Networking

COMPUTER
NETWORK
CREATED BY:-
PALASH SACHAN

CONTENTS
INTRODUCTION
COMPUTER NETWORK
TYPES OF NETWORK
CLASSIFICATION OF NETWORK ARCHITECTURE
NETWORK TOPOLOGY

INTRODUCTION
 A computer network is a telecommunications network that allows
computers to exchange data.
 The physical connection between networked computing devices is
established using either cable media or wireless media.
 The best-known computer network is the internet.

COMPUTER NETWORK
 A collection of computing devices that are connected in various ways
in order to communicate and share resources.
 Usually, the connections between computers in a network are made
using physical wires or cables.
 However, some connections are wireless, using radio waves or
infrared signals.

TYPES OF NETWORK
 Based on the size and the coverage area, networks
are categorized into the following types:
Personal Area Networks (PANs)
Local Area Networks (LANs)
Metropolitan Area Networks (MANs)
Wide Area Networks (WANs)

PERSONAL AREA NETWORKS (PANs)
 A personal area network (PAN) is a computer network used for communication
among computer and different information technological devices close to one
person.
 Is a small network established for communication between different
devices, such as laptops, computers, mobiles, and PDAs.
 A pan may include wired and wireless devices.
 The reach of a pan typically extends to 10 meters.

LOCAL AREA NETWORK(LANs)
 A local area network (LAN) is a network that connects computers
and devices in a limited geographical area such as a home, school,
office building, or closely positioned group of buildings.
 Each computer or device on the network is a node.
 Wired LANs are most likely based on Ethernet technology.

(WAN)
It is relatively larger than LAN and extends across a city or a
metropolitan.
It is created by connecting two or more LANs located at
different locations in a city.

WIDE AREA NETWORK(WANs)
 A wide area network (WAN) is a computer network that covers a large
geographic area such as a city, country, or spans even intercontinental
distances.
 A WAN uses a communications channel that combines many types of media
such as telephone lines, cables, and air waves.
 A WAN often makes use of transmission facilities
provided by common carriers, such as telephone
companies.
 One of the most prominent examples of the
existing wans is the Internet.

CLASSIFICATION OF NETWORK
ARCHITECTURE
The architecture of a network is a logical design that
determines how the devices in the network communicate.
The commonly used architectures for computer networks are:
 Client-server architecture
 Peer-to-peer architecture
 Hybrid architecture

CLIENT-SERVER ARCHITECTURE
 On a network built using the client-server architecture, the
devices communicate to other devices through a central
computer referred to as a server.
 The server is a terminal with high processing power, which
provides services for the other computers on the network.
 The client is a terminal that accesses the resources available
on a server.

PEER-TO-PEER ARCHITECTURE
 On a network built using the peer-to-peer architecture, no specific
distinction exists between a client and a server.
 Any node can provide a service as well as send a request for a
service from another node on the network.
 The peer-to-peer network architecture allows sharing of resources,
data, and users.
 Each node on the network has full control over the network
resources.

HYBRID ARCHITECTURE
 A hybrid, in general, is a composition of two different types of
elements.
 A hybrid network architecture is created to get the benefits of
both, the peer-to-peer and the client-server architectures, in a
network.

NETWORK TOPOLOGY
 The pattern of interconnection of nodes in a network is called the Topology.
 This layout also determines the manner in which information is exchanged
within the network.
 The different types of network topologies that can be used to set up a
network are:
Bus Topology
Star Topology
Ring Topology
Mesh Topology
Tree Topology
Hybrid Topology

BUS TOPOLOGY
 Popular topology for data network.
 Single transmission medium onto which various nodes are
attached.
 Normally coaxial cable is used.
 Terminators at both end of BUS absorb signal, removing it
from BUS.

STAR TOPOLOGY
 The star topology connects nodes over a network using a central control unit called the
hub.
 You can easily add nodes to a star-based network by attaching the required nodes to the
hub.
 Setting up a star topology requires a lot of cabling because all
the nodes have to connect to the hub.

RING TOPOLOGY
 The ring topology connects the nodes on a network through a point-
to-point connection.
 Data is accepted from one neighboring node transmitted to other.
 Data travels in one direction.
 If one of the nodes on the network
stops, the entire network stops functioning.

MESH TOPOLOGY
 Each node is connected to more than one node.
 This provide an alternate route mechanism.
 Excellent for long distance networking.
 Supports back-up and rerouting.
 Used in large internetworking environments with stars, rings and
buses as nodes .

TREE TOPOLOGY
 The tree topology is created where the nodes are connected in a
hierarchical manner.
 In tree topology, the device at the root is referred to as the parent
for all the other nodes or devices in the network.
 The nodes below a parent node are referred
to as child nodes.

HYBRID TOPOLOGY
 The hybrid topology can be a combination of two or more basic
topologies, such as bus, ring, star, mesh, or tree.
 Hybrid networks combine more than two topologies, which, in
turn, enable you to get advantages of the constituent topologies.

Networking

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (19)

Similar to Networking

Similar to Networking (20)

Recently uploaded

Recently uploaded (20)

Networking