types of rails, defects in rails, rail
failure, creep of rail, Coning of Wheels, Tilting of Rails, Rail
Joints, Creep of Rails. Rail Fastenings: Fish plates, spikes,
chairs, keys, bearing plates. Sleepers : Timber, steel, cast iron,
concrete and prestressed concrete sleepers, manufacturing of
concrete sleepers, sleeper density, Adzing of Sleepers,.
Ballast: Ballast materials, size of ballast, screening of ballast,
specification of ballast, tests on ballast.
4. “Transportation is regarded as an index of
economic, social and commercial progress of
the country”.
Modes of Transport
• Land transport
• Water transport
• Air transport
Two major means of land transport are Roads
and railways.
5. Advantages of Railways
Political Advantages
• Railway have joined people of different castes,
religions customs and traditions.
• With adequate network of railway central
administration has become easy and effective
• Role of railway during emergencies in mobilising
troops and war equipment has been very significant.
• Railway have helped in mass migration of people.
6. Social Advantages
• Feeling of isolation has been removed from the
inhabitants of Indian villages.
• The social outlook of the masses has been
broadened through railway journeys.
• Railway has made it easier to reach religious
importance
• Provide safe and convenient mode of transport for
the country
7. Economic advantages
• Mobility of people has increased.
• Transport food and clothes during famines.
• Transport raw material to the industries
• Provide employment to millions of people.
• Land values increased due to industrial
development.
• Price stabilisation is possible.
8. Techno-economic advantages
Cost saving in transportation of long haul bulk traffic.
Energy efficient (1/7 fuel used as compared to road
sector)
Environment friendliness
Higher Safety (fatal accidents 1/10 of road sector in
India)
9. Features Rail Transport Road Transport
Tractive resistance The movement of steel wheels on steel rails has
basic advantage of low rolling resistance. This
reduces haulage costs because of low tractive
resistance.
The tractive resistance of a pneumatic tyre
on metalled roads is almost five times
compared to that of wheel on rails.
Right of entry A railway track is defined on two rails and is
within protected limits. Trains work as per a
prescribed schedule and no other vehicle has the
right of entry except at specified level crossings.
Roads, though having well-defined limits,
can be used by any vehicular traffic and even
by pedestrians they are open to all.
Cost analysis Owing to the heavy infrastructure, the initial as
well as maintenance cost of a railway line is high.
The cost of construction and maintenance of
roads is comparatively cheaper.
Gradients and
curves
The gradients of railway tracks are flatter
(normally not more than 1 in 100) and curves are
limited up to only 100 on broad gauge.
Roads are constructed normally with steeper
gradients of up to 1 in 30 and relatively
much sharper curves.
Flexibility of
movement
Due to the defined routes and facilities required
for the reception and dispatch of trains, railway
can be used only between fixed points.
Roads transports have much more flexibility
in movement and can provide door to door
sevices.
Environmental
pollution
Railway has minimum adverse effects on the
environment.
Road transport creates comparatively
greater pollution than the railways.
Organization and
control
Railways are government undertakings, with their
own organization.
Barring member state government
transport, road transport is managed by
private sector.
Suitability Railways are best suited for carrying heavy goods
and large number of passengers over long
distances.
Road transport is best suited for carrying
lighter goods and smaller number of
passengers over short distances.
10. Development of Indian Railway(IR)
• In 19 century before the introduction of railways, India
was a country with extremely poor means of
communications.
• In1844 the first proposals for the construction of
railway on India was submitted to East India Company
• In 1853 first railway line between Bombay to Thana was
opened.
• In 1905 Railway Board was established with one
president and two members.
• In 1939 total route kilometrage of India was 65,850
kms.
11. First Five Year Plan (1951-1956)
• out of total plan expenditure of Rs. 2378
crores the railway were allotted only 257
crores
• Rehabilitation of railway assets was main
objective.
• Industries boosted up their locomotive
production during these years
• Considerably helped India in achieving self
sufficiency
12. Second five year plan (1956-1961)
• Second five year plan had a provision of Rs. 896
crores for the development of Indian railways
out of total expenditure of Rs. 4800 crores.
• Many new lines were opened, and new
locomotives and coaches were placed on line.
• Considerable progress was made in
electrification of railway.
13. Third five year plan (1961-1966)
• Second five year plan had a provision of Rs.
1470 crores for the development of Indian
railways out of total expenditure of Rs. 7500
crores.
• Plan provided acquisition of 2070
locomotives, 157133 wagons and 7879
coaching vehicles.
• Made a provision for electrification about
2400 route kms.
• A length of 2400 kms new lines was also
constructed.
14. Fourth five year plan (1969-1974)
• With objective of modernisation of railway.
• Improving the operational efficiency of the
system by more intense utilisation.
Fifth five year plan (1974-1978)
Development of rapid transport system in
metropolitan cities.
A sum of 2200 crores were allotted out of total
39300 crores.
15. Sixth five year plan (1980-1985)
• Main objective was the limited resources of
the railways should be used for rehabilitation
of assets.
• The stress was to use existing resources in
best possible manner for getting high
operating efficiency.
16. Seventh five year plan (1985-1990)
• Provided for an outlay of Rs. 12334 crores.
• Augmentation of capacity for manufacturing
of passenger coaches, electric multiple units
and electric locomotives.
• Introduction of computer based freight
operation information system and
computerisation of passenger reservation.
17. Eighth five year plan (1992-1997)
Provided an outlay of 27202 crores.
Emphasis on modernisation of system to reduce
operating cost and improve reliability.
Convert a length of 6000 km of M.G and N.G
tracks to broad gauge.
18. Ninth five year plan (1997-2002)
Outlay of 45413 crore (14.1% of total plan)
Generation of rail transport capacity to handle
increased freight and passenger traffic.
Completion of replacement, rehabilitation and
renewal of over aged assets.
To continue with the policy of Uni-guage
throughout the country.
Introduction of 4000 H.P. diesel locomotives
and 6000 H.P. electric locomotives.
19. Organization of Indian Railway (IR)
• Biggest public undertaking
• Capital-at-charge of about Rs 560,000 million.
• The executive authority in connection with
the administration of railway vests with
Central Government and the same has been
delegated to Railway Board as per Indian
Railway Act 1890 and Indian Tramway act of
1816.
20. Railway Board (RB)
• RB exercise all powers of central government in
respect of regulation, construction, maintenance,
and operation of railway.
• RB consists of a chairman, a financial commissioner,
and five other functional members.
• Chairman reports to Minister for railway.
• The member of RB are separately in charge of
matters relating to staff, civil, electrical, mechanical
and traffic.
21. • Presently IR is divided into 17 zones.
• Each Zonal railway is administered by a general
manager(GM) assisted by additional GM and
HOD of different disciplines, namely, civil
engineering, mechanical, operating, commercial,
accounts, security, signals and
telecommunications, electrical, personnel,
medical, etc.
• Zonal railway is further divided into 3 to 6
divisions.
• Each division work under control of Divisional
railway manager (DRM).
22. • There are divisional officers in charge of each
discipline namely, divisional superintending engineer
(DSE) or Divisional Engineer for civil engineering etc.
• DSE is normally the head of the unit in the division.
• Under each DSE, there are 2 to 3 divisional engineers
(DENs)
• Each DEN is assisted by 2 to 3 assistant engineers
(AENs).
• An AEN has about 400 integrated track km under his
charge.
• The AENs are assisted by permanent way inspectors.
24. • MAGLEV Trains: The technology of such trains
is based on principle of magnetic repulsion.
• MAGLEV trains runs on U-shaped guide way.
The train as well as the guide way will be
equipped with magnets having south and
north pole arranged alternately.
25. Tube railways :- The railway provided
underground at a greater depth of about 18 m
or more (up to 52 m) are called tube railways.
This system of railways is so called as the
section of the underground tunnels, carrying
the track, is to avoid the interference of the
tracks with water and gas pipes, sewerage
systems and oil or drainage pipes, etc
Some important features of the tube
railways are given below :-
• The railways stations have to be of cylindrical
form.
26. • Escalators or moving stair cases are to be
constructed to reach the tube railways.
• Only electric traction to be used to avoid the
smoke and ventilation problems.
• Automatic signaling system is to be used.
Such a mechanism of the train is to be used that it
cannot start until all the doors are closed, and it
automatically stops, if the signal is at ‘STOP’
position.
This system of railways is used by the London
Post Office in transporting mails through a small
diameter tunnel with automatic control without
any driver.
27. A Metro or rapid transit system is a public
transport system in an urban area with high
capacity, high frequency not needing timetables,
is fast and is segregated from other
traffic. Operating on an exclusive right of way,
rapid transit systems are typically grade
separated and located either in underground
tunnels (subways) or elevated above street level
(elevated transit line).
28. Important Technical Terms
There are many important technical terms
concerning to Railways, but a few terms which are
of immediate concern are only discussed bellow:-
1. Railway track:-A track formed of rails of iron or
steel along which trains are driven is known as
railway track.
In general, the term railway also includes all
lines of rails, sidings or branches.
2. Rolling stock:- The locomotives, passenger
coaches and goods wagons which roll or run on
railway tracks constitute rolling stock.
29. 3. Locomotive:- The mechanical device which
transfers chemical energy of fuel into
mechanical energy in the form of motion is
called locomotive.
The fuel used in the locomotives may be in
the form of water and coal, diesel or
electricity.
4. Wagons :- The goods compartments are
called wagons. This term applies only to
good stock.
5. Coaches or vehicles :- The passenger
compartments are called coaches or vehicles.
This term applies only to coaching stock.
30. 6. Siding: when a branch starting from main line
terminates at the dead end with a buffer stop is
known as siding.
7. Ballast: is the granular material packed under
and around the sleepers to transfer the loads
from the sleepers to subgrade.
31. TYPES OF GAUGES PREVALENT IN
INDIA
The different gauges prevalent in India are of
the following these types :-
1. Broad gauge (1676),
2. Meter gauge (1000),
3. Narrow gauge (762 mm & 610 mm).
In India, efforts are being made to convert all N.G. and M.G. lines
to B.G. lines on important sections as and when funds are
available.
32. Permanent Way
Permanent way: The combination of rails, fitted
on sleepers with the help of fixtures and
fastenings and resting on ballast and subgrade
is called the railway track or permanent way.
36. Track Components
• Gauge: defined as the minimum distance
between two rails. Indian Railway follows this
practice.
• Rails act as girders to transmit the wheel load to
the sleepers.
• Rails are joined in series by welding a few of them
(5 of them) and the welded lengths are joined by
fish plates and bolts.
37. • Rails are fixed to sleepers by different types of
fixtures and fastenings (chairs, bearing plates,
fish plates, fish bolts, spikes etc.).
• Sleepers hold the rails in proper position with
respect to their proper tilt, gauge and level
and transmit the load from rails to the ballast.
These sleepers are suitably spaced, packed
and boxed (the process of filling the ballast
around the sleepers) with ballast. The typical
length of a BG sleeper is 2.7 m.
• Ballast is a high quality crushed stone with
desired specifications placed directly below
the sleeper.
38. • Ballast distributes the load over the formation
and holds the sleepers in position and also
functions as drainage layer.
• Formation is the compacted and prepared
subgrade which is the part of embankment or
cutting
• Natural subgrade is the soil in the natural
ground on which the track rests.
• Ballast cushion: The depth of ballast below the
bottom of the sleeper, normally measured
under rail seat is termed as ballast cushion.
39. • Ballast shoulder: Ballast provided beyond the
sleeper edge is termed as ballast shoulder
(shown as C in Fig., typically 0.35 m in a BG
track)
• Ballast Base: It is the bottom width of ballast-
bed (typically 4.4 m in a BG track).
• Formation width: It is the top width of
embankment or bottom width of cutting
(Typically 6.1 m in a BG track)
• Cess width: Width of formation beyond the
toe of ballast is termed as cess width.
41. REQUIREMENTS OF AN IDEAL PERMANENT WAY
The following are the principal requirements of an
ideal permanent way or of a good railway
track :-
i. The gauge of the permanent way should be
correct and uniform.
ii. The rail should be in proper level in straight
portion. Proper amount of super elevation
should be provided to the outer rail above the
inner rail on curved portion of the track.
iii. The permanent way should be sufficiently
strong against lateral forces.
42. iv. The curves, provided in the track, should be
properly designed.
v. An even and uniform gradient should be
provided through out the length of the
track.
vi. The tractive resistance of the track should
be minimum.
vii. The design of the permanent way should be
such that the load of the train is uniformly
distributed on both the rails so as to
prevent unequal settlement of the track.
viii. All the components parts such as rails,
sleepers, ballast, fixtures and fastenings,
etc. should satisfy the design requirements.
43. ix. All the points and crossings, laid in the
permanent way, should be properly designed
and carefully constructed.
x. It should be provided with proper drainage
facilities so as to drain off the rain water
quickly away from the track.
xi. It should be provided with safe and strong
bridges coming in the alignment of the track.
xii. It should be so constructed that repairs and
renewals of any of its portion can be carried
out without any difficulty.
44. Length of Indian Railway Track
• Route kilometer: this is the route length of
railway between origins and destinations
• Running track kilometer: This is the length of
running track on a route. On a route with
double track, the running track kilometer is
about twice the route kilometer.
• Total track kilometer is the physical length of
track available. This length is arrived at after
giving due weightage for the length of track
on track junctions, sidings, etc., and adding it
to the running track kilometer.
45. Length of Indian Railway Track
Type of Track Length*, km
Broad Gauge (BG) 46806
Meter Gauge (MG) 13290
Narrow Gauge (NG) 3124
Total track route km 63220
Total running track km 83859
Total track km 108486
*As on 31st march 2004
46. Selection of Guages
1.Cost of construction
• There is marginal increase in the cost of
earthwork, rails, sleepers, ballast, and other track
items with gauge.
• The cost of station buildings, platforms, signals,
bridges, tunnels and culverts etc., is same more or
less for all gauges.
• There is little proportional in the acquisition of
land.
• The cost of rolling stock is independent of the
guage used for same volume of traffic.
47. 2.Volume and nature of traffic.
• For heavier loads and high speed, the wider
guage are required because subsequently the
operating cost per tonne-km is less for higher
carrying capacity.
3.Speed of movement
• Speed is a function of dia. of wheel, which in
turn limited by the guage. (wheel diameter =
0.75 x Gauge).
48. 4.Development of areas
• Narrow guages can be used for thinly
populated area by joining under developed
area with developed or urbanised area.
5.Physical features of the country
• Use of narrow guage is warranted in hilly
regions where broad and meter guage are not
possible due steep gradients and sharp
curves.
49. Rails
The rails on the track can be considered as steel
girders for the purpose carrying axle loads. Flat
footed rails are mostly used in Indian railways.
Functions of Rails
• Provide hard, smooth and unchanging surface
for the passage of heavy moving loads with
minimum friction steel rails and steel wheels.
• The rail material should be such that it gives
minimum wear to avoid replacement and
failure.
50. • Rail transmit loads to the sleepers and
consequently reduce pressure on ballast and
formation below.
Composition of rail steel
For ordinary rails
Carbon (C) - 0.55 to 0.68 percent
Manganese (Mn) - 0.65 to 0.9 percent
Silicon (Si) - 0.05 to 0.3 percent
Sulphur (S) – 0.05 percent or below
Phosphorus (P) – 0.06 percent or below
51. For rails at points and crossings
Carbon (C) - 0.5 to 0.6 percent
Manganese (Mn) - 0.95 to 1.25 percent
Silicon (Si) - 0.05 to 0.2 percent
Sulphur (S) – 0.06 percent or below
Phosphorus (P) – 0.06 percent or below
52. Requirements of rails
• They should be of proper composition of steel and
should be manufactured by open hearth or duplex
process.
• The vertical stiffness should be high enough to
transmit the load to several sleepers underneath.
• Rails should be capable of withstanding lateral
forces. Large width of head and foot endows the
rail with high lateral stiffness.
• The head should be sufficiently deep to allow for
an adequate margin of vertical wear.
• Web of the rail should be sufficiently thick to bear
the load coming on it and should provide
adequate flexural rigidity in horizontal plane.
53. • Foot should be wide enough so that rails are
stable so that rails are stable against
overturning especially on curves.
• Bottom of the head of rail and top of the foot
should be so shaped as to enable the fish
plate to transmit the vertical load efficiently
from head to the foot at rail joints.
• The centre of gravity of the rail section must
lie approximately at mid height so that the
maximum tensile and compressive stresses
are equal.
• The tensile strength of the rail piece should
not be less than 72 kg/mm2.
54. Types of rail sections
• Double headed rails(D.H Rails)
• Bull headed rails(B.H rails)
• Flat footed rails(F.F rails)
In the beginning, the rails used were double
headed(D.H) of a dumb-bell section. The idea
behind using of these rails was that when the
head was worn out in course of time, the rail
can be inverted or reused. But the experience
shows that such indentation are formed in
lower table due to which smooth running over
that surface at the top was impossible.
55.
56. The next evolution was that of a bull headed rail in
which the head is made little thicker and stronger
than the lower part, by adding more metal to it, so
that even after wear, it can withstand stresses.
In designing flat footed rails it was initially thought
that flat footed rail can be fixed to the sleepers
directly and would eliminate the need for chairs and
keys required for the bull headed rails. However it
was observed that heavy train load cause the foot of
the foot of rail to sink into wooden sleeper, to
remedy this steel plates are used between the
sleeper and the rails at joint and other important
places.
59. Details of standard rail sections
90 R rail section was considered adequate only
for annual traffic of about 10 gross million
Tonne (GMT) speeds upto 100 kmph and
service life upto 20 to 25 yrs.
52 MR (i.e.52 kg/m) rails are suitable for use of
speed of 130 kmph and traffic density of 20 to
25 GMT.
60 MR (i.e. 60 kg/m) rails are suitable for use
upto a speed of 160 kmph and traffic density of
about 35 GMT.
60.
61. • Hogged rails: due to battering action of
wheels over the end of rails, the rail get bent
down and deflected at the ends, this hogging
is due to loose packing under the joint and/or
loose fish plate. Can be removed by
Cropping, replacing, welding and dehogging.
• Kinks in rails: when the ends of adjoining rails
move slightly out of position , “shoulders” or
“kinks” are formed. Kinks formed due to loose
packing at joints, defects in guage, and
alignment, defects in cross level at joints,
uneven wear of rail head, where kinks are
formed at joints .
62. • Buckling of rails: buckling means track has
gone out of its original position or alignment
due to prevention of expansion of rails in hot
weather on account of temperature
variations. Causes are following
I. When expansion gap is not sufficient
II. The fish plate are bolted so tight that no slip
is allowed.
III. Due to presence of longer welded rail on
weak tracks.
63. Wear on rails
• Wear is one of the prominent defects of rails.
Due to heavy loads concentrated stresses
exceeds the elastic limit resulting in metal
flow; on the gap or joints the ends are
battered and at the curves the occurrence of
skidding, slipping and striking of wheel flanges
with rails results in wear and tear on rails.
64. Classification of wear
• On the basis of location
I. On sharp curves
II. On gradients
III. On approach to stations
IV. In coastal area etc.
• On the basis position of wear
I. On the top of rail
II. At the end of rail
III. on the sides of the head
65.
66. Methods to reduce wear
• When wear exceeds the permissible limit (5 %
of the total weight section) the rail must be
replaced.
• Use of special alloy steel at the location where
wear is more.
• Reduction in number of joints by welding
• Regular tightening of fish bolts and packing of
ballasts.
• Welding and dehogging of battered ends in
time also the wear.
67. • Maintenance of correct gauge will reduce the
side wear in particular.
• Lubricating of the gauge face of outer rail on
curve, will also reduce the wear.
• Interchanging of inner and outer rails and
changing face at curve will reduce the wear.
• Application of heavy mineral oil, in case of
corrosion of rail metal under adverse
atmospheric conditions, reduce the wear of
rail.
68. Creep of rails
• Longitudinal movement of rail with respect to sleepers in a
track is called creep.
Indication of creep
• Closing of expansion spaces at joints
• Marks on flanges and web of rails made by spike head, by
scraping or scratching at rail slide.
69. Theories of creep
1. Wave action or wave theory:
Wave motion is set up by moving loads of wheels.
The vertical reverse curve ABC is formed in the
rail ahead of wheels, resulting from the rail
deflection under the load.
70. 2. Drag (or) Dragging theory:
✓ Backward thrust on driving wheels of locomotive of train
push the rail off track backward.
✓ Mean while other wheel of locomotive and vehicles push
the rail in the direction of travel.
✓ Since drag effect is more as explained in Wave Action
Theory resultant creep of rails in forward direction.
3.. Percussion Theory:
This theory states that the creep is due to impact of wheels at
the rail end ahead at joints. Hence as and when wheel leave
the trailing rail and strike the facing rail end at each joint it
pushes the rail in forward direction resulting in creep.
71. 4. Starting, accelerating, Slowing down (or)
stopping of a train:
✓Backward thrust of the engine driving wheels
push the rails backward when a train is
starting and accelerating.
✓When slowing down or stop the vehicle
braking forces are push the rail forward.
72. 5. Unbalanced Traffic:
a) Single line:
✓ Heavy equal loads pass in both direction, the
creep is balanced. If not creep takes place in
the heavy load direction.
b) Double line:
✓ Since loads are in unidirectional creep occurs
in both directions.
73. Factors effecting the magnitude & direction of
creep.
• Alignment of track: Creep is more on curves than
on tangent tracks.
• Grade of track: More in case of steep curves,
particularly while train moving downward with
heavy loads.
• Type of rails: older rail have more tendency than
new one.
• Direction of heaviest traffic: In heavier load
moving direction occurs more creep.
74. Effects of creep
• Most serious effect of creep is being buckling of track.
• Common effects of creep:
• Sleepers move out of square and out of position, affects
the gauge and alignment of track. As sleepers move
surface is disturbed results uncomfortable riding.
• When joints are opened out beyond the permissible
stress in bolts and fish plates tendency to occurrence of
failure in them.
• Rails ends also battered due to occurrence of excessive
gaps at joints. While at other places , joints are jammed
and prevent required expansion due to thermal
stresses.
75. Contd..
• Points and crossings get distorted, its too
difficult to set them to correct gauge and
alignment. Movement of switches is made
difficult and interlocking is thrown out of gear.
76. • Its difficult to fix the removed rail at proper
position during repair works since the time gap
becomes too short or too long due to creep.
• Smashing of fish plates, bolts, bending of bars,
kinks at joints of rails and forging of ballast
ahead, common effects of creep.
• If creep is not prevented in time it will results
derailment.
77. Remedies of creep:
1. Pulling back the rails:
✓ pull back the rail to its original position. By means of
crow bars and hooks provided through the fish bolts
wholes of rails
✓ By considering the position of joints relative to sleepers
and both rails should be in respective position.
2. Provision of anchors :
✓ By use of anchors and sufficient crib ballast.
✓ For creep 7.5 cm-15 cm 4 anchors per rail
✓ For creep 22.5 to 25 cm 6 anchors.
3. Use of steel sleepers:
✓ Sleepers should be made up of good material with
proper fitting. Sleepers should provide good grip with
ballast to resist the movement of sleepers. Increase in
no. of sleepers.
80. Coning of Wheels
• The wheels of locomotive are not flat but
sloped or coned at a slope of 1 in 20.
• The distance between inside edges of wheel
flanges (B) is generally kept less than the
gauge (G). This results in a gap of 1 cm
between flange and running face of rail.
81. Theory of coning
Advantages of coning:
✓ Reduce the wear and tear of wheel flanges and rails.
✓ To provide possibility of lateral movement of the axle with its
wheels.
✓ To prevent the slipping of wheels.
Theory of coning:
✓ On level track, as soon as the axle moves towards one rail, the
dia of the wheel tread over the rail increases, while it
decreases over the other rail. This prevents the further
movement and axle get back to its original position.
✓ Due to rigidity of the wheel base either the wheel must slip by
an amount equal to the difference of length or the axle move
slightly outwards to provide a tread of longer diameter over
the outer rail and smaller diameter over the inner rail.
83. If the tread dia. on both the rails is same then
amount of slip is:
Slip=θ (R₂-R₁)
Where, outer radius, R₂= R+(G/2)
R₁= R- (G/2)
G=Gauge
θ= angle at centre in radians.
Slip= θ×G
G=1.676 meters for B.G
Slip= (2πθ˚/360) ×1.676
θ˚=angle at centre (degree)
Therefore, Slip = 0.029 m per degree of central angle
84. SLEEPERS
Sleepers: these are members laid transverse to the rails on
which rails are supported and fixed to transfer the loads
from rail to ballast and subgrade below.
Functions of sleepers:
▪ To hold the rails to correct gauge.
▪ To act an elastic medium between the ballast and rail
to absorb the blows and vibrations due to moving
loads.
▪ To distribute load from the rail to the index area of
ballast or to the girders in case of bridges.
▪ To support rails - at proper level in straight tracks
- at proper super elevation on curves
85. • Sleepers also provide longitudinal and lateral
stability of the permanent track on the whole.
Requirements of sleepers: an ideal sleeper
should possess the following characteristics.
• Sleeper should be economical i.e, minimum
initial and maintenance cost.
• Fitting of the sleepers should be easily
adjustable during maintenance operations.
Such as
✓Lifting
✓Packing,
✓Removal and replacements.
86. ✓The weight of the sleeper should not be too
heavy or excessively light i.e. with moderate
weight they should be for ease of handling.
✓Design of sleepers should be such a way that the
gauge and alignment of track and levels of the
rails can easily adjusted and maintained.
✓The bearing area of sleepers below the rail seat
and over the ballast should be enough to resist
the crushing due to rail seat and crushing of
ballast under sleepers.
✓Design and spacing such a way to facilitate easy
removal and replacement of ballast.
87. • Sleepers should be capable of resisting shocks
and vibrations due to passage of heavy loads of
high speed trains.
• Sleepers design should be such a way they are
not damaged during packing process.
• Design should be strong enough so that they are
not pushed out easily due to the moving trains
especially in case of steel sleepers with rounded
ends.
• An ideal sleeper should be anti-sabotage and
anti-theft qualities.
88. • Classification of sleepers.
1. Wooden sleepers:
✓ Wooden sleepers regarded to be best as they are fulfill all
the requirements of ideal sleeper.
✓ Life of timber sleepers depends on their ability to resist
wear, decay, attack by vermin, and quality of timber.
✓ Easily available ( Sal, teak, chir and deodar).
✓ Fittings to the wooden sleepers are few and simple in
design.
✓ Resist shock and vibrations.
✓ But it is difficult to maintain gauge in case of wooden
sleepers.
✓ Service life is minimum (12 to 15 years) and maintenance
cost is also high as compared to other sleepers.
89. Composite sleeper index (C.S.I):
▪ It is an index to determine the suitability of
timber for use as a sleeper.
▪ This is measure the mechanical strength of
timber, derived from its composite properties of
strength and hardness.
C.S.I = (S+10H)/20
min value of CSI are 783,1352 and 1455 for track,
crossing and bridge sleeper respectively.
S= strength index both for green and dry timber at
12% of moisture content.
H=hardness index both for green and dry timber at
12% of moisture content.
90. Treatment of wooden sleepers:
✓ To improve the life of timber up to 30 to 50%.
✓ Timber has minute cells filled with juices, therefore
by replacing these juices by means of preserving
solutions is known as treatment.
Preserving solutions are:
i. Creosote: Creosoting is done at temp. 49˚C and 21
kg/cm²
ii. Salt- solution: Chloride of zink (ZnCl2)-process is
called Burnettising.
iii. Bichloride of mercury- salt solution (Hg Cl2)-
kyanizing
91. 2. Metal sleepers:
✓ These are either steel or cast iron, mostly cast
iron since it is less prone to corrosion.
Requirements of metal sleepers:
✓ They should be capable of the tensile and
compression stress due to the moving loads.
Cast iron sleepers:
a. Pot or bowl sleepers
b. Plate sleepers
c. Box sleepers
d. C.S.T 9(Central standard trial)sleepers
e. Rail free duplex sleepers
92. Pots or bowl sleepers:
✓They consists of two bowls placed inverted on
the ballast.
✓Effective bearing area 0.232 sq.m is provided
under each rail support.
✓On top of the pot, a rail seat or chair is provided
to hold the F.F rail or B.H rail with cant of 1 in
20.
✓Weight of sleeper is 114 kg. it can be used on
curves, sharper than 4˚ on B.G.
93.
94. C.S.T-9 (Central Standard Trial-9)sleepers: it is
standardized by track standard committee. It
has triangular inverted pot on either side on
rail seat, a plate with projecting rib and a box
on the top of plate.
95. • C.S.T.-9 sleeper for B.G. weighs 103 kgs. This can be
easily assembled as shown in fig.
• Here tie bar is fastened to the plate by means of
four standard cotters. Small variation in gauge can
be corrected by these 4 cotters.
• Shape of cast iron support in such a way to provide
stable base for the rail, lateral and longitudinal
stability of track.
• Mild steel two way key is provided to resist creeping
movement of the rail.
• Rail seat has 1 in 20 cant and 11.4 cm width in B.G.
• Form rigid track subjected to vibration under
moving load without any damping or absorption.
• Suitable for speed up to about 110 kmph.
96. Steel sleepers:
Various types of steel sleepers
1. Key type a) lugs or jaw pressed out of metal
b) with loose lugs or jaws
2. Clip bolt type
3. Saddle or spring type.
Features
• Fastening to the sleepers are less in numbers and
simple in nature.
• Gauge by use of steel sleepers can be easily adjusted
and maintained.
• Life of sleepers is much more than wooden sleepers.
• Cost is relatively more than wooden sleepers.
97.
98. 3. Concrete sleepers:
Two types of concrete sleepers
i. Reinforced concrete sleepers
ii. Pre-stressed concrete sleepers.
Concrete material is called as ideal sleeper due to
i. They made up of strong homogeneous material.
ii. Impervious to effect of moisture.
iii. Unaffected by the chemical effect of atmospheric
gases or sub soil salts.
iv. Easy to mould into required shapes to withstand
the stresses developed by moving loads.
99. Reinforced concrete sleeper: these are 2 types
1. Through type: in this type when concrete sleepers is
stressed, cracks on the tension side are inevitable.
Though these cracks are very small they tend to
enlarge with repetition of the impact loadings of fast
trains. This is the major reason for the failure of this
sleeper.
2. Composite tie type
Prestressed concrete sleepers:
drawbacks of previous one can be eliminated by this type of
sleepers,.
1. In this concrete is put under very high initial compression.
2. The max permissible compressive strength of 211 kg/cm2.
3. Max. cube crushing strength of concrete in the sleeper is
422 kg/cm2 at 28 days.
4. Pre-stressed wires are stressed to an initial stress of 8.82
kg/cm2.
105. Adzing of Sleepers:
In order to obtain an inward slope of 1 in 20 for the rail,
sleepers are adzed to form a table at this slope at the rail
seat.
This process is known as adzing of sleepers. Generally
adzing is done for wooden sleepers.
For smooth and comfortable journey accurate adzing is
required.
1 in 20
slope
1 in 20
slope
106. Ballast material:
1. Broken stone:
✓ It is the best material for the ballast. Mostly stone
ballast is used in all important tracks.
✓ The best stone for ballast is a nonporous, hard and
angular. Igneous rocks such as hard trap, quartzite and
granite are good material and are used in large
quantities for high speed tracks in India.
✓ For stability , graded broken stone ballast is better than
ungraded one.
✓ The size of stone ballast should be 5 cm for wooden
sleepers and 4 cm for metal sleepers.
107. 2. Gravel or river pebbles or shingle:
Gravel is second best material for ballast material.
Source: river bed, gravel pits.
Due to smoothness of the particles these are liable to
displace the sleeper and the packing does not hold.
3. Ashes or cinders:
Earlier this is available in large scale on railways since
coal been used in locomotives.
It can provide excellent properties since it is very porous
in nature.
It is very cheap and can be used in sidings but not in
main lines as it is very soft and gets reduced due the
wheel load pressure and make the track very dusty.
108. Due to its corrosive quality it corrodes the steel sleepers
and foot of the rail.
But in emergency such as floods ashes or cinders can be
used for the repairing formation or packing tracks.
4. Sand:
It is cheap and provides good drainage. It is particularly
good for packing pot sleepers.
But the drawback is it gets into the moving parts and on
the track causes heavy wear therefore leads to high
maintenance cost.
109. 6. Kankar:
It is a lime agglomerate. It can be used where stone is
not available. It can be used in road and railways as
well. Under the application of loads it will become
powder therefore it can be used only in M.G & N.G.
7. Brick ballast:
Where no stone or other substitutes available it can
be used. It can be easily powdered and creates
dusty tracks.
8. Blast furnace slag:
It is a by-product in the manufacture of pig iron
forms. The material should be hard and with high
density and these are free from gas holes.
9. Selected earth
110. Size of ballast:
The broken stones either of too big size or too small size
are found unsuitable for railway ballast.
Size of ballast depends upon
▪ Type of sleepers
▪ Maintenance method
▪ Location of the track.
The size of the ballast used varies from 20mm to 50mm with
reasonable proportion of intermediate sizes. The exact size
of the ballast depends upon the type of sleepers.
▪ For wooden sleepers-51mm
▪ For steel sleepers-38mm
▪ For under switches, points and crossings-25.4mm
111. Minimum depth of ballast section:
The wheel load dispersion in the ballast is
assumed at 45˚ to the vertical.
For uniform distribution of load on the
formation, ballast depth should be such that
the dispersion lines should not overlap each
other.
Therefore, depth of ballast can be calculated by
Sleeper spacing (s)=
width of sleeper(w)+2×depth of ballast
112. Tests on ballast: Ballast material quality is defined by its
particle characteristics. Therefore testing of ballast material
is required to define these characteristics.
Tests for ballast material:
Durability tests:
Three abrasion tests are mainly using:
Los Angeles abrasion: it’s a dry test to measure toughness or
tendency for breakage of aggregate.
It consists 12 steel balls in a large steel drum for 1000
revolutions. Impact of steel balls cause crushing on ballast.
Material from the test should sieve with 1.7 mm sieve.
The LAA value =((w₁-w₂)/ w₁)×100
Here
w₁= total weight of specimen
w₂= weight of material retained on the 1.7 mm sieve.
114. Crushing test:
• To test resistance of an aggregate to crushing under wheel
loads.
• The aggregate passing 12.5 mm IS sieve and retained on
10 mm IS sieve is selected for standard test. Material is
placed in a steel mould of 150 ×180 mm deep.
• Load is applied through the plunger at a uniform rate of 4
tonnes per minute until the total load is 40 tonnes, and
then the load is released.
Aggregate crushing value = (w₂/ w₁) ×100
Here
Total weight of dry sample taken = w₁
Weight of the material passing through 2.36mm sieve = w₂
115. Impact test:
It measures the toughness to sudden shocks and impact
loads.
Aggregate size of passing through12.5mm sieve and
retained on 10 mm sieve placed in a steel mould.
Subjected to 15 blows with 14 kg weight of hammer at a
height of 380mm.
Aggregate impact value = (w₂/ w₁) ×100
Here
Total weight of dry sample taken = w₁
Weight of the material passing through 2.36mm sieve = w₂
117. Shape tests:
Flakiness index: The flakiness index of aggregates is the
percentages by weight of particles whose least
dimension(thickness) is less than 0.6 of their mean
dimension.
Elongation index:
• The elongation index of an aggregate is the
percentage by weight of particles whose greatest
dimension (length) is greater than 1.8 times of their
mean dimension. The elongation test is not applicable
to sizes smaller than6.3 mm.
120. S.no Characteristics Tests
1 DURABILITY Los Angeles abrasion
Mill abrasion
Deval abrasion
Clay lumps and friable particles
Crushing value
Impact
2 SHAPE AND SURFACE
CHARACTERISTICS
Flatness
Elongation
Angularity or Roundness
Fractured particles
Surface texture
3 GRADATION Size
Size distribution
Fine particles content
4 UNIT WEIGHT Specific Gravity
Absorption
5 ENVIRONMENTAL Freeze- Thaw breakdown
Sulfate soundness
121. Track fittings and rail fastenings are used to keep the rails in
the proper position and to set the points and crossings
properly.
They link the rails endwise and fix the rails either on chairs
fixed to sleepers or directly on to the sleepers.
The important fittings commonly used are:
1. Fish plates
2. Spikes
3. Bolts
4. Chairs
5. Blocks
6. Keys
7. plates
Track Fittings and Fastenings
122. Pandrol clip or elastic rail clip
• The Pandrol PR 401 clip is standard type of fastening used
in I.R.
• Earlier manufactured by Messrs and Guest, Keens and
Williams.
• Require very less maintenance.
• Spring steel bar with a dia of 20.6 mm and is heat treated.
• It exerts a toe load of 710 kg for a nominal deflection of
11.4 mm.
• Can be fitted to wooden, steel, cast iron and concrete
sleepers.
• Disadvantage is that it can be taken out using ordinary
hammer so does not provide enough safeguard.
123. Fish plates: these are used in rail joints to maintain the
continuity of the rails and to allow expansion and
contraction.
Requirements of fish plates:
• Fish plates should maintain the correct alignment both
horizontally and vertically.
• They should support the underside of the rail and top of
the foot.
• Provide proper space for the expansion and contraction
• They should be made up of such a section to withstand
shocks and heavy stresses due to lateral and vertical B.M
Sections of fish plates:
Various sections have been designed to bear the stresses due
to lateral vertical bending.
Standard section is bone shaped
125. Design of fish plate section is depends up on the various stresses due
to lateral and vertical bendings.
The strength of fish plate can be increased by means of increase in
the depth but the c/s of fish plate is constant through out the
length.
Ex:
Bone shaped plate for F.F rails
Increased depth fish plate for B.H rail.
Spikes:
For holding the rails to the wooden sleepers, spikes of various types
are used.
Requirements of spikes:
Spikes should be strong enough to hold the rail in position and it
should have enough resistance against motion to retain its
original position.
The spikes should be deep for better holding power.
It should be easy in fixing and removal from the sleepers.
The spikes should cheap in cost and it should capable of maintaining
the gauge.
126. Various types of spikes:
1. Dog spikes: For holding F.F rail to wooden
sleeper.
These are stout nails to hold rail flanges with timber
sleepers.
The only disadvantage of these spikes is that due to
wave motion of rail the spike is driven out of the
sleepers which reduce the pressure on the foot
of F.F rails, resulting in creep occurrence.
127.
128. 2. Screw spikes: these are tapered screws with V-
threads used to fasten the rails with timber sleepers.
These are more stronger than dog spikes in holding
power.
These are costly and the gauge maintenance is more
difficult than earlier one.
129. Round spikes:
The head shape is either cylindrical or hemi
spherical.
These are used for fixing chairs of B.H. rails to
wooden sleepers and also fixing slide chairs of
points and crossing.
130. Standard spikes:
These are used for cast iron chairs only to fix them with
timber sleepers.
Elastic spikes:
The disadvantages of dog spikes can be eliminated by this.
The advantages of this spikes is its head absorbs the wave
motion without getting loose.
Chairs:
These are used for different types of rails
C.I Chairs:
For holding D.H and B.H rails, chairs are used. B.H rails are
supported on C.I Chairs fixed to the sleepers by round
spikes.
Slide chairs:
These are plates of special shape on which the stock and
tongue rails rest.
131.
132. Blocks: when two rails run very close as in case of
check rails, etc. small blocks are inserted in
between the two rails and bolted to maintain the
required distance.
Bolts: used for fixing various track components in position.
Dog or hook bolt: when sleepers rest directly on
girder they are fastened to top flange top flange
of the girder by bolts called dog bolts.
Fish bolt: made up of medium or high carbon steel.
For a 44.7 kg rail, a bolt of 2.5 cm. dia. and 12.7
cm length is used. With each fish plate standard
practice is to use four bolts. Generally, a
projection of 6 mm of the shank is left out after
the nut is tightened.
133. Keys:
Keys are small tapered pieces of timber on steel to fix rails
to chairs on metal sleepers.
Morgan key:
This is about 18 cm long and tapered 1 in 32. these are suit
the C.I chair, plate sleepers and steel sleepers with the
rail.
The advantages of morgan keys are
• They can be used as left hand or right hand keys.
• They are light in weight due to double recess on either
side.
• They are versatile in nature.
134.
135. Bearing plates:
Bearing plates are rectangular plates of mild steel or
cast iron used below F.F rails to distribute the load
on larger area of timber sleeper.
Advantages:
• To distribute the load coming on rails to the sleepers
over a larger area and to prevent skidding of the rail
in the soft wooden sleepers.
• Prevent the destruction of the sleeper due to
rubbing action of the rail.
• Adzing of sleeper can be avoided by bearing plates.