Ccna1v31 mod05

This document is a PowerPoint presentation about cable testing for CCNA 1 v3.1 Module 4. It provides an overview of topics like waves, exponents and logarithms, decibels, analog and digital signals, bandwidth, signaling over copper and fiber, attenuation and insertion loss, sources of noise, crosstalk, cable testing standards, and testing optical fiber. The presentation notes that a quality cable tester for Cat5e cabling is the Fluke DSP-LIA013 Channel/Traffic Adapter.

Ccna1v31 mod07

This document is a PowerPoint presentation about Ethernet technologies that was created for instructors to modify for their own use. It covers the history and standards of Ethernet, including the parameters and implementations of 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps Ethernet. The presentation provides information on Ethernet frames, encoding methods, cable types, and maximum distances for different Ethernet architectures. It concludes with a discussion of the expanding scope and future of Ethernet networking.

Ccna1v31 mod02

This document is a PowerPoint presentation about networking fundamentals and concepts such as network history, devices, topologies, protocols, and models including OSI and TCP/IP. It provides information on different types of networks including LANs, WANs, MANs, and SANs. The presentation also covers topics such as bandwidth measurements, digital versus analog, peer-to-peer communication, and encapsulation. The purpose is to present the key concepts and targets for a CCNA networking module through slides with descriptive text and diagrams.

CCNA Exploration 4 - Chapter 1

The document discusses wide area network (WAN) technologies and Cisco's Enterprise Composite Model (ECNM) for integrated WAN services. It aims to describe how ECNM provides services across an enterprise network, identify key WAN concepts, and determine the appropriate WAN technologies to match ECNM practices with enterprise requirements. Specific topics covered include WAN definitions and functions, stages of business growth and their network needs, problems with traditional network models, Cisco enterprise architectures, WAN protocols and switching, and factors for selecting WAN connections.

Exploration lan switching_capítulo5

Vitor Albuquerque

CCNA Exploration 4 - Chapter 3

This document discusses Frame Relay networking concepts and configuration. It covers fundamental Frame Relay concepts such as encapsulation and virtual circuits. It also covers configuring basic and advanced Frame Relay PVCs, including subinterfaces, bandwidth control, and flow control. Troubleshooting techniques are provided. The overall purpose is to teach system administrators how to implement and manage Frame Relay networks.

The document discusses the VLAN Trunking Protocol (VTP) which is used to manage VLANs across multiple switches in a network. It describes the challenges of VLAN management, the role of VTP in multi-switch networks, VTP components and configuration including the default configuration, propagation of the VTP domain, revision number, modes, pruning, and configuring and troubleshooting VTP on Cisco Catalyst switches.

Cisco CCNA module 8

This document discusses Ethernet switching and how switches work to segment collision domains to improve network performance. It explains that switches divide the network into smaller collision domains by learning MAC addresses and directing traffic only to relevant ports. This reduces bandwidth-limiting broadcast traffic and allows for full-duplex communication between connected devices without collisions. The document also covers spanning tree protocol, switch operation modes, and how routers further segment broadcast domains.

Cisco CCNA module 5

This document discusses cabling for LANs and WANs. It covers topics like Ethernet cabling and connectors used in campus networks, the use of UTP cable for implementing Ethernet, and networking devices like repeaters, hubs, bridges, and switches. The document also discusses WAN connectivity using serial connections, ISDN, DSL, and the role of routers in providing connectivity within the LAN and to the WAN.

scale network

miransaeed

This document discusses link aggregation and EtherChannel technologies. It explains that link aggregation allows combining multiple physical links into logical links to improve performance and redundancy. EtherChannel is a common method of link aggregation that load balances traffic across physical links. The document provides instructions on configuring EtherChannel and verifying the link aggregation, including checking the status of EtherChannel interfaces and troubleshooting any issues.

CCNA Discovery 3 - Chapter 7

The document discusses different wide area network (WAN) connectivity options and configurations. It describes common WAN technologies like circuit switching, packet switching, and cell switching. It also covers different WAN encapsulation methods, specifically HDLC and PPP. Features of PPP like authentication and compression are outlined. Finally, the document defines Frame Relay, describing its use of virtual circuits, DLCIs, and traffic management techniques.

Cisco CCNA module 3

CCNA Discovery 3 - Chapter 4

This document discusses addressing in an enterprise network. It covers hierarchical IP addressing structures using subnetting to divide networks. Variable length subnet masking (VLSM) allows flexible subnet sizes. Classless routing and CIDR use network prefixes instead of classful routing. Network address translation (NAT) translates private addresses to public addresses, and port address translation (PAT) maps multiple private addresses to one public address.

Exercise 4c stp rapid pvst+ question

sufi1248

This document describes a lab that configures Rapid PVST+, PortFast, and BPDU Guard on a network with three switches (S1, S2, S3) and two PCs (PC-A, PC-C). The lab has four parts: 1) build the network and configure basic settings, 2) configure VLANs, native VLAN, and trunks, 3) configure the root bridge and examine PVST+ convergence, and 4) configure Rapid PVST+, PortFast, BPDU Guard, and examine convergence. The objectives are to optimize network performance by configuring Rapid PVST+ for faster convergence, and configure PortFast and BPDU Guard on edge ports.

CCNA Discovery 3 - Chapter 5

The document discusses routing protocols for enterprise networks, comparing flat networks to hierarchical topologies. It covers configuring networks using RIP, a distance vector protocol, and EIGRP, Cisco's proprietary protocol. Key topics include building routing tables, static versus dynamic routing, RIP and EIGRP metrics and operation, and designing networks using EIGRP features like summarization.

Cisco CCNA module 7

The document discusses the evolution of Ethernet technologies over time, from the original 10 Mbps Ethernet standard to faster standards such as Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet. It describes the key characteristics of each technology, including the types of media used (e.g. coaxial cable, fiber optic cable), encoding methods employed, and typical maximum transmission distances. The document suggests that while copper and wireless technologies may soon reach their speed limitations, fiber optic connections still have enormous potential bandwidth and will continue enabling faster Ethernet standards in the future.

Ccie collaboration

Siyam Sohail

American Fibertek ECR-8-POE Data Sheet

JMAC Supply

CCNP Switching Chapter 9

Chaing Ravuth

This chapter discusses high availability features in Cisco switches including StackWise, Virtual Switching System (VSS), and supervisor redundancy. StackWise allows switches to be grouped into a single logical switch for configuration and management. VSS combines two physical switches into one virtual switch. Redundant supervisor modules and protocols like Stateful Switchover (SSO) provide continuity of operations during supervisor failures.

CCNA Discovery 3 - Chapter 8

United International University

This document discusses how access control lists (ACLs) can be used to filter network traffic. ACLs allow network administrators to analyze packet contents and either allow or block packets based on criteria like source/destination IP addresses and protocols. ACLs can be implemented on routers, firewalls, and servers to specify allowed traffic, classify traffic for quality of service, and restrict certain activities. The document provides guidance on creating standard, extended, and named ACLs; using wildcard masks; applying ACLs to interfaces; and logging ACL activity for monitoring.

Ccna routing and_switching_chapter-4-5

The document discusses networking concepts related to the physical and data link layers. It covers topics like physical layer protocols, Ethernet, cabling types (copper, fiber, wireless), network access methods, data link frames and addresses, and protocols like ARP. The presentation is intended to help students learn objectives for chapters 4 and 5 on network access, Ethernet, and related lower layer concepts.

Exploration routing chapter 10 & 11

Sachii Dosti

The document discusses link-state routing protocols and OSPF in particular. It describes how link-state protocols build a topological map of the network and use the SPF algorithm to independently calculate the shortest path to all networks. OSPF is introduced as an example link-state protocol, with explanations of its message encapsulation, packet types, hello protocol for neighbor discovery, link-state updates for exchanging routing information, and basic configuration including setting the router ID and verifying OSPF neighbors. The document also covers how OSPF uses cost based on bandwidth as its routing metric.

It nv51 instructor_ppt_ch1

Vigor2925 LTE Series

DrayTek

Dual-WAN & Built-in LTE Load Balancing VPN Router Vigor2925 LTE Series is a firewall router that features all the specification as Vigor2925 LTE Series, but builds in a 3G/4G/LTE modem that works with a stand size SIM card, this provides the router wireless Internet connectivity without the need of an external USB modem. Like Vigor2925 LTE Series, it has two Gigabit Ethernet WAN ports which can be used for load balancing or failover. If you have another SIM card, the USB port can also be used with a 3G/4G/LTE USB modem to add extra Internet connectivity. Vigor2925 LTE Series offers features including VPN, Firewall, Content Filtering, and Central Management Solution for Vigor access points and switches, which makes it the perfect solution for a small-medium business.

Overview on cisco catalyst 3750 switches,features, technology, intelligent sw...

IT Tech

Cisco mobile offload_architecture_21062012

c0nd3

The document provides an overview of Cisco's mobile offload architecture and frameworks. It discusses the market environment driving increased mobile data usage and the need for offloading traffic from cellular networks. The presentation then describes Cisco's SP WiFi offload architecture, which features intelligent radios, a unified architecture, seamless user experience, and converged core to enable scalable carrier-grade offload of mobile data traffic onto wireless networks.

Why WiFI Offload?

Dr. Mazlan Abbas

This document discusses the components necessary for developing an effective WiFi offload strategy. It notes that up to 45% of mobile data is already offloaded through casual use of home, work, and public WiFi networks. The key components identified are: (1) determining what types of data to offload (e.g. video streaming), (2) where to offload to including carrier WiFi networks, partner WiFi networks, and public WiFi hotspots, and (3) how to implement an effective WiFi management solution

What's hot

Huawei S5700 28 p-pwr-li-ac introduction

Huanetwork

Exploration lan switching_capítulo4

Cisco CCNA module 8

Cisco CCNA module 5

scale network

CCNA Discovery 3 - Chapter 7

Cisco CCNA module 3

CCNA Discovery 3 - Chapter 4

Exercise 4c stp rapid pvst+ question

sufi1248

CCNA Discovery 3 - Chapter 5

Cisco CCNA module 7

Ccie collaboration

Siyam Sohail

American Fibertek ECR-8-POE Data Sheet

JMAC Supply

CCNP Switching Chapter 9

Chaing Ravuth

CCNA Discovery 3 - Chapter 8

United International University

Ccna routing and_switching_chapter-4-5

Exploration routing chapter 10 & 11

Sachii Dosti

It nv51 instructor_ppt_ch1

Vigor2925 LTE Series

DrayTek

Overview on cisco catalyst 3750 switches,features, technology, intelligent sw...

IT Tech

What's hot (20)

Huawei S5700 28 p-pwr-li-ac introduction

Exploration lan switching_capítulo4

Cisco CCNA module 8

Cisco CCNA module 5

scale network

CCNA Discovery 3 - Chapter 7

Cisco CCNA module 3

CCNA Discovery 3 - Chapter 4

Exercise 4c stp rapid pvst+ question

CCNA Discovery 3 - Chapter 5

Cisco CCNA module 7

Ccie collaboration

American Fibertek ECR-8-POE Data Sheet

CCNP Switching Chapter 9

CCNA Discovery 3 - Chapter 8

Ccna routing and_switching_chapter-4-5

Exploration routing chapter 10 & 11

It nv51 instructor_ppt_ch1

Vigor2925 LTE Series

Overview on cisco catalyst 3750 switches,features, technology, intelligent sw...

Viewers also liked

Cisco mobile offload_architecture_21062012

c0nd3

Why WiFI Offload?

Dr. Mazlan Abbas

Cisco Product Migration options

DCom82

Building a WiFi Hotspot with NodeJS: Cisco Meraki - ExCap API

Cisco DevNet

This document discusses building a WiFi hotspot using Node.js and the Cisco Meraki ExCap API. It describes using Node.js and Express to create web services that handle click-through, sign-on, and social login splash pages. Sessions are stored in MongoDB. Templates are rendered using Handlebars. The API provides parameters like login URLs and splash page URLs. Code examples show routing and passport authentication strategies for social logins.

Understanding Wi-Fi offload

Kenan Masic

Wi-Fi offload in cellular networks allows mobile data to be carried over both 3GPP cellular networks and non-3GPP networks such as Wi-Fi. The Evolved Packet Core architecture defines how a user equipment can connect to and move between these network types. Key technologies that enable seamless Wi-Fi offload include the Access Network Discovery and Selection Function for network selection policies, EAP-SIM/EAP-AKA authentication over trusted Wi-Fi access, and the enhanced Packet Data Gateway for securing untrusted access via IPsec tunnels. Session continuity is managed through either network-based mobility protocols run independently or client-based protocols using the UE.

Calling VoWiFi... The Next Mobile Operator Service is here...

Cisco Canada

Viewers also liked (6)

Cisco mobile offload_architecture_21062012

Why WiFI Offload?

Cisco Product Migration options

Building a WiFi Hotspot with NodeJS: Cisco Meraki - ExCap API

Understanding Wi-Fi offload

Calling VoWiFi... The Next Mobile Operator Service is here...

Similar to Ccna1v31 mod05

Ccna1v31 mod09

Ccna1v31 mod11

This PowerPoint presentation covers the TCP/IP transport and application layers from CCNA 1 v3.1 Module 11. It includes slides on topics like transport layer analogies, flow control, multiplexing, establishing connections, session maintenance, the three-way handshake, TCP sliding windows, TCP segments, UDP segments, port numbers, FTP, URLs, email messaging, SNMP, and Telnet. The presentation is intended for instructors to modify for their own use, and not as a study guide for assessments.

Ccna1v31 mod01

Universitas Teknokrat Indonesia

This PowerPoint presentation covers the key topics in CCNA 1 v3.1 Module 1 including PC basics, network interface cards, TCP/IP configuration, binary and hexadecimal number systems, IP addressing, and networking troubleshooting. It was created for instructors to modify for their classes and provides the target indicators for the module. The presentation instructs users to report any errors found and lists resources for additional instructional materials.

Ccna1v3.1 mod02

This PowerPoint presentation covers networking fundamentals and concepts including network history, devices, topologies, protocols, LANs, WANs, MANs, storage networks, VPNs, bandwidth, digital transfer, OSI and TCP/IP models, encapsulation, and data naming at each layer. It is intended for instructors to modify for their classes and provides objectives and content for the CCNA 1 v3.1 Module 2 on networking fundamentals.

Ccna1v3.1 mod02

Karthick Bala

Ccna1v31 mod01

Agus Junam

This PowerPoint presentation covers the key topics and objectives for the CCNA 1 v3.1 Module 1 on introduction to networking. It provides instructions for instructors to locate instructional resources and includes slides on PC basics, network interface cards, TCP/IP configuration, IP addressing, binary and hexadecimal number systems, and networking troubleshooting. The presentation is intended for instructors to modify for their own use in teaching the module and is not a study guide for assessments.

Cisco

Irvan F Panjaitan

This PowerPoint presentation covers the key topics and objectives for the CCNA 1 v3.1 Module 1 on introduction to networking. It provides instructions for instructors to locate additional teaching resources and includes slides on topics like PC basics, network interface cards, TCP/IP configuration, IP addressing, binary and hexadecimal number systems. The presentation is intended as a template for instructors to modify for their own use in teaching the module, and is not a study guide for assessments.

CCNA RS_NB - Chapter 3

This document summarizes a chapter about network protocols and communications. It discusses how protocols establish communication rules and standards organizations develop protocols through processes like RFCs. It also describes how data is encapsulated when moving through networks and OSI and TCP/IP models for conceptualizing network layers. Specific topics covered include protocol suites, addressing, data encapsulation, accessing local and remote network resources, and standards bodies.

Ccna

Sithu PM

This document contains summaries of networking fundamentals topics such as network history, devices, topologies, protocols, and models like OSI and TCP/IP. It discusses different types of networks including LANs, WANs, MANs, and VPNs. It also covers related concepts such as bandwidth measurements, digital transfer calculations, encapsulation, and the names for data at each layer of the networking models. The document is made up of multiple sections copyrighted by Cisco Systems from their CCNA 1 curriculum on networking fundamentals.

Cisco CCNA module 9

The document discusses the TCP/IP protocol suite and IP addressing. It describes how the Department of Defense developed TCP/IP to allow communication networks to continue functioning during wartime. It also outlines the layers of the TCP/IP model including the transport layer protocols like TCP and UDP, the internet layer protocol IP, and network access protocols. Finally, it covers key topics relating to IP addressing including address classes, private addressing, and network address translation.

CCNA RS_ITN - Chapter 4

The document is a chapter from a Cisco networking textbook that covers network access and the physical and data link layers. It includes sections on physical layer protocols and network media like copper, fiber optic and wireless; data link layer protocols; and media access control techniques. The chapter aims to explain how these protocols and services support communication across networks and compares different media access control and logical topologies.

CCNA 1 Routing and Switching v5.0 Chapter 4

Nil Menon

This document discusses network access and connectivity at the physical and data link layers. It covers various physical media including copper, fiber optic and wireless technologies. Frame structure and data link layer protocols are explained. Media access control methods for local area and wide area networks are also summarized. The objectives are to understand device connectivity options, physical and data link layer standards and protocols, and selecting the appropriate physical media.

Chapter 3 Network Protocol and Communications

CCNA Discovery 4 - Chapter 8

Chapter 8

ali raza

The document discusses methods for prototyping remote connectivity and WAN connectivity, including using simulation software, simulated links in a prototype lab, and pilot testing. It describes prototyping a Frame Relay WAN connection using Cisco routers and validating choices of WAN devices, topologies, and VPN technologies to meet business and technical requirements. The prototype tests remote worker VPN connectivity using Cisco EasyVPN and validates the placement of the VPN server and access filtering.

Apricot2004 bgp00

La Htoi Layang

Ccna2v3 mod07

Sumit Tambe

It nv51 instructor_ppt_ch6

CCNA Discovery 1 - Chapter 4

The document discusses how individuals and businesses connect to the Internet through an Internet Service Provider (ISP). It explains that ISPs allow users to access the Internet by linking their local networks to the global network of networks that make up the Internet. The document describes how ISPs route information packets across the Internet and maintain high-capacity network operations centers to handle user traffic. It also reviews common cable types used in networking and standards for properly constructing and terminating cables.

Chapter 5

ali raza

The document discusses the process of designing a computer network. It outlines analyzing business goals and application requirements, utilizing a hierarchical design model, selecting appropriate WAN connectivity, incorporating wireless connectivity into the LAN design, and incorporating security measures. The goals are to design a cost-effective network that matches the organization's needs, provides connectivity for devices, and implements security features like firewalls and access control lists.

Similar to Ccna1v31 mod05 (20)

Ccna1v31 mod09

Ccna1v31 mod11

Ccna1v31 mod01

Ccna1v3.1 mod02

Ccna1v31 mod01

Cisco

CCNA RS_NB - Chapter 3

Ccna

Cisco CCNA module 9

CCNA RS_ITN - Chapter 4

CCNA 1 Routing and Switching v5.0 Chapter 4

Chapter 3 Network Protocol and Communications

CCNA Discovery 4 - Chapter 8

Chapter 8

Apricot2004 bgp00

Ccna2v3 mod07

It nv51 instructor_ppt_ch6

CCNA Discovery 1 - Chapter 4

Chapter 5

More from igede tirtanata

EduDivision-DATACOM NETWORKING

This document provides an introduction to a data communications networking course. It outlines the course schedule which covers topics like Ethernet, WAN technologies, IP networking and more over 5 days. It also discusses course materials, prerequisites, and objectives which include gaining an understanding of modern datacom technologies. The document provides details on standardization bodies and the OSI reference model, describing each layer and how data is transmitted through the protocol stack. It also covers physical media types like coaxial cable, twisted pair, fiber and their characteristics. Standards for physical layer interfaces like RS-232, RS-422 and V-series are also introduced.

GSM 3G Basic

This document provides an overview and summary of a training course on Agenda, GSM & MPA. The course agenda covers definitions and history of GSM, GSM services, system architecture including components like the HLR, VLR, BTS, BSC and MSC. It also discusses the GSM functional model including call management, mobility management and radio resource management. The document then summarizes the GSM radio interface, protocols like DTAP and interfaces like A-bis and A. It provides high-level descriptions of GSM standards and evolution over time.

iSeries IBM

E wallet nfc service payment

The document describes an e-wallet application that allows users to make payments using Near Field Communication (NFC) technology on Android smartphones. It discusses how the application works, including user registration and login, adding payment balances by activating vouchers, and making expenditures by scanning NFC tags on smart posters. The application transfers user and transaction data between the smartphone app and a web server for validation. The document also evaluates the application's performance and network usage, finding that data reception uses more bandwidth than transmission and that internet connectivity was the main constraint reported by users. It concludes by recommending a focus on security and expanding platform support for broader use.

Cisco discovery drs ent module 8 - v.4 in english.

The document contains questions and answers about configuring and applying access control lists (ACLs) on routers. Some key points: - ACL entries are assigned sequence numbers, with new entries added at the end by default. - Inbound ACLs are more efficient than outbound ACLs as they can deny packets before routing lookups. - ACLs can be used to filter traffic, specify NAT source addresses, and identify traffic for QoS among other uses. - Standard ACLs filter based on source address only while extended ACLs can filter on additional fields and factors.

Cisco discovery drs ent module 5 - v.4 in english.

The document is a set of 20 multiple choice questions about networking concepts like VLSM, NAT, CIDR, and subnetting. Some of the questions ask about the maximum number of subnets that can be created from a specific subnet, the purpose of address overloading in NAT, the advantages of CIDR, how a router implements NAT overload, and characteristics of classful routing protocols. Other questions provide exhibits with network diagrams and ask about global vs local NAT addresses, valid subnet masks, summarized network ranges, and valid subnet addresses.

Cisco discovery drs ent module 3 - v.4 in english.

The document contains questions and answers about networking concepts like VLANs, trunking, VTP, and STP. Some key points: - A router can connect VLANs on a switch using a trunk port and subinterfaces for each VLAN. - VTP is used to maintain VLAN configuration consistency across switches in the same management domain and mode. - STP elects a root bridge and puts switch ports into blocking, listening, learning, or forwarding states to prevent loops.

Cisco discovery drs ent module 4 - v.4 in english.

The document is a set of 20 multiple choice questions about networking topics such as VLSM, NAT, CIDR, and routing protocols. Some of the questions ask about subnetting a network, the purpose of NAT overload, advantages of CIDR, how routers track addresses for NAT overload, characteristics of classful routing protocols, identifying inside and outside addresses in a NAT configuration, summarizing networks using CIDR, VLSM addressing schemes, appropriate subnet masks, available addresses in subnet configurations, routing updates sent with RIP v2, ranges of networks summarized by an address/mask, identifying the type of NAT based on translation output, available addresses for dynamic NAT pools, valid host addresses in a subnet, network/broadcast addresses in a subnet

Cisco discovery drs ent module 6 - v.4 in english.

Cisco discovery drs ent module 7 - v.4 in english.

This document contains 24 multiple choice questions about network control protocols, data transmission rates, differences between LANs and WANs, Cisco's implementation of HDLC, connectivity problems, output of debug commands, functions of PPP, demarcation points, congestion indicators, time-division multiplexing, types of WAN connections, data communications equipment, encapsulation processes, and functions of LCP and cell switching. It provides information to test knowledge of fundamental networking concepts related to protocols, interfaces, addressing, and virtual circuits.

Cisco discovery drs ent module 10 - v.4 in english.

This document contains multiple choice questions about networking topics such as VLANs, ACLs, routing protocols, and WAN technologies. Question 1 asks about the VTP mode that allows a switch to create VLANs and ignore VTP messages without passing local VLAN information. Question 2 asks about characteristics of extended ACLs. Question 3 asks about statements that are true regarding a PPP connection between two Cisco routers.

Cisco discovery d homesb module 10 final exam - v.4 in english.

Cisco discovery d homesb module 7 - v.4 in english.

The document contains 20 multiple choice questions about wireless networking technologies including IEEE 802.11, Bluetooth, Wi-Fi, WLAN components, wireless security, encryption, authentication methods, and wireless network configuration options. It tests knowledge of key topics such as the differences between wireless and wired networking, factors that influence wireless network setup and performance, and common wireless network security standards and protocols.

Cisco discovery d homesb module 7 - v.4 in english.

The document contains 20 multiple choice questions about wireless networking technologies including IEEE 802.11, Bluetooth, Wi-Fi, WLAN components, wireless security, encryption, authentication, and common configuration options. It tests knowledge of the key differences between wireless and wired networking, factors that influence wireless network setup and performance, and security best practices.

Cisco discovery d homesb module 10 final exam - v.4 in english.

Ccna1v3 mod11

Ccna1v3 mod10

This document provides an overview of routing fundamentals and subnetting in CCNA version 3.0. It discusses routed and routing protocols, how IP acts as a routed protocol, routing tables, routing algorithms and metrics, and the mechanics of subnetting including establishing subnet masks and calculating subnetworks through ANDing. The objectives are to understand routed protocols, IP routing protocols, and the mechanics of subnetting.

Ccna1v3 mod09

Ccna1v3 mod08

This PowerPoint provides targets and objectives for CCNA 1 v3.0 Module 8 on Ethernet Switching. It is intended for instructors to modify for their own use, and is not a study guide for assessments or certification exams. The document outlines key topics covered in the module like collision domains, broadcast domains, switch operation modes, spanning tree protocol states, and how switches segment broadcast domains to reduce broadcast traffic.

Ccna1v3 mod03