AGRICULTURE PROJECTS-EMBEDDED SYSTEM BASED GSM COMMUNICATION FOR AUTOMATIC IR...ASHOKKUMAR RAMAR
The document describes an embedded system for automatic irrigation control using GSM communication. The system uses sensors to monitor soil moisture and humidity levels. A microcontroller controls relays and motors to regulate water flow. Users can remotely control irrigation via SMS messages to a GSM module. This allows remote monitoring and control, saving water, electricity and labor while being economical to implement.
This document describes a student project to create a home automation control system using an RF remote control. It includes a cover page with the project title and student names. It also includes sections on an introduction, circuit diagram, the program used, component descriptions, the scope and uses of the project, and conclusions. The project uses an RF transmitter and receiver, microcontroller, TRIAC, and other components to allow controlling electrical loads like lights and appliances remotely via an RF remote control.
Bluetooth based home automation using arduino presentatonLalitKapoor7
This presentation outlines a Bluetooth-based home automation system using an Arduino Uno board. The system allows remote control of home appliances via an Android application. It uses an Arduino Uno microcontroller, HC-05 Bluetooth module, relays, and a relay driver. An Android app sends control signals over Bluetooth to the Arduino, which activates the relays to power devices. The presentation describes the hardware components, software, block diagram, advantages like remote monitoring, and a cost analysis. It aims to develop a low-cost home automation solution with remote control capabilities.
Case study on automatic washing machine based on Internet of Things(IOT)divyawani2
An automatic washing machine is an embedded system that provides home automation. It contains sensors like temperature and level sensors, actuators like a motor and pump, and a control unit. The control unit receives input from the sensors, controls the actuators, and provides a user interface through buttons and a display. It washes clothes by agitating them in water, pumping water in and draining it, and can select different settings like load size or wash cycle. Washing machines offer convenience but have some disadvantages like high cost and limited upgradability.
The document discusses the history and development of electronics from Thomas Edison's invention of the light bulb to modern integrated circuits and microprocessors. It then covers various applications of electronics in daily life and important topics in electronics like radio waves, transistors, and integrated circuits. Finally, it discusses future developments and opportunities in electronics.
BLUETOOTH CONTROL ROBOT WITH ANDROID APPLICATIONVarun Divekar
This document proposes designing a Bluetooth controlled robot that can be operated wirelessly via a smartphone. It discusses using an Arduino board connected to DC motors and a Bluetooth module to allow control of the robot's movement. A literature review covers previous work on Bluetooth communication systems for robot control. The objectives are to allow forward, reverse and turning control of the robot from a phone and transmit instructions wirelessly via Bluetooth. The methodology involves programming an Android app for control and analyzing the Bluetooth module connection.
This document describes a biometric attendance system project that uses fingerprint recognition. The system is comprised of an Arduino Uno microcontroller, fingerprint sensor module, XBee transceiver, and LCD display. It also includes information on the group members, introduction to biometrics, process control block, project requirements, descriptions of the hardware components, logical connections, and implementation including enrollment and attendance marking processes. The fingerprints and data are stored on a server computer connected via XBee transceivers and USB.
AGRICULTURE PROJECTS-EMBEDDED SYSTEM BASED GSM COMMUNICATION FOR AUTOMATIC IR...ASHOKKUMAR RAMAR
The document describes an embedded system for automatic irrigation control using GSM communication. The system uses sensors to monitor soil moisture and humidity levels. A microcontroller controls relays and motors to regulate water flow. Users can remotely control irrigation via SMS messages to a GSM module. This allows remote monitoring and control, saving water, electricity and labor while being economical to implement.
This document describes a student project to create a home automation control system using an RF remote control. It includes a cover page with the project title and student names. It also includes sections on an introduction, circuit diagram, the program used, component descriptions, the scope and uses of the project, and conclusions. The project uses an RF transmitter and receiver, microcontroller, TRIAC, and other components to allow controlling electrical loads like lights and appliances remotely via an RF remote control.
Bluetooth based home automation using arduino presentatonLalitKapoor7
This presentation outlines a Bluetooth-based home automation system using an Arduino Uno board. The system allows remote control of home appliances via an Android application. It uses an Arduino Uno microcontroller, HC-05 Bluetooth module, relays, and a relay driver. An Android app sends control signals over Bluetooth to the Arduino, which activates the relays to power devices. The presentation describes the hardware components, software, block diagram, advantages like remote monitoring, and a cost analysis. It aims to develop a low-cost home automation solution with remote control capabilities.
Case study on automatic washing machine based on Internet of Things(IOT)divyawani2
An automatic washing machine is an embedded system that provides home automation. It contains sensors like temperature and level sensors, actuators like a motor and pump, and a control unit. The control unit receives input from the sensors, controls the actuators, and provides a user interface through buttons and a display. It washes clothes by agitating them in water, pumping water in and draining it, and can select different settings like load size or wash cycle. Washing machines offer convenience but have some disadvantages like high cost and limited upgradability.
The document discusses the history and development of electronics from Thomas Edison's invention of the light bulb to modern integrated circuits and microprocessors. It then covers various applications of electronics in daily life and important topics in electronics like radio waves, transistors, and integrated circuits. Finally, it discusses future developments and opportunities in electronics.
BLUETOOTH CONTROL ROBOT WITH ANDROID APPLICATIONVarun Divekar
This document proposes designing a Bluetooth controlled robot that can be operated wirelessly via a smartphone. It discusses using an Arduino board connected to DC motors and a Bluetooth module to allow control of the robot's movement. A literature review covers previous work on Bluetooth communication systems for robot control. The objectives are to allow forward, reverse and turning control of the robot from a phone and transmit instructions wirelessly via Bluetooth. The methodology involves programming an Android app for control and analyzing the Bluetooth module connection.
This document describes a biometric attendance system project that uses fingerprint recognition. The system is comprised of an Arduino Uno microcontroller, fingerprint sensor module, XBee transceiver, and LCD display. It also includes information on the group members, introduction to biometrics, process control block, project requirements, descriptions of the hardware components, logical connections, and implementation including enrollment and attendance marking processes. The fingerprints and data are stored on a server computer connected via XBee transceivers and USB.
This document describes a password based door locking security system presented by four students. The system uses a microcontroller, keypad, LCD display, buzzer, DC motor, and other components. It allows a user to enter a password to open the door for security and can be used to secure doors, lockers, and other areas. The system was tested and provides advantages like automatic door opening and indication of unauthorized entry while being cost efficient.
Scope of electronics and communication engineering.pptRajesh Kumar
Electronics and communication engineering involves applying scientific principles to design, develop, fabricate, repair, and maintain electrical and electronic machines, instruments, and communication systems. It is a branch of engineering that deals with efficient communication. The scope of electronics and communication engineering includes emerging technologies like wireless communication, nanotechnology, embedded systems, wireless sensor networks, fiber optics, robotics, GPS, and more. It has applications across sectors like healthcare, transportation, defense, telecommunications and more. Electronics knowledge is essential for many engineering fields to function effectively.
This document discusses programmable logic controllers (PLCs). It provides a brief history of PLCs, describing their origins in the 1960s as replacements for relay logic systems. The document outlines the typical components of a PLC system, including the processor, memory unit, power supply, input/output modules, and programming device. It also describes ladder logic, a common programming language for PLCs using a logic diagram format. Finally, some applications of PLCs in industries like manufacturing and materials handling are listed.
A Programmable Logic Controller (PLC) is a digital computer used to control electromechanical processes in factories. PLCs were introduced in the late 1960s to replace relay-based control systems. The first commercial PLC was developed by Modicon for General Motors. Later, as microprocessors became available, PLCs evolved to be more sophisticated. A PLC has components like a power supply, input/output modules, a processor, and a programming device to control inputs from sensors and outputs to devices. PLCs can operate in harsh industrial environments and use simple ladder logic programming. A Programmable Automation Controller (PAC) is similar but designed for more complex automation with greater flexibility, memory, and control
Seminar Presentation on Programmeble Logic Controller , By an Engineering Student For doing Professional Presentation like Business Presentation, Industrial Use
SMART HOME AUTOMATION USING MOBILE APPLICATIONEklavya Sharma
This document outlines a smart home automation project using a mobile application to control home appliances via an Arduino board and Bluetooth module. The objectives are to understand smart home concepts, establish serial communication between Arduino and a mobile device, and design a user interface. The system allows controlling AC loads from an Android phone app through an Arduino, Bluetooth module, relays, and relay driver IC. A block diagram and flowchart illustrate the components and process. An App Inventor mobile app is created to provide the human-machine interface.
This document provides information about programmable logic controllers (PLCs). It discusses what a PLC is, its applications in machine control and process control, advantages like speed and cost effectiveness. It describes PLC types based on memory and I/O range. The core components of a PLC are described including the central processing unit, input/output modules, power supply and bus system. Programming standards for PLCs like IEC 61131-3 are also mentioned. Selection criteria for PLCs versus distributed control systems includes factors like cost, reliability, flexibility and standard compliance.
This document presents an Arduino-based home automation system using Bluetooth. It introduces the project, includes a block diagram, lists the hardware requirements, and describes the process for making a relay circuit. It explains the components used - Arduino UNO, Bluetooth module, relay, transistors and resistors. Software used is Arduino IDE. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. Future work proposes using Ethernet and WiFi for remote control from anywhere.
Arduino Based Home Automation System with Android andAnish Basu
This document describes an Arduino-based home automation system using Android and Bluetooth. The system allows controlling electrical devices like lights and appliances remotely using an Android app over Bluetooth. It consists of an Arduino Uno microcontroller, HC-05 Bluetooth module, sensors, relays and can automate devices based on sensor inputs. The Android app is developed using MIT App Inventor and communicates with the Arduino over Bluetooth to send control signals. The system provides benefits like security, energy efficiency and convenience.
This document outlines a project to develop a home automation system using a Node MCU board that can be remotely controlled from an Android smartphone. The system allows users to control electrical appliances and switches in their home from their phone. It provides a modern solution for home automation that makes it easier for users to control devices anywhere in their home. The key components outlined are the Node MCU, relays, batteries, LED bulbs, Arduino IDE, ESP8266 library, Blynk libraries, and Blynk app. It provides step-by-step instructions on setting up the circuit, configuring the software, uploading code, and testing the system.
PLC(Programmable Logic Controller)-Control system Engineering.Tahmid Rongon
PLC(Programmable Logic Controller)
Programmable Logic Controller (PLC) is an industrial computer that monitors inputs, makes decisions based on its program and controls outputs to automate a process or machine.
The automation of many different processes , such as controlling machines or factory assembly lines, is done through the use of small computers called a programmable logic controllers(PLCs).
This document provides an overview of home automation. It defines home automation as the automatic control of household appliances, security systems, lighting, and HVAC systems using electronic devices and software. The document discusses why home automation is useful by allowing for remote and seamless control of home functions from devices like smartphones. It then describes how home automation works using sensors, controllers, and actuators connected to devices like cameras, motion detectors, temperature sensors, and Arduino boards. The document outlines some common components of home automation systems like Bluetooth modules, microcontrollers, relays, and Android apps. It lists advantages like savings, safety, and convenience and gives examples of applications such as smart kitchens, security systems, health monitoring, and irrigation control
This document describes a group project to design a robotic vehicle that can follow a black line and perform a 180 degree turn when detecting an obstacle. The robot uses a PIC18F4520 microcontroller board along with stepper motors, optical sensors, and a proximity sensor. The objectives were to get the stepper motors moving in the correct directions based on sensor input and turn 180 degrees upon obstacle detection from 15 cm away. The hardware and software designs are outlined, including assigning stepping sequences to the motors. Implementation and testing were completed with some challenges along the way.
A Report on Bidirectional Visitor Counter using IR sensors and Arduino Uno R3Abhishekvb
The aim of our project is to make a controller which can sense if any person enters the room and it lights up the room automatically and also counts how many person are entering the room or going out of it.
Power point presentation on Industrial AutomationJaiPrakash337
This document summarizes a seminar presentation on industrial automation. It discusses automation tools like PLCs and SCADA used to automate industrial processes. It defines automation and describes the advantages it provides like improved accuracy, reduced costs, and increased production. PLCs are described as programmable devices that can automate industrial tasks by reading sensor inputs, running user-defined logic, and controlling outputs. SCADA systems allow remote monitoring and control of distributed industrial processes. The document outlines the components and applications of PLCs and SCADA and concludes that combining them provides an effective way to safely operate and monitor industrial machines.
This document discusses interfacing a relay with an 8051 microcontroller. It defines a relay as a switch that can be controlled by a low-power signal to switch high-power circuits. It provides a diagram showing how an 8051 port pin can provide control signals to drive a transistor and energize a relay coil to open and close the main relay switch. It also gives examples of assembly and C code to output high and low signals from a port pin to toggle a relay on and off.
This document presents a presentation on home automation by Burungale Dhanaji Shivaji. It discusses designing a home automation system using an ARM7 controller that allows controlling home appliances wirelessly via switch, Wi-Fi, or GSM. The system aims to provide effective and efficient control of devices to help elderly or disabled people. It presents the objectives, scope, relevance, block diagram, software/language used, sequence diagrams, and conclusions regarding developing a low-cost, high-performance home automation system that allows easy user interaction through an Android phone.
This document contains the resume of Lukmanur Hakim Bin Amzah, who is pursuing a Bachelor of Engineering in Electrical Engineering from Universiti Teknologi Malaysia. He has work experience as an intern and technician in electrical departments. He is seeking an electrical engineering position to apply his technical skills and knowledge. His academic qualifications include a Diploma in Electrical Engineering and good grades in his Sijil Pelajaran Malaysia examinations. He has strong skills in software like MATLAB and programming languages.
Syed Abdullah Medni is seeking a career as an electrical or electronic engineer. He has a B.Eng in Electrical and Electronic Engineering from Asia Pacific University and Staffordshire University. He has over 4 years of work experience in Saudi Arabia providing technical support and managing AV, ELV and HV systems for the Ministry of Economy and Planning and as a system engineer for Jawraa, an ICT solutions provider. He also has experience in Malaysia working for Tenaga Nasional Berhad in planning, construction, maintenance and customer service roles and as an engineering technical assistant at Asia Pacific University. He has received several awards for engineering projects and has participated in workshops and competitions.
This document describes a password based door locking security system presented by four students. The system uses a microcontroller, keypad, LCD display, buzzer, DC motor, and other components. It allows a user to enter a password to open the door for security and can be used to secure doors, lockers, and other areas. The system was tested and provides advantages like automatic door opening and indication of unauthorized entry while being cost efficient.
Scope of electronics and communication engineering.pptRajesh Kumar
Electronics and communication engineering involves applying scientific principles to design, develop, fabricate, repair, and maintain electrical and electronic machines, instruments, and communication systems. It is a branch of engineering that deals with efficient communication. The scope of electronics and communication engineering includes emerging technologies like wireless communication, nanotechnology, embedded systems, wireless sensor networks, fiber optics, robotics, GPS, and more. It has applications across sectors like healthcare, transportation, defense, telecommunications and more. Electronics knowledge is essential for many engineering fields to function effectively.
This document discusses programmable logic controllers (PLCs). It provides a brief history of PLCs, describing their origins in the 1960s as replacements for relay logic systems. The document outlines the typical components of a PLC system, including the processor, memory unit, power supply, input/output modules, and programming device. It also describes ladder logic, a common programming language for PLCs using a logic diagram format. Finally, some applications of PLCs in industries like manufacturing and materials handling are listed.
A Programmable Logic Controller (PLC) is a digital computer used to control electromechanical processes in factories. PLCs were introduced in the late 1960s to replace relay-based control systems. The first commercial PLC was developed by Modicon for General Motors. Later, as microprocessors became available, PLCs evolved to be more sophisticated. A PLC has components like a power supply, input/output modules, a processor, and a programming device to control inputs from sensors and outputs to devices. PLCs can operate in harsh industrial environments and use simple ladder logic programming. A Programmable Automation Controller (PAC) is similar but designed for more complex automation with greater flexibility, memory, and control
Seminar Presentation on Programmeble Logic Controller , By an Engineering Student For doing Professional Presentation like Business Presentation, Industrial Use
SMART HOME AUTOMATION USING MOBILE APPLICATIONEklavya Sharma
This document outlines a smart home automation project using a mobile application to control home appliances via an Arduino board and Bluetooth module. The objectives are to understand smart home concepts, establish serial communication between Arduino and a mobile device, and design a user interface. The system allows controlling AC loads from an Android phone app through an Arduino, Bluetooth module, relays, and relay driver IC. A block diagram and flowchart illustrate the components and process. An App Inventor mobile app is created to provide the human-machine interface.
This document provides information about programmable logic controllers (PLCs). It discusses what a PLC is, its applications in machine control and process control, advantages like speed and cost effectiveness. It describes PLC types based on memory and I/O range. The core components of a PLC are described including the central processing unit, input/output modules, power supply and bus system. Programming standards for PLCs like IEC 61131-3 are also mentioned. Selection criteria for PLCs versus distributed control systems includes factors like cost, reliability, flexibility and standard compliance.
This document presents an Arduino-based home automation system using Bluetooth. It introduces the project, includes a block diagram, lists the hardware requirements, and describes the process for making a relay circuit. It explains the components used - Arduino UNO, Bluetooth module, relay, transistors and resistors. Software used is Arduino IDE. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. Future work proposes using Ethernet and WiFi for remote control from anywhere.
Arduino Based Home Automation System with Android andAnish Basu
This document describes an Arduino-based home automation system using Android and Bluetooth. The system allows controlling electrical devices like lights and appliances remotely using an Android app over Bluetooth. It consists of an Arduino Uno microcontroller, HC-05 Bluetooth module, sensors, relays and can automate devices based on sensor inputs. The Android app is developed using MIT App Inventor and communicates with the Arduino over Bluetooth to send control signals. The system provides benefits like security, energy efficiency and convenience.
This document outlines a project to develop a home automation system using a Node MCU board that can be remotely controlled from an Android smartphone. The system allows users to control electrical appliances and switches in their home from their phone. It provides a modern solution for home automation that makes it easier for users to control devices anywhere in their home. The key components outlined are the Node MCU, relays, batteries, LED bulbs, Arduino IDE, ESP8266 library, Blynk libraries, and Blynk app. It provides step-by-step instructions on setting up the circuit, configuring the software, uploading code, and testing the system.
PLC(Programmable Logic Controller)-Control system Engineering.Tahmid Rongon
PLC(Programmable Logic Controller)
Programmable Logic Controller (PLC) is an industrial computer that monitors inputs, makes decisions based on its program and controls outputs to automate a process or machine.
The automation of many different processes , such as controlling machines or factory assembly lines, is done through the use of small computers called a programmable logic controllers(PLCs).
This document provides an overview of home automation. It defines home automation as the automatic control of household appliances, security systems, lighting, and HVAC systems using electronic devices and software. The document discusses why home automation is useful by allowing for remote and seamless control of home functions from devices like smartphones. It then describes how home automation works using sensors, controllers, and actuators connected to devices like cameras, motion detectors, temperature sensors, and Arduino boards. The document outlines some common components of home automation systems like Bluetooth modules, microcontrollers, relays, and Android apps. It lists advantages like savings, safety, and convenience and gives examples of applications such as smart kitchens, security systems, health monitoring, and irrigation control
This document describes a group project to design a robotic vehicle that can follow a black line and perform a 180 degree turn when detecting an obstacle. The robot uses a PIC18F4520 microcontroller board along with stepper motors, optical sensors, and a proximity sensor. The objectives were to get the stepper motors moving in the correct directions based on sensor input and turn 180 degrees upon obstacle detection from 15 cm away. The hardware and software designs are outlined, including assigning stepping sequences to the motors. Implementation and testing were completed with some challenges along the way.
A Report on Bidirectional Visitor Counter using IR sensors and Arduino Uno R3Abhishekvb
The aim of our project is to make a controller which can sense if any person enters the room and it lights up the room automatically and also counts how many person are entering the room or going out of it.
Power point presentation on Industrial AutomationJaiPrakash337
This document summarizes a seminar presentation on industrial automation. It discusses automation tools like PLCs and SCADA used to automate industrial processes. It defines automation and describes the advantages it provides like improved accuracy, reduced costs, and increased production. PLCs are described as programmable devices that can automate industrial tasks by reading sensor inputs, running user-defined logic, and controlling outputs. SCADA systems allow remote monitoring and control of distributed industrial processes. The document outlines the components and applications of PLCs and SCADA and concludes that combining them provides an effective way to safely operate and monitor industrial machines.
This document discusses interfacing a relay with an 8051 microcontroller. It defines a relay as a switch that can be controlled by a low-power signal to switch high-power circuits. It provides a diagram showing how an 8051 port pin can provide control signals to drive a transistor and energize a relay coil to open and close the main relay switch. It also gives examples of assembly and C code to output high and low signals from a port pin to toggle a relay on and off.
This document presents a presentation on home automation by Burungale Dhanaji Shivaji. It discusses designing a home automation system using an ARM7 controller that allows controlling home appliances wirelessly via switch, Wi-Fi, or GSM. The system aims to provide effective and efficient control of devices to help elderly or disabled people. It presents the objectives, scope, relevance, block diagram, software/language used, sequence diagrams, and conclusions regarding developing a low-cost, high-performance home automation system that allows easy user interaction through an Android phone.
This document contains the resume of Lukmanur Hakim Bin Amzah, who is pursuing a Bachelor of Engineering in Electrical Engineering from Universiti Teknologi Malaysia. He has work experience as an intern and technician in electrical departments. He is seeking an electrical engineering position to apply his technical skills and knowledge. His academic qualifications include a Diploma in Electrical Engineering and good grades in his Sijil Pelajaran Malaysia examinations. He has strong skills in software like MATLAB and programming languages.
Syed Abdullah Medni is seeking a career as an electrical or electronic engineer. He has a B.Eng in Electrical and Electronic Engineering from Asia Pacific University and Staffordshire University. He has over 4 years of work experience in Saudi Arabia providing technical support and managing AV, ELV and HV systems for the Ministry of Economy and Planning and as a system engineer for Jawraa, an ICT solutions provider. He also has experience in Malaysia working for Tenaga Nasional Berhad in planning, construction, maintenance and customer service roles and as an engineering technical assistant at Asia Pacific University. He has received several awards for engineering projects and has participated in workshops and competitions.
FKE_ahmad nor sherfiq bin sherimim_JOB CURRICULUM VITAEAhmad nor sherfiq
1. Ahmad Nor Sherfiq bin Sherimim is a 24-year-old Malaysian electrical engineering graduate seeking a position as an electrical instrumentation and control engineer.
2. He has a Bachelor's Degree in Electrical Engineering from Universiti Teknologi Malaysia with a CGPA of 3.39 and was on the Dean's List for several semesters.
3. His qualifications include professional registration as a Graduate Engineer with the Board of Engineers Malaysia and experience in internships at PETRONAS MLNG and Transwater.
Amar Gadve is seeking a position to enhance his engineering skills through teamwork. He has a Bachelor's degree in Electronics and Telecommunication with over 10 years of experience in testing, maintenance, project management, and technical support roles. His areas of expertise include automation, networking, and hardware testing. He has participated in several technical competitions and workshops during his academic career.
This document contains the resume of A. Mohammed Ovaiz. It summarizes his educational qualifications, professional experience, skills, publications, and additional qualifications. Some key details include:
- He has a M.E. in Power Electronics and Drives with 6 years of teaching experience and 3 years of experience in power sector operations and maintenance.
- He is currently working as an Assistant Professor and has taught subjects related to electrical engineering, power systems, and drives.
- He has published 8 papers in international journals and presented in 3 conferences on topics related to power systems and control systems.
- He is proficient in software like MATLAB, LabVIEW and has experience in programming languages like C/C++.
This document contains a resume for Nurul Hidayah Binti Harun. It includes her contact information, objective, skills, work experience as a tele-sales engineer, internship experience, education including a Bachelor's degree in Electrical Engineering from Universiti Tun Hussein Onn Malaysia, languages, extracurricular activities, and reference.
I'd been assigned as a field service engineer on-site at Institut Jantung Negara (IJN). I'm responsible for maintaining all Philips imaging system available in IJN including Interventional Xray (IXR), Diagnostic Xray (DXR), and Ultrasound system. My task is to sustain a good relationship with IJN staffs in order to deliver the best customer service experience. I also have to complete all preventive maintenance (PM) in order to ensure all Philips installed base working well accordance to the manufacturer’s specification. Other than that, response for system breakdown and corrective maintenance (CM) within the central region is one of my main responsibility. Sometime, I required to escalate any issue regarding the patient safety and machine faulty to the Customer Call Centre (CCC). I also involved in installations for several angiogram system within Peninsular Malaysia and give support to other Philips engineer when extra hand is needed on field.
Mohammed Safeeq seeks a challenging position as an engineer. He has a B.E. in Electrical and Electronics Engineering from Arunai Engineering College with a CGPA of 7.79. He has work experience as a Supervisor at Rock Field Industries. His skills include AutoCAD, MATLAB, C/C++, MS Office, and he has participated in workshops, paper presentations, and conferences. He served as President of the Society of Electrical and Electronics Engineering at his college.
1) Ahmad Nusir is applying for a graduate engineer position and will graduate from university in January 2017 with a Bachelor's degree in electronic engineering.
2) He completed a 3-month internship as a maintenance engineer where he gained experience in electrical engineering tasks.
3) For his final year project, he developed a technical module to upgrade a PLC monitoring system to use an industrial network according to automation standards.
Siti Hawa binti Azman is seeking an engineering, research, or communications position. She has a Bachelor's degree in Electronic Instrumentation from UiTM and diploma in Electrical Engineering. Her work experience includes positions at Negeri Sembilan Skill Development Centre, Hokuden Sdn Bhd, and Fujitsu Component Malaysia Sdn. Bhd. She is proficient in English, Malay, AutoCAD, programming, and Microsoft Office. Her final year project involved using SIFT for capacitor recognition in cluttered images.
This document contains a resume for Abhijit Kumar Pandia. It summarizes his contact information, career objective, educational qualifications, technical skills, projects, extracurricular activities and personal details. His highest educational qualification is a B.Tech in Electrical Engineering. He has skills in areas like AC and DC components, power distribution, house wiring and renewable energy. One of his projects involved designing a solar street light. He has participated in various technical workshops and seminars. His personal details include his date of birth, marital status and interests.
Sandeep Dubey is seeking a challenging opportunity as an electrical engineer to use his technical and communication skills. He has over 3 years of experience working as a service engineer for Step By Step Automation, an authorized channel partner for Mitsubishi Electric and Yaskawa. In this role, he has worked on PLC, HMI, VFD installation, wiring and programming. He has a Bachelor's degree in Electrical Engineering from IEC College of Engineering & Technology with 67% marks. He is proficient in English, Hindi, PLC programming, SCADA, industrial automation, and process instrumentation.
M. Mayilsamy is seeking a position that allows him to apply his knowledge of automation systems. He has a M.E. in Power Electronics and Drives from PSNA College of Engineering and over 2 years of teaching experience. He is proficient in programming languages like C and C++, and tools including MATLAB, SIMULINK, and LABVIEW. His areas of interest involve wind energy conversion, industrial instrumentation, and power electronics.
My Expertise is not only in Electrical Engineering Fields but also in Education and Academic Means.. I also teach the FF subjects Specialization:
Engineering Sciences
Electrical Engineering Professional Subjects
Higher Mathematics
-Differential Equation's
-Advanced Engineering Mathematics
-Differential & Integral Calculus
-Analytic Geometry
-Algebra
-Trigonometry
-Solid Mensuration
-Advanced Algebra
General Physics
-Thermodynamics
-Static of Rigid Bodies
-Dynamics of Deformable Bodies
-Strength of Materials
-Fluid Mechanics
-Electromagnetics
-Electronics
and ETC...…..
-
Ramli Bin Abdul Wahab is a 30-year-old Malaysian male seeking a position in industrial technologies. He holds a Bachelor's degree in Microelectronic Engineering from University Malaysia Perlis. He has over 10 years of work experience in electronics repair and maintenance, including his current role as a Senior Technician at Vas Aero Malaysia. He is proficient in various electronics and programming skills.
Praveen Kumar is pursuing an M.Tech in Electronics and Communication at IIT(ISM) Dhanbad. He completed his B.Tech in Electronics and Communication Engineering from Institute of Engineering & Technology, M. J. P. Rohilkhand University with a DGPA of 7.35/10. He has work experience in networking, mobile technology, and embedded systems. His areas of expertise include C, C++, VHDL, embedded systems, MATLAB, and Microsoft Office. He has published research papers and participated in various projects, competitions, and volunteer activities.
Nakul P C provides a resume summarizing his personal and educational background, technical skills, projects, workshops conducted, activities, and achievements. He has a BTech in Electronics and Communication Engineering from National Institute of Technology, Calicut expected in 2017 with a CGPA of 7.98/10. His areas of expertise include digital and analog VLSI circuits, embedded systems, and wireless communication. Notable projects include implementing visible light communication using MSP430, developing an IC trainer kit with various interfaces, and hardware implementation of a 7,4 Hamming code. He has conducted several workshops and served as vice chairman of the IEEE NIT Calicut Student Branch.
This curriculum vitae is for Yalla Chandrasekhar, an electrical and electronics engineering lecturer born in 1987 in India. Chandrasekhar has a Master's degree in power electronics and a Bachelor's degree in electrical and electronics engineering. He has over 1 year of work experience as a lecturer in electrical and electronics engineering. His areas of expertise include power electronics, power systems, and electrical machines.
Mahmoud Ahmed Mokhtar Mosaad El Sallam is an electrical engineer from Egypt seeking a challenging position. He has a bachelor's degree in electrical engineering and a pre-master's degree in generation and utilization of electrical energy. He has experience working in electrical distribution, protection systems, and power generation through internships and training courses. His skills include Microsoft Office, electrical design, distribution systems, protection devices, and he is proficient in English and Arabic.
This document contains a resume for Ahsan Shaukat, an engineer from Lahore, Pakistan. It outlines his education history including a BS in electrical engineering and DAE in electronics. It lists his work experience as an electrical inspection surveyor, teacher, and PLC operator. It also includes his skills, training, and professional attributes.
Online train ticket booking system project.pdfKamal Acharya
Rail transport is one of the important modes of transport in India. Now a days we
see that there are railways that are present for the long as well as short distance
travelling which makes the life of the people easier. When compared to other
means of transport, a railway is the cheapest means of transport. The maintenance
of the railway database also plays a major role in the smooth running of this
system. The Online Train Ticket Management System will help in reserving the
tickets of the railways to travel from a particular source to the destination.
An In-Depth Exploration of Natural Language Processing: Evolution, Applicatio...DharmaBanothu
Natural language processing (NLP) has
recently garnered significant interest for the
computational representation and analysis of human
language. Its applications span multiple domains such
as machine translation, email spam detection,
information extraction, summarization, healthcare,
and question answering. This paper first delineates
four phases by examining various levels of NLP and
components of Natural Language Generation,
followed by a review of the history and progression of
NLP. Subsequently, we delve into the current state of
the art by presenting diverse NLP applications,
contemporary trends, and challenges. Finally, we
discuss some available datasets, models, and
evaluation metrics in NLP.
Covid Management System Project Report.pdfKamal Acharya
CoVID-19 sprang up in Wuhan China in November 2019 and was declared a pandemic by the in January 2020 World Health Organization (WHO). Like the Spanish flu of 1918 that claimed millions of lives, the COVID-19 has caused the demise of thousands with China, Italy, Spain, USA and India having the highest statistics on infection and mortality rates. Regardless of existing sophisticated technologies and medical science, the spread has continued to surge high. With this COVID-19 Management System, organizations can respond virtually to the COVID-19 pandemic and protect, educate and care for citizens in the community in a quick and effective manner. This comprehensive solution not only helps in containing the virus but also proactively empowers both citizens and care providers to minimize the spread of the virus through targeted strategies and education.
1. Phone : +6017-7503744 Email : mohamadkhaizat@gmail.com
OBJECTIVE
Currently in final semester (Expected time to graduate and finish study
in June 2019) and would like to apply for a position that will allow me
to utilize my expertise in the field of electrical/electronic engineering
and implement my innovative ideas and creative mind towards the
area of specialization.
EDUCATION
Bachelor’s Degree in Electrical Engineering (Electrical) major in
Electronics Drive and Application
Universiti Teknologi Malaysia Johor Bahru
SEPTEMBER 2016 – JUNE 2019
CURRENT CGPA : 3.58 (Dean’s list)
Diploma in Electronic Engineering
Universiti Teknologi Malaysia Kuala Lumpur
JUNE 2013 – JUNE 2016
CGPA : 3.61 (Dean’s list)
EXPERIENCE
Internship | DENSO (M) Sdn. Bhd, Bandar Baru Bangi, Selangor
Department : Device Electronic
NOV 2015 – APRIL 2016 (20 Weeks)
The industry posting exposed me production processes of a chip in the
clean room, including the packaging of the product. There was also
the opportunity to acquire designing skills as I worked on a mechanical
part (checking jig) and a Programmable Logic Controller (PLC).
As part of the manufacturing team, I learned the critical skills of
communication, collaboration and problem-solving with other team
members during the posting.
LEADERSHIP
Student Representative Council (MPP) of Universiti Teknologi Malaysia
(UTM) in Department of Sports and Culture since 2014-2015.
FINAL YEAR PROJECT (FYP)
Classification: FYP in Power Electronics Drives and Applications
Title: Inverter Design using Unipolar Pulse Width Modulation (PWM)
Design a prototype 45 W DC/AC power inverter that can be plugged by
using car battery as a power supply. This FYP has two parts which are
simulation and hardware part. MATLAB, Proteus 8 and Express PCB
software were used to run the circuit simulation and hardware
part in the PCB circuit.
PROFILE
Name
Mohamad Khaizat Bin Mohd
Khir
Date of Birth
1st
June 1995
Address
40, Jalan Putra,
1/50 Bandar Putra,
85000 Segamat, Johor.
Phone
+6017-7503744
Email
mohamadkhaizat@gmail.com
Linkedin URL
www.linkedin.com/in/moham
ad-khaizat
References
Dr Mohd Rodhi Bin Sahid
Academic Advisor/Lecturer,
Faculty of Electrical
Engineering,
Universiti Teknologi Malaysia.
Email: rodhi@fke.utm.my
Tel: +6019-7304469
2. Phone : +6017-7503744 Email : mohamadkhaizat@gmail.com
CORE SKILLS AND TECHNICAL SKILLS
CORE SKILLS
1) Time management and Communication
Good in time management and communication as
I was a Student Representative Council (MPP) and
a Dean’s list student at the same time during my
studies.
2) Discipline and Teamwork
Able to work in many areas of work and enjoyed
working with the interdisciplinary team and
families.
3) Accountable and Independent
Able to work under minimum supervision and
willing to work anywhere in Malaysia.
TECHNICAL SKILLS
Software and Platforms
Matlab, Proteus 8, Arduino, Firebase, Thunkable X,
Google Spreadsheet, Atmel, C++ Programming,
Quartus II, Microsoft Office, Google Drive.
Hardware
Familiar to any hardware that is related to Power
Electronics component and also High Voltage
component.
ADDITIONAL INFO
Courses and Subjects Taken:
- Power Electronics and Drives
- Industrial Electronic
- Industrial Automation and Robotic
- Microprocessor
- Programmable Logic Controller (PLC)
- Electric Machines
- Control System Design
- Signal and System
- Sustainable Energy
- Power System Control and SCADA System
- Power System Analysis
- High Voltage Technology
- High Voltage Test and Calibration
CO-CURRICULUM ACTIVITIES
Facilitator Leader of Community Engagement
@Bengkalis Indonesia (April 2017)
International program between Malaysia and
Indonesia that focuses on poor people (especially
Muallaf) in Indonesia involving UTM students,
Bengkalis Polytechnic and Villagers of Bengkalis.
Facilitator of Evolt Open Day (September 2017)
Introduce new students about the advantages and
the importance of Electric Vehicle in future.
Almost 120 students were involved in this event.
Director of Festival Sports and Culture FESC’15
(November 2015)
Sports event for all of the courses in UTM and
almost one thousand students in UTM KL were
involved in this event.
Facilitator of Students Orientation of UTM
(June 2016)
Every year program for new students in UTM and
the participation of this program is a must for
every new students to attend.