Ccna1v31 mod06

This document is a PowerPoint presentation about networking media for the CCNA 1 v3.1 Module 3. It includes slides on different types of networking cable such as coaxial cable, twisted pair cable and fiber optic cable. It also covers wireless networking concepts such as wireless standards, network components like access points, and wireless security. The presentation is intended for instructors as a template that can be modified for their classes.

Ccna1v31 mod02

This document is a PowerPoint presentation about networking fundamentals and concepts such as network history, devices, topologies, protocols, and models including OSI and TCP/IP. It provides information on different types of networks including LANs, WANs, MANs, and SANs. The presentation also covers topics such as bandwidth measurements, digital versus analog, peer-to-peer communication, and encapsulation. The purpose is to present the key concepts and targets for a CCNA networking module through slides with descriptive text and diagrams.

Ccna1v31 mod04

This document is a PowerPoint presentation about cable testing for CCNA 1 v3.1 Module 4. It provides an overview of topics like waves, exponents and logarithms, decibels, analog and digital signals, bandwidth, signaling over copper and fiber, attenuation and insertion loss, sources of noise, crosstalk, cable testing standards, and testing optical fiber. The presentation notes that a quality cable tester for Cat5e cabling is the Fluke DSP-LIA013 Channel/Traffic Adapter.

Ccna1v31 mod07

This document is a PowerPoint presentation about Ethernet technologies that was created for instructors to modify for their own use. It covers the history and standards of Ethernet, including the parameters and implementations of 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps Ethernet. The presentation provides information on Ethernet frames, encoding methods, cable types, and maximum distances for different Ethernet architectures. It concludes with a discussion of the expanding scope and future of Ethernet networking.

Cisco CCNA module 3

Cisco CCNA module 8

This document discusses Ethernet switching and how switches work to segment collision domains to improve network performance. It explains that switches divide the network into smaller collision domains by learning MAC addresses and directing traffic only to relevant ports. This reduces bandwidth-limiting broadcast traffic and allows for full-duplex communication between connected devices without collisions. The document also covers spanning tree protocol, switch operation modes, and how routers further segment broadcast domains.

Cisco CCNA module 5

This document discusses cabling for LANs and WANs. It covers topics like Ethernet cabling and connectors used in campus networks, the use of UTP cable for implementing Ethernet, and networking devices like repeaters, hubs, bridges, and switches. The document also discusses WAN connectivity using serial connections, ISDN, DSL, and the role of routers in providing connectivity within the LAN and to the WAN.

The document discusses the evolution of Ethernet technologies over time, from the original 10 Mbps Ethernet standard to faster standards such as Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet. It describes the key characteristics of each technology, including the types of media used (e.g. coaxial cable, fiber optic cable), encoding methods employed, and typical maximum transmission distances. The document suggests that while copper and wireless technologies may soon reach their speed limitations, fiber optic connections still have enormous potential bandwidth and will continue enabling faster Ethernet standards in the future.

scale network

miransaeed

This document discusses link aggregation and EtherChannel technologies. It explains that link aggregation allows combining multiple physical links into logical links to improve performance and redundancy. EtherChannel is a common method of link aggregation that load balances traffic across physical links. The document provides instructions on configuring EtherChannel and verifying the link aggregation, including checking the status of EtherChannel interfaces and troubleshooting any issues.

Chapter 4 Network Access

newbie2019

CCNA Discovery 3 - Chapter 7

The document discusses different wide area network (WAN) connectivity options and configurations. It describes common WAN technologies like circuit switching, packet switching, and cell switching. It also covers different WAN encapsulation methods, specifically HDLC and PPP. Features of PPP like authentication and compression are outlined. Finally, the document defines Frame Relay, describing its use of virtual circuits, DLCIs, and traffic management techniques.

CCNA Discovery 3 - Chapter 4

This document discusses addressing in an enterprise network. It covers hierarchical IP addressing structures using subnetting to divide networks. Variable length subnet masking (VLSM) allows flexible subnet sizes. Classless routing and CIDR use network prefixes instead of classful routing. Network address translation (NAT) translates private addresses to public addresses, and port address translation (PAT) maps multiple private addresses to one public address.

CCNA Discovery 3 - Chapter 5

The document discusses routing protocols for enterprise networks, comparing flat networks to hierarchical topologies. It covers configuring networks using RIP, a distance vector protocol, and EIGRP, Cisco's proprietary protocol. Key topics include building routing tables, static versus dynamic routing, RIP and EIGRP metrics and operation, and designing networks using EIGRP features like summarization.

Cs348 lec8-error detection-2011

The document discusses various techniques for error detection in computer networks, including parity checks, checksums, and cyclic redundancy checks (CRCs). CRCs are powerful error detecting codes that work by dividing the message and redundancy bits by a generator polynomial. The CRC is calculated by finding the remainder of the division and appending it to the message before transmission. The receiver can detect errors by checking if the remainder is zero after dividing the received bits by the same generator polynomial. CRCs can detect all single-bit errors and most error patterns.

Flow Control

selvakumar_b1985

Flow control specifies how much data a sender can transmit before receiving permission to continue. There are two main types of flow control: stop-and-wait and sliding window. Stop-and-wait allows transmission of one frame at a time, while sliding window allows transmitting multiple frames before needing acknowledgement. Sliding window flow control uses variables like window size, last ACK received, and last frame sent to determine how transmission proceeds. It provides more efficiency than stop-and-wait. Automatic repeat request (ARQ) handles retransmission of lost or damaged frames through timeouts, negative acknowledgements, or cumulative acknowledgements depending on the specific ARQ protocol used.

$Hs303 sadfs@sad..asd:[[\][$ $Hs303 sadfs@sad..asd:[[\][$

Hs303 sadfs@sad..asd:[[\][

Hs303

$Hs303 sadfs@sad..asd:\][$ $Hs303 sadfs@sad..asd:\][$

Hs303 sadfs@sad..asd:\][

32 Ways a Digital Marketing Consultant Can Help Grow Your Business

Barry Feldman

Ccna1v31 mod09

Ccna1v31 mod01

This PowerPoint presentation covers the key topics in CCNA 1 v3.1 Module 1 including PC basics, network interface cards, TCP/IP configuration, binary and hexadecimal number systems, IP addressing, and networking troubleshooting. It was created for instructors to modify for their classes and provides the target indicators for the module. The presentation instructs users to report any errors found and lists resources for additional instructional materials.

Ccna1v31 mod11

Universitas Teknokrat Indonesia

This PowerPoint presentation covers the TCP/IP transport and application layers from CCNA 1 v3.1 Module 11. It includes slides on topics like transport layer analogies, flow control, multiplexing, establishing connections, session maintenance, the three-way handshake, TCP sliding windows, TCP segments, UDP segments, port numbers, FTP, URLs, email messaging, SNMP, and Telnet. The presentation is intended for instructors to modify for their own use, and not as a study guide for assessments.

Ccna1v3.1 mod02

This PowerPoint presentation covers networking fundamentals and concepts including network history, devices, topologies, protocols, LANs, WANs, MANs, storage networks, VPNs, bandwidth, digital transfer, OSI and TCP/IP models, encapsulation, and data naming at each layer. It is intended for instructors to modify for their classes and provides objectives and content for the CCNA 1 v3.1 Module 2 on networking fundamentals.

Ccna1v3.1 mod02

Karthick Bala

Ccna1v31 mod01

Agus Junam

This PowerPoint presentation covers the key topics and objectives for the CCNA 1 v3.1 Module 1 on introduction to networking. It provides instructions for instructors to locate instructional resources and includes slides on PC basics, network interface cards, TCP/IP configuration, IP addressing, binary and hexadecimal number systems, and networking troubleshooting. The presentation is intended for instructors to modify for their own use in teaching the module and is not a study guide for assessments.

Cisco

Irvan F Panjaitan

This PowerPoint presentation covers the key topics and objectives for the CCNA 1 v3.1 Module 1 on introduction to networking. It provides instructions for instructors to locate additional teaching resources and includes slides on topics like PC basics, network interface cards, TCP/IP configuration, IP addressing, binary and hexadecimal number systems. The presentation is intended as a template for instructors to modify for their own use in teaching the module, and is not a study guide for assessments.

Ccna

Sithu PM

This document contains summaries of networking fundamentals topics such as network history, devices, topologies, protocols, and models like OSI and TCP/IP. It discusses different types of networks including LANs, WANs, MANs, and VPNs. It also covers related concepts such as bandwidth measurements, digital transfer calculations, encapsulation, and the names for data at each layer of the networking models. The document is made up of multiple sections copyrighted by Cisco Systems from their CCNA 1 curriculum on networking fundamentals.

CCNA RS_NB - Chapter 3

United International University

This document summarizes a chapter about network protocols and communications. It discusses how protocols establish communication rules and standards organizations develop protocols through processes like RFCs. It also describes how data is encapsulated when moving through networks and OSI and TCP/IP models for conceptualizing network layers. Specific topics covered include protocol suites, addressing, data encapsulation, accessing local and remote network resources, and standards bodies.

Ccna routing and_switching_chapter-4-5

The document discusses networking concepts related to the physical and data link layers. It covers topics like physical layer protocols, Ethernet, cabling types (copper, fiber, wireless), network access methods, data link frames and addresses, and protocols like ARP. The presentation is intended to help students learn objectives for chapters 4 and 5 on network access, Ethernet, and related lower layer concepts.

What's hot

Cisco CCNA module 7

scale network

miransaeed

Chapter 4 Network Access

newbie2019

CCNA Discovery 3 - Chapter 7

CCNA Discovery 3 - Chapter 4

CCNA Discovery 3 - Chapter 5

What's hot (6)

Cisco CCNA module 7

scale network

Chapter 4 Network Access

CCNA Discovery 3 - Chapter 7

CCNA Discovery 3 - Chapter 4

CCNA Discovery 3 - Chapter 5

Viewers also liked

Cs348 lec8-error detection-2011

Flow Control

selvakumar_b1985

$Hs303 sadfs@sad..asd:[[\][$ $Hs303 sadfs@sad..asd:[[\][$

Hs303 sadfs@sad..asd:[[\][

Hs303

$Hs303 sadfs@sad..asd:\][$ $Hs303 sadfs@sad..asd:\][$

Hs303 sadfs@sad..asd:\][

32 Ways a Digital Marketing Consultant Can Help Grow Your Business

Barry Feldman

Viewers also liked (6)

Cs348 lec8-error detection-2011

Flow Control

$Hs303 sadfs@sad..asd:[[\][$ $Hs303 sadfs@sad..asd:[[\][$

Hs303 sadfs@sad..asd:[[\][

Hs303

$Hs303 sadfs@sad..asd:\][$ $Hs303 sadfs@sad..asd:\][$

Hs303 sadfs@sad..asd:\][

32 Ways a Digital Marketing Consultant Can Help Grow Your Business

Similar to Ccna1v31 mod06

Ccna1v31 mod09

Ccna1v31 mod01

Ccna1v31 mod11

Universitas Teknokrat Indonesia

Ccna1v3.1 mod02

Ccna1v3.1 mod02

Karthick Bala

Ccna1v31 mod01

Agus Junam

Cisco

Irvan F Panjaitan

This PowerPoint presentation covers the key topics and objectives for the CCNA 1 v3.1 Module 1 on introduction to networking. It provides instructions for instructors to locate additional teaching resources and includes slides on topics like PC basics, network interface cards, TCP/IP configuration, IP addressing, binary and hexadecimal number systems. The presentation is intended as a template for instructors to modify for their own use in teaching the module, and is not a study guide for assessments.

Ccna

Sithu PM

CCNA RS_NB - Chapter 3

United International University

Ccna routing and_switching_chapter-4-5

CCNA RS_ITN - Chapter 4

The document is a chapter from a Cisco networking textbook that covers network access and the physical and data link layers. It includes sections on physical layer protocols and network media like copper, fiber optic and wireless; data link layer protocols; and media access control techniques. The chapter aims to explain how these protocols and services support communication across networks and compares different media access control and logical topologies.

Лекц 8

Muuluu

CCNA 1 Routing and Switching v5.0 Chapter 4

Nil Menon

This document discusses network access and connectivity at the physical and data link layers. It covers various physical media including copper, fiber optic and wireless technologies. Frame structure and data link layer protocols are explained. Media access control methods for local area and wide area networks are also summarized. The objectives are to understand device connectivity options, physical and data link layer standards and protocols, and selecting the appropriate physical media.

CCNA4 Verson6 Chapter8

Chaing Ravuth

The document discusses network troubleshooting techniques. It recommends completing all troubleshooting activities in the chapter, as they will help students preparing for the CCNA exam. The document outlines troubleshooting methodology, including using network documentation, following a troubleshooting process, and isolating issues by layer. It also discusses specific troubleshooting tools, symptoms at different layers, and steps for troubleshooting IP connectivity issues.

Chapter 03 - Network Protocols and Communications

Yaser Rahmati

Chapter 3: Objectives ---------------------------------------------------------- After completing this chapter, you will be able to: Explain how rules are used to facilitate communication. Explain the role of protocols and standards organizations in facilitating interoperability in network communications. Explain how devices on a LAN access resources in a small to medium-sized business network. Yaser Rahmati | یاسر رحمتی Rahmati Academy | آکادمی رحمتی www.yaser-rahmati.ir www.rahmati-academy.ir

CCNAv5 - S1: Chapter 3 - Network protocols and communications

Vuz Dở Hơi

Chapter 3 : Network protocols and communications

teknetir

CCNA RS_NB - Chapter 9

This chapter discusses network access and the data link layer. It covers topics like media access control techniques, common network topologies, frame structure, and physical layer standards and media. The objectives are for students to understand how the data link layer supports communication across networks and the role of the physical layer in this process. Key concepts covered include Ethernet, wireless networks, fiber optic and copper cabling, and an overview of data link layer frame structure.

CCNA 1 Routing and Switching v5.0 Chapter 3

Nil Menon

The document discusses network protocols and communications. It explains that for communication between devices to occur, agreed upon rules and protocols must be followed. Key points covered include common network protocols like TCP/IP, the role of standards organizations in establishing protocols, and how data is encapsulated and moves through the layers of the OSI and TCP/IP models when transmitted over a network. The chapter also addresses how devices on a local area network access both local and remote network resources through the use of addressing schemes and default gateways.

CCNA RS_ITN - Chapter 3

This document summarizes a chapter about network protocols and communications. It discusses how rules and protocols facilitate communication between networked devices. Key points covered include the roles of standards organizations in establishing protocols, how data is encapsulated as it moves through network layers, and how devices locate resources on both local area networks and remote networks using protocols like TCP/IP and addressing schemes.

Similar to Ccna1v31 mod06 (20)

Ccna1v31 mod09

Ccna1v31 mod01

Ccna1v31 mod11

Ccna1v3.1 mod02

Ccna1v31 mod01

Cisco

Ccna

CCNA RS_NB - Chapter 3

Ccna routing and_switching_chapter-4-5

CCNA RS_ITN - Chapter 4

Лекц 8

CCNA 1 Routing and Switching v5.0 Chapter 4

CCNA4 Verson6 Chapter8

Chapter 03 - Network Protocols and Communications

CCNAv5 - S1: Chapter 3 - Network protocols and communications

Chapter 3 : Network protocols and communications

CCNA RS_NB - Chapter 9

CCNA 1 Routing and Switching v5.0 Chapter 3

CCNA RS_ITN - Chapter 3

More from igede tirtanata

EduDivision-DATACOM NETWORKING

This document provides an introduction to a data communications networking course. It outlines the course schedule which covers topics like Ethernet, WAN technologies, IP networking and more over 5 days. It also discusses course materials, prerequisites, and objectives which include gaining an understanding of modern datacom technologies. The document provides details on standardization bodies and the OSI reference model, describing each layer and how data is transmitted through the protocol stack. It also covers physical media types like coaxial cable, twisted pair, fiber and their characteristics. Standards for physical layer interfaces like RS-232, RS-422 and V-series are also introduced.

GSM 3G Basic

This document provides an overview and summary of a training course on Agenda, GSM & MPA. The course agenda covers definitions and history of GSM, GSM services, system architecture including components like the HLR, VLR, BTS, BSC and MSC. It also discusses the GSM functional model including call management, mobility management and radio resource management. The document then summarizes the GSM radio interface, protocols like DTAP and interfaces like A-bis and A. It provides high-level descriptions of GSM standards and evolution over time.

iSeries IBM

E wallet nfc service payment

The document describes an e-wallet application that allows users to make payments using Near Field Communication (NFC) technology on Android smartphones. It discusses how the application works, including user registration and login, adding payment balances by activating vouchers, and making expenditures by scanning NFC tags on smart posters. The application transfers user and transaction data between the smartphone app and a web server for validation. The document also evaluates the application's performance and network usage, finding that data reception uses more bandwidth than transmission and that internet connectivity was the main constraint reported by users. It concludes by recommending a focus on security and expanding platform support for broader use.

Cisco discovery drs ent module 8 - v.4 in english.

The document contains questions and answers about configuring and applying access control lists (ACLs) on routers. Some key points: - ACL entries are assigned sequence numbers, with new entries added at the end by default. - Inbound ACLs are more efficient than outbound ACLs as they can deny packets before routing lookups. - ACLs can be used to filter traffic, specify NAT source addresses, and identify traffic for QoS among other uses. - Standard ACLs filter based on source address only while extended ACLs can filter on additional fields and factors.

Cisco discovery drs ent module 5 - v.4 in english.

The document is a set of 20 multiple choice questions about networking concepts like VLSM, NAT, CIDR, and subnetting. Some of the questions ask about the maximum number of subnets that can be created from a specific subnet, the purpose of address overloading in NAT, the advantages of CIDR, how a router implements NAT overload, and characteristics of classful routing protocols. Other questions provide exhibits with network diagrams and ask about global vs local NAT addresses, valid subnet masks, summarized network ranges, and valid subnet addresses.

Cisco discovery drs ent module 3 - v.4 in english.

The document contains questions and answers about networking concepts like VLANs, trunking, VTP, and STP. Some key points: - A router can connect VLANs on a switch using a trunk port and subinterfaces for each VLAN. - VTP is used to maintain VLAN configuration consistency across switches in the same management domain and mode. - STP elects a root bridge and puts switch ports into blocking, listening, learning, or forwarding states to prevent loops.

Cisco discovery drs ent module 4 - v.4 in english.

The document is a set of 20 multiple choice questions about networking topics such as VLSM, NAT, CIDR, and routing protocols. Some of the questions ask about subnetting a network, the purpose of NAT overload, advantages of CIDR, how routers track addresses for NAT overload, characteristics of classful routing protocols, identifying inside and outside addresses in a NAT configuration, summarizing networks using CIDR, VLSM addressing schemes, appropriate subnet masks, available addresses in subnet configurations, routing updates sent with RIP v2, ranges of networks summarized by an address/mask, identifying the type of NAT based on translation output, available addresses for dynamic NAT pools, valid host addresses in a subnet, network/broadcast addresses in a subnet

Cisco discovery drs ent module 6 - v.4 in english.

Cisco discovery drs ent module 7 - v.4 in english.

This document contains 24 multiple choice questions about network control protocols, data transmission rates, differences between LANs and WANs, Cisco's implementation of HDLC, connectivity problems, output of debug commands, functions of PPP, demarcation points, congestion indicators, time-division multiplexing, types of WAN connections, data communications equipment, encapsulation processes, and functions of LCP and cell switching. It provides information to test knowledge of fundamental networking concepts related to protocols, interfaces, addressing, and virtual circuits.

Cisco discovery drs ent module 10 - v.4 in english.

This document contains multiple choice questions about networking topics such as VLANs, ACLs, routing protocols, and WAN technologies. Question 1 asks about the VTP mode that allows a switch to create VLANs and ignore VTP messages without passing local VLAN information. Question 2 asks about characteristics of extended ACLs. Question 3 asks about statements that are true regarding a PPP connection between two Cisco routers.

Cisco discovery d homesb module 10 final exam - v.4 in english.

Cisco discovery d homesb module 7 - v.4 in english.

The document contains 20 multiple choice questions about wireless networking technologies including IEEE 802.11, Bluetooth, Wi-Fi, WLAN components, wireless security, encryption, authentication methods, and wireless network configuration options. It tests knowledge of key topics such as the differences between wireless and wired networking, factors that influence wireless network setup and performance, and common wireless network security standards and protocols.

Cisco discovery d homesb module 7 - v.4 in english.

The document contains 20 multiple choice questions about wireless networking technologies including IEEE 802.11, Bluetooth, Wi-Fi, WLAN components, wireless security, encryption, authentication, and common configuration options. It tests knowledge of the key differences between wireless and wired networking, factors that influence wireless network setup and performance, and security best practices.

Cisco discovery d homesb module 10 final exam - v.4 in english.

Ccna1v3 mod11

Ccna1v3 mod10

This document provides an overview of routing fundamentals and subnetting in CCNA version 3.0. It discusses routed and routing protocols, how IP acts as a routed protocol, routing tables, routing algorithms and metrics, and the mechanics of subnetting including establishing subnet masks and calculating subnetworks through ANDing. The objectives are to understand routed protocols, IP routing protocols, and the mechanics of subnetting.

Ccna1v3 mod09

Ccna1v3 mod08

This PowerPoint provides targets and objectives for CCNA 1 v3.0 Module 8 on Ethernet Switching. It is intended for instructors to modify for their own use, and is not a study guide for assessments or certification exams. The document outlines key topics covered in the module like collision domains, broadcast domains, switch operation modes, spanning tree protocol states, and how switches segment broadcast domains to reduce broadcast traffic.

Ccna1v3 mod03