Ccna1v31 mod03

Cisco CCNA module 8

This document discusses Ethernet switching and how switches work to segment collision domains to improve network performance. It explains that switches divide the network into smaller collision domains by learning MAC addresses and directing traffic only to relevant ports. This reduces bandwidth-limiting broadcast traffic and allows for full-duplex communication between connected devices without collisions. The document also covers spanning tree protocol, switch operation modes, and how routers further segment broadcast domains.

Cisco CCNA module 5

This document discusses cabling for LANs and WANs. It covers topics like Ethernet cabling and connectors used in campus networks, the use of UTP cable for implementing Ethernet, and networking devices like repeaters, hubs, bridges, and switches. The document also discusses WAN connectivity using serial connections, ISDN, DSL, and the role of routers in providing connectivity within the LAN and to the WAN.

Cisco CCNA module 4

Cisco CCNA module 3

Cisco CCNA module 7

The document discusses the evolution of Ethernet technologies over time, from the original 10 Mbps Ethernet standard to faster standards such as Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet. It describes the key characteristics of each technology, including the types of media used (e.g. coaxial cable, fiber optic cable), encoding methods employed, and typical maximum transmission distances. The document suggests that while copper and wireless technologies may soon reach their speed limitations, fiber optic connections still have enormous potential bandwidth and will continue enabling faster Ethernet standards in the future.

Cisco CCNA module 6

This document provides an overview of Ethernet fundamentals, including: - Ethernet is a bus network where multiple computers share a transmission medium and must wait their turn to transmit. - It operates at the physical and data link layers of the OSI model. - Ethernet frames include source and destination MAC addresses, data, and error checking fields. - CSMA/CD is used for media access where devices listen before transmitting and can detect collisions. - Ethernet has been successful due to its simplicity, ability to evolve with new technologies, reliability, and low cost.

The document discusses the TCP/IP protocol suite and IP addressing. It describes how the Department of Defense developed TCP/IP to allow communication networks to continue functioning during wartime. It also outlines the layers of the TCP/IP model including the transport layer protocols like TCP and UDP, the internet layer protocol IP, and network access protocols. Finally, it covers key topics relating to IP addressing including address classes, private addressing, and network address translation.

Ccna1v31 mod02

This document is a PowerPoint presentation about networking fundamentals and concepts such as network history, devices, topologies, protocols, and models including OSI and TCP/IP. It provides information on different types of networks including LANs, WANs, MANs, and SANs. The presentation also covers topics such as bandwidth measurements, digital versus analog, peer-to-peer communication, and encapsulation. The purpose is to present the key concepts and targets for a CCNA networking module through slides with descriptive text and diagrams.

Cisco CCNA module 2

CCNAv5 - S3: Chapter3 Link Aggregation

012 2 ccna sv2-instructor_ppt_ch9

Babaa Naya

The document provides an overview of implementing the Cisco Adaptive Security Appliance (ASA), including comparing ASA solutions to other routing firewall technologies, explaining ASA operation and models for various use cases. It outlines objectives for configuring basic ASA firewall services like access lists, network address translation, and authentication. The document also covers advanced ASA policies using the modular policy framework.

CCNA Exploration 4 - Chapter 6

The document discusses providing teleworker services through virtual private networks (VPNs). It describes the requirements for teleworker services, how broadband technologies extend enterprise networks, and how VPN technology provides secure remote access. Specifically, teleworker services require maintaining operations continuity, increasing services access, and scalability, while providing secure, reliable access to information in a cost-effective manner. Broadband technologies that extend networks include cable, DSL, and wireless connectivity options. VPNs secure teleworker access through advanced encryption, tunneling, data confidentiality, integrity and authentication.

Chapter 4 Network Access

CCNAv5 - S3: Chapter 4 Wireless Lans

Chapter 3 Network Protocol and Communications

It nv51 instructor_ppt_ch1

Exploration Lan Switching Chapter3

This document discusses VLANs and trunking in converged networks. It explains that VLANs logically group devices to segment broadcast domains, reducing costs and improving security and performance. Types of VLAN traffic include data, voice, and network protocols. Communication between VLANs requires routers. Trunks are used for intra-VLAN communication and use 802.1Q tagging to identify frame VLANs, without tagging the native VLAN. The document also covers configuring and troubleshooting VLANs and trunks on Cisco switches.

Ccna v5-S1-Chapter 4

Hamza Malik

This document is a chapter from a Cisco networking textbook that covers network access and the physical and data link layers. It discusses various physical network media like copper, fiber optic, and wireless cables and standards. It also examines data link layer protocols, frame structure, and media access control techniques. Specific topics include Ethernet, Wi-Fi, Bluetooth standards, logical link control, MAC sublayers, and common physical WAN topologies. The objectives are to explain how the physical and data link layers support network communications and compare different media access methods.

Exploration lan switching_capítulo5

Vitor Albuquerque

CCNA Exploration 4 - Chapter 1

The document discusses wide area network (WAN) technologies and Cisco's Enterprise Composite Model (ECNM) for integrated WAN services. It aims to describe how ECNM provides services across an enterprise network, identify key WAN concepts, and determine the appropriate WAN technologies to match ECNM practices with enterprise requirements. Specific topics covered include WAN definitions and functions, stages of business growth and their network needs, problems with traditional network models, Cisco enterprise architectures, WAN protocols and switching, and factors for selecting WAN connections.

Exploration Lan Switching Chapter2

United International University

The document discusses configuring and securing a switch for use in a network. It describes summarizing Ethernet operations, switch forwarding methods, and configuring a switch through the Cisco IOS including security features like passwords, SSH, and port security. The objectives are to understand Ethernet, how switches forward frames, and configure a switch for a voice, video and data network with basic security.

Ccna routing and_switching_chapter-4-5

The document discusses networking concepts related to the physical and data link layers. It covers topics like physical layer protocols, Ethernet, cabling types (copper, fiber, wireless), network access methods, data link frames and addresses, and protocols like ARP. The presentation is intended to help students learn objectives for chapters 4 and 5 on network access, Ethernet, and related lower layer concepts.

CCNA Exploration 3 - Chapter 4

CCNA Exploration 4 - Chapter 4

The document discusses securing enterprise networks and Cisco routers. It describes common security threats to enterprise networks like viruses and hacking and methods to mitigate them, including device hardening, firewalls, and updated software. The document also provides guidance on configuring basic router security features, disabling unused router services and interfaces to minimize vulnerabilities, using Cisco Secure Device Manager to lock down routers, and managing Cisco IOS devices including updating software and backing up files.

CCNA 1 Routing and Switching v5.0 Chapter 5

Nil Menon

This document provides an overview of Ethernet networking concepts including: - How Ethernet frames are encapsulated and the purpose of the MAC sublayers. - How MAC addresses are assigned and their role in end-to-end communication. - The purpose and process of ARP for resolving IP addresses to MAC addresses. - Basic functions of network switches including building the MAC address table and frame forwarding methods like cut-through switching.

CCNA Exploration 3 - Chapter 7

The document discusses configuring and troubleshooting wireless local area networks (WLANs). It covers wireless LAN topologies and components, security protocols and practices, and how to configure a wireless access point and network interface card. Troubleshooting techniques for wireless client access issues are also examined, including solving problems related to access point firmware, radio frequency interference, encryption settings, and authentication.

Ccna1v31 mod04

This document is a PowerPoint presentation about cable testing for CCNA 1 v3.1 Module 4. It provides an overview of topics like waves, exponents and logarithms, decibels, analog and digital signals, bandwidth, signaling over copper and fiber, attenuation and insertion loss, sources of noise, crosstalk, cable testing standards, and testing optical fiber. The presentation notes that a quality cable tester for Cat5e cabling is the Fluke DSP-LIA013 Channel/Traffic Adapter.

Ccna1v31 mod09

What's hot

Cisco CCNA module 9

Ccna1v31 mod02

Cisco CCNA module 2

CCNAv5 - S3: Chapter3 Link Aggregation

012 2 ccna sv2-instructor_ppt_ch9

Babaa Naya

CCNA Exploration 4 - Chapter 6

Chapter 4 Network Access

CCNAv5 - S3: Chapter 4 Wireless Lans

Chapter 3 Network Protocol and Communications

It nv51 instructor_ppt_ch1

Exploration Lan Switching Chapter3

Ccna v5-S1-Chapter 4

Hamza Malik

Exploration lan switching_capítulo5

Vitor Albuquerque

CCNA Exploration 4 - Chapter 1

Exploration Lan Switching Chapter2

United International University

Ccna routing and_switching_chapter-4-5

CCNA Exploration 3 - Chapter 4

CCNA Exploration 4 - Chapter 4

CCNA 1 Routing and Switching v5.0 Chapter 5

Nil Menon

CCNA Exploration 3 - Chapter 7

What's hot (20)

Cisco CCNA module 9

Ccna1v31 mod02

Cisco CCNA module 2

CCNAv5 - S3: Chapter3 Link Aggregation

012 2 ccna sv2-instructor_ppt_ch9

CCNA Exploration 4 - Chapter 6

Chapter 4 Network Access

CCNAv5 - S3: Chapter 4 Wireless Lans

Chapter 3 Network Protocol and Communications

It nv51 instructor_ppt_ch1

Exploration Lan Switching Chapter3

Ccna v5-S1-Chapter 4

Exploration lan switching_capítulo5

CCNA Exploration 4 - Chapter 1

Exploration Lan Switching Chapter2

Ccna routing and_switching_chapter-4-5

CCNA Exploration 3 - Chapter 4

CCNA Exploration 4 - Chapter 4

CCNA 1 Routing and Switching v5.0 Chapter 5

CCNA Exploration 3 - Chapter 7

Similar to Ccna1v31 mod03

Ccna1v31 mod04

Ccna1v31 mod09

Ccna1v31 mod01

This PowerPoint presentation covers the key topics in CCNA 1 v3.1 Module 1 including PC basics, network interface cards, TCP/IP configuration, binary and hexadecimal number systems, IP addressing, and networking troubleshooting. It was created for instructors to modify for their classes and provides the target indicators for the module. The presentation instructs users to report any errors found and lists resources for additional instructional materials.

Ccna1v31 mod07

Universitas Teknokrat Indonesia

This document is a PowerPoint presentation about Ethernet technologies that was created for instructors to modify for their own use. It covers the history and standards of Ethernet, including the parameters and implementations of 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps Ethernet. The presentation provides information on Ethernet frames, encoding methods, cable types, and maximum distances for different Ethernet architectures. It concludes with a discussion of the expanding scope and future of Ethernet networking.

Ccna

Sithu PM

This document contains summaries of networking fundamentals topics such as network history, devices, topologies, protocols, and models like OSI and TCP/IP. It discusses different types of networks including LANs, WANs, MANs, and VPNs. It also covers related concepts such as bandwidth measurements, digital transfer calculations, encapsulation, and the names for data at each layer of the networking models. The document is made up of multiple sections copyrighted by Cisco Systems from their CCNA 1 curriculum on networking fundamentals.

CCNA 1 Routing and Switching v5.0 Chapter 4

Nil Menon

This document discusses network access and connectivity at the physical and data link layers. It covers various physical media including copper, fiber optic and wireless technologies. Frame structure and data link layer protocols are explained. Media access control methods for local area and wide area networks are also summarized. The objectives are to understand device connectivity options, physical and data link layer standards and protocols, and selecting the appropriate physical media.

Ccna1v3.1 mod02

This PowerPoint presentation covers networking fundamentals and concepts including network history, devices, topologies, protocols, LANs, WANs, MANs, storage networks, VPNs, bandwidth, digital transfer, OSI and TCP/IP models, encapsulation, and data naming at each layer. It is intended for instructors to modify for their classes and provides objectives and content for the CCNA 1 v3.1 Module 2 on networking fundamentals.

Ccna1v3.1 mod02

Karthick Bala

CCNA RS_ITN - Chapter 4

The document is a chapter from a Cisco networking textbook that covers network access and the physical and data link layers. It includes sections on physical layer protocols and network media like copper, fiber optic and wireless; data link layer protocols; and media access control techniques. The chapter aims to explain how these protocols and services support communication across networks and compares different media access control and logical topologies.

Ccna1v31 mod11

This PowerPoint presentation covers the TCP/IP transport and application layers from CCNA 1 v3.1 Module 11. It includes slides on topics like transport layer analogies, flow control, multiplexing, establishing connections, session maintenance, the three-way handshake, TCP sliding windows, TCP segments, UDP segments, port numbers, FTP, URLs, email messaging, SNMP, and Telnet. The presentation is intended for instructors to modify for their own use, and not as a study guide for assessments.

CCNAv5 - S1: Chapter 4 - Network Access

Universitas Teknokrat Indonesia

This chapter discusses network access and connectivity. It covers the physical layer, including different cabling media like copper, fiber optic and wireless. It then discusses the data link layer, including common standards, frame structure, logical vs physical topologies for LANs and WANs, and different media access control methods. The objectives are to understand device connectivity options, physical and data link layer functions, select appropriate media, and describe common protocols and standards.

Chapter 04 - Network Access

Yaser Rahmati

Chapter 4 : Network access

teknetir

CCNA (R & S) Module 01 - Introduction to Networks - Chapter 4

Waqas Ahmed Nawaz

This document is from a Cisco networking textbook. It covers network access and includes sections on physical layer protocols, network media, data link layer protocols, and media access control. The physical layer accepts frames from the data link layer and encodes them for transmission on different media types. Common network cabling includes copper-based options like UTP and coaxial, as well as fiber-optic cabling. Wireless media also allows for radio-based networking. The data link layer prepares frames for transmission and defines media access. Different methods like CSMA/CD are used depending on the topology and media.

Itn instructor ppt_chapter4_network_access

The document discusses network access and connectivity. It covers physical layer protocols, network media like copper, fiber and wireless, data link layer protocols, and media access control techniques. Specific topics covered include Ethernet, Wi-Fi, physical and logical network topologies, common network cabling standards, and frame structure. The goal is for students to understand how networks are accessed at the data link layer and below.

Itn instructor ppt_chapter4_network_access

bebe tampan

CCNA RS_NB - Chapter 3

This document summarizes a chapter about network protocols and communications. It discusses how protocols establish communication rules and standards organizations develop protocols through processes like RFCs. It also describes how data is encapsulated when moving through networks and OSI and TCP/IP models for conceptualizing network layers. Specific topics covered include protocol suites, addressing, data encapsulation, accessing local and remote network resources, and standards bodies.

CCNA RS_NB - Chapter 9

This chapter discusses network access and the data link layer. It covers topics like media access control techniques, common network topologies, frame structure, and physical layer standards and media. The objectives are for students to understand how the data link layer supports communication across networks and the role of the physical layer in this process. Key concepts covered include Ethernet, wireless networks, fiber optic and copper cabling, and an overview of data link layer frame structure.

Cisco CCNA module 1

This document covers topics related to networking and connecting to the internet, including requirements for an internet connection, network interface cards, installing modems and NICs, high-speed and dial-up connectivity, TCP/IP configuration, testing connectivity with ping, binary and hexadecimal numbering systems, IP addresses, and network masks. The document contains sections on PC basics, networking fundamentals, and configuring hardware and software to establish an internet connection.

Ccna1v31 mod01

Agus Junam

This PowerPoint presentation covers the key topics and objectives for the CCNA 1 v3.1 Module 1 on introduction to networking. It provides instructions for instructors to locate instructional resources and includes slides on PC basics, network interface cards, TCP/IP configuration, IP addressing, binary and hexadecimal number systems, and networking troubleshooting. The presentation is intended for instructors to modify for their own use in teaching the module and is not a study guide for assessments.

Similar to Ccna1v31 mod03 (20)

Ccna1v31 mod04

Ccna1v31 mod09

Ccna1v31 mod01

Ccna1v31 mod07

Ccna

CCNA 1 Routing and Switching v5.0 Chapter 4

Ccna1v3.1 mod02

CCNA RS_ITN - Chapter 4

Ccna1v31 mod11

CCNAv5 - S1: Chapter 4 - Network Access

Chapter 04 - Network Access

Chapter 4 : Network access

CCNA (R & S) Module 01 - Introduction to Networks - Chapter 4

Itn instructor ppt_chapter4_network_access

CCNA RS_NB - Chapter 3

CCNA RS_NB - Chapter 9

Cisco CCNA module 1

Ccna1v31 mod01

More from igede tirtanata

EduDivision-DATACOM NETWORKING

This document provides an introduction to a data communications networking course. It outlines the course schedule which covers topics like Ethernet, WAN technologies, IP networking and more over 5 days. It also discusses course materials, prerequisites, and objectives which include gaining an understanding of modern datacom technologies. The document provides details on standardization bodies and the OSI reference model, describing each layer and how data is transmitted through the protocol stack. It also covers physical media types like coaxial cable, twisted pair, fiber and their characteristics. Standards for physical layer interfaces like RS-232, RS-422 and V-series are also introduced.

GSM 3G Basic

This document provides an overview and summary of a training course on Agenda, GSM & MPA. The course agenda covers definitions and history of GSM, GSM services, system architecture including components like the HLR, VLR, BTS, BSC and MSC. It also discusses the GSM functional model including call management, mobility management and radio resource management. The document then summarizes the GSM radio interface, protocols like DTAP and interfaces like A-bis and A. It provides high-level descriptions of GSM standards and evolution over time.

iSeries IBM

E wallet nfc service payment

The document describes an e-wallet application that allows users to make payments using Near Field Communication (NFC) technology on Android smartphones. It discusses how the application works, including user registration and login, adding payment balances by activating vouchers, and making expenditures by scanning NFC tags on smart posters. The application transfers user and transaction data between the smartphone app and a web server for validation. The document also evaluates the application's performance and network usage, finding that data reception uses more bandwidth than transmission and that internet connectivity was the main constraint reported by users. It concludes by recommending a focus on security and expanding platform support for broader use.

Cisco discovery drs ent module 8 - v.4 in english.

The document contains questions and answers about configuring and applying access control lists (ACLs) on routers. Some key points: - ACL entries are assigned sequence numbers, with new entries added at the end by default. - Inbound ACLs are more efficient than outbound ACLs as they can deny packets before routing lookups. - ACLs can be used to filter traffic, specify NAT source addresses, and identify traffic for QoS among other uses. - Standard ACLs filter based on source address only while extended ACLs can filter on additional fields and factors.

Cisco discovery drs ent module 5 - v.4 in english.

The document is a set of 20 multiple choice questions about networking concepts like VLSM, NAT, CIDR, and subnetting. Some of the questions ask about the maximum number of subnets that can be created from a specific subnet, the purpose of address overloading in NAT, the advantages of CIDR, how a router implements NAT overload, and characteristics of classful routing protocols. Other questions provide exhibits with network diagrams and ask about global vs local NAT addresses, valid subnet masks, summarized network ranges, and valid subnet addresses.

Cisco discovery drs ent module 3 - v.4 in english.

The document contains questions and answers about networking concepts like VLANs, trunking, VTP, and STP. Some key points: - A router can connect VLANs on a switch using a trunk port and subinterfaces for each VLAN. - VTP is used to maintain VLAN configuration consistency across switches in the same management domain and mode. - STP elects a root bridge and puts switch ports into blocking, listening, learning, or forwarding states to prevent loops.

Cisco discovery drs ent module 4 - v.4 in english.

The document is a set of 20 multiple choice questions about networking topics such as VLSM, NAT, CIDR, and routing protocols. Some of the questions ask about subnetting a network, the purpose of NAT overload, advantages of CIDR, how routers track addresses for NAT overload, characteristics of classful routing protocols, identifying inside and outside addresses in a NAT configuration, summarizing networks using CIDR, VLSM addressing schemes, appropriate subnet masks, available addresses in subnet configurations, routing updates sent with RIP v2, ranges of networks summarized by an address/mask, identifying the type of NAT based on translation output, available addresses for dynamic NAT pools, valid host addresses in a subnet, network/broadcast addresses in a subnet

Cisco discovery drs ent module 6 - v.4 in english.

Cisco discovery drs ent module 7 - v.4 in english.

This document contains 24 multiple choice questions about network control protocols, data transmission rates, differences between LANs and WANs, Cisco's implementation of HDLC, connectivity problems, output of debug commands, functions of PPP, demarcation points, congestion indicators, time-division multiplexing, types of WAN connections, data communications equipment, encapsulation processes, and functions of LCP and cell switching. It provides information to test knowledge of fundamental networking concepts related to protocols, interfaces, addressing, and virtual circuits.

Cisco discovery drs ent module 10 - v.4 in english.

This document contains multiple choice questions about networking topics such as VLANs, ACLs, routing protocols, and WAN technologies. Question 1 asks about the VTP mode that allows a switch to create VLANs and ignore VTP messages without passing local VLAN information. Question 2 asks about characteristics of extended ACLs. Question 3 asks about statements that are true regarding a PPP connection between two Cisco routers.

Cisco discovery d homesb module 10 final exam - v.4 in english.

Cisco discovery d homesb module 7 - v.4 in english.

The document contains 20 multiple choice questions about wireless networking technologies including IEEE 802.11, Bluetooth, Wi-Fi, WLAN components, wireless security, encryption, authentication methods, and wireless network configuration options. It tests knowledge of key topics such as the differences between wireless and wired networking, factors that influence wireless network setup and performance, and common wireless network security standards and protocols.

Cisco discovery d homesb module 7 - v.4 in english.

The document contains 20 multiple choice questions about wireless networking technologies including IEEE 802.11, Bluetooth, Wi-Fi, WLAN components, wireless security, encryption, authentication, and common configuration options. It tests knowledge of the key differences between wireless and wired networking, factors that influence wireless network setup and performance, and security best practices.

Cisco discovery d homesb module 10 final exam - v.4 in english.

Ccna1v3 mod11

Ccna1v3 mod10

This document provides an overview of routing fundamentals and subnetting in CCNA version 3.0. It discusses routed and routing protocols, how IP acts as a routed protocol, routing tables, routing algorithms and metrics, and the mechanics of subnetting including establishing subnet masks and calculating subnetworks through ANDing. The objectives are to understand routed protocols, IP routing protocols, and the mechanics of subnetting.

Ccna1v3 mod09

Ccna1v3 mod08

This PowerPoint provides targets and objectives for CCNA 1 v3.0 Module 8 on Ethernet Switching. It is intended for instructors to modify for their own use, and is not a study guide for assessments or certification exams. The document outlines key topics covered in the module like collision domains, broadcast domains, switch operation modes, spanning tree protocol states, and how switches segment broadcast domains to reduce broadcast traffic.

Ccna1v3 mod03