This document discusses the design of one-way reinforced concrete slabs. It defines one-way slabs as slabs supported on two opposite sides where loads are transferred in the short direction. The strip method is used to analyze one-way slabs by considering a unit strip with a width of one unit and a depth equal to the slab thickness. The document reviews ACI code specifications for one-way slab design including minimum thickness, bar spacing, reinforcement ratios, and moment coefficients. Sample problems are provided to demonstrate the design of one-way slabs using working stress design.
The document provides an overview of one-way slab design. It defines one-way slabs as having an aspect ratio of 2:1 or greater, with bending primarily in one direction. Types of one-way slabs include solid, hollow, and ribbed slabs. The document discusses applications of the L/B ratio, loading conditions, analysis approach by considering strips as beams, and ACI code specifications for one-way slab design including minimum thickness, reinforcement ratios, and an example problem solution.
This presentation summarizes the key aspects of one-way slab design:
1) One-way slabs have an aspect ratio of 2:1 or greater, where bending occurs primarily along the long axis. They can be solid, hollow, or ribbed.
2) Design and analysis treats a unit strip of the slab as a rectangular beam of unit width and the slab thickness as the depth.
3) The ACI code specifies minimum slab thickness, concrete cover, span length, bar spacing, reinforcement ratios, and other design requirements.
4) An example problem demonstrates the design process, calculating loads, moments, minimum reinforcement, and checking the proposed slab thickness.
5) One-
This presentation summarizes the key aspects of one-way slab design. It defines one-way slabs as having an aspect ratio of 2:1 or greater, with bending primarily along the long axis. The presentation discusses the types of one-way slabs including solid, hollow, and ribbed. It also outlines the design considerations for one-way slabs according to the ACI code, including minimum thickness, reinforcement ratios, and bar spacing. An example problem demonstrates how to design a one-way slab for a given set of loading and dimensional conditions.
1) One-way slabs are reinforced concrete slabs that are primarily supported on two sides and bending occurs mainly in one direction.
2) They have an aspect ratio of length to width of 2:1 or greater. One-way slabs can be solid, hollow, or ribbed.
3) The ACI code provides specifications for one-way slab design including minimum thickness, concrete cover, span length, bar spacing, reinforcement ratios, and design examples.
This document provides details on the design of a continuous one-way reinforced concrete slab. It includes minimum thickness requirements, equations for calculating moments and shear, maximum reinforcement ratios, and minimum reinforcement ratios. An example is then provided to demonstrate the design process. The slab is designed to have a thickness of 6 inches with 0.39 in2/ft of tension reinforcement in the negative moment region and 0.33 in2/ft in the positive moment region.
This document discusses the design of one-way slabs. It begins by defining one-way slabs as slabs that are supported on two opposite sides and carry loads in the perpendicular direction. The document then provides details on: the analysis of one-way slabs as series of 1-foot wide beam strips; typical reinforcement including main tension bars and shrinkage/temperature bars; minimum thickness requirements in the ACI code; and design procedures including selecting design strips, calculating loads, drawing shear and moment diagrams, and determining reinforcement ratios. Examples are provided for reinforcement spacing, minimum cover, and designing a one-way slab.
The document provides an overview of one-way slab design. It defines one-way slabs as having an aspect ratio of 2:1 or greater, with bending primarily in one direction. Types of one-way slabs include solid, hollow, and ribbed slabs. The document discusses applications of the L/B ratio, loading conditions, analysis approach by considering strips as beams, and ACI code specifications for one-way slab design including minimum thickness, reinforcement ratios, and an example problem solution.
This presentation summarizes the key aspects of one-way slab design:
1) One-way slabs have an aspect ratio of 2:1 or greater, where bending occurs primarily along the long axis. They can be solid, hollow, or ribbed.
2) Design and analysis treats a unit strip of the slab as a rectangular beam of unit width and the slab thickness as the depth.
3) The ACI code specifies minimum slab thickness, concrete cover, span length, bar spacing, reinforcement ratios, and other design requirements.
4) An example problem demonstrates the design process, calculating loads, moments, minimum reinforcement, and checking the proposed slab thickness.
5) One-
This presentation summarizes the key aspects of one-way slab design. It defines one-way slabs as having an aspect ratio of 2:1 or greater, with bending primarily along the long axis. The presentation discusses the types of one-way slabs including solid, hollow, and ribbed. It also outlines the design considerations for one-way slabs according to the ACI code, including minimum thickness, reinforcement ratios, and bar spacing. An example problem demonstrates how to design a one-way slab for a given set of loading and dimensional conditions.
1) One-way slabs are reinforced concrete slabs that are primarily supported on two sides and bending occurs mainly in one direction.
2) They have an aspect ratio of length to width of 2:1 or greater. One-way slabs can be solid, hollow, or ribbed.
3) The ACI code provides specifications for one-way slab design including minimum thickness, concrete cover, span length, bar spacing, reinforcement ratios, and design examples.
This document provides details on the design of a continuous one-way reinforced concrete slab. It includes minimum thickness requirements, equations for calculating moments and shear, maximum reinforcement ratios, and minimum reinforcement ratios. An example is then provided to demonstrate the design process. The slab is designed to have a thickness of 6 inches with 0.39 in2/ft of tension reinforcement in the negative moment region and 0.33 in2/ft in the positive moment region.
This document discusses the design of one-way slabs. It begins by defining one-way slabs as slabs that are supported on two opposite sides and carry loads in the perpendicular direction. The document then provides details on: the analysis of one-way slabs as series of 1-foot wide beam strips; typical reinforcement including main tension bars and shrinkage/temperature bars; minimum thickness requirements in the ACI code; and design procedures including selecting design strips, calculating loads, drawing shear and moment diagrams, and determining reinforcement ratios. Examples are provided for reinforcement spacing, minimum cover, and designing a one-way slab.
This document discusses the design of one-way slabs. It begins by defining one-way slabs as slabs that are supported on two opposite sides and carry loads perpendicularly to the supporting beams. The document then outlines the design process, which involves analyzing representative strips of the slab as simple beams and determining reinforcement ratios. Key steps include checking deflection, calculating factored loads, drawing shear and moment diagrams, and selecting reinforcement sizes that satisfy the required ratios. Examples of one-way slab design and the minimum requirements for thickness, reinforcement ratios, and cover are also provided.
This document discusses the design of reinforced concrete slabs. It begins by introducing different types of slabs used in construction like solid slabs, flat slabs, ribbed slabs, and waffle slabs. It then covers simplified analysis methods for slabs spanning in one or two directions using load and moment coefficients. The document also addresses shear design in slabs, discussing shear stresses and the need for shear reinforcement. It concludes by discussing punching shear analysis around concentrated loads and the importance of limiting span-depth ratios to control deflections in slabs.
- The document describes the design and detailing of flat slabs, which are concrete slabs supported directly by columns without beams.
- Key aspects covered include dimensional considerations, analysis methods, design for bending moments including division of panels and limiting negative moments, shear design and punching shear, deflection and crack control, and design procedures.
- An example problem is provided to illustrate the full design process for an internal panel with drops adjacent to edge panels.
1. The document discusses the design of one-way reinforced concrete slabs according to Indian code IS 456:2000.
2. It defines one-way slabs as edge supported slabs spanning in one direction with a ratio of long to short span greater than or equal to 2.
3. The main considerations for slab design discussed are effective span, deflection control, reinforcement requirements including minimum area, maximum bar diameter and cover, and load calculations.
This document discusses the design of column base plates and steel anchorage to concrete. It provides an introduction to base plates and anchor rods, including materials and design considerations. It then covers the design of base plates for different load cases such as axial load, axial load plus moment, and axial load plus shear. Finally, it discusses the design of anchor rods for tension and shear loading based on the requirements in the ACI 318 code. The design procedures aim to ensure adequate load transfer from the steel column to the concrete foundation.
This document summarizes design considerations for shear in reinforced concrete structures. It discusses shear strength provided by concrete alone (Vc), shear strength provided by shear reinforcement (Vs), and methods for calculating total shear strength (Vn). It also covers requirements for shear reinforcement spacing and minimum amounts. Design aids are presented for calculating shear capacity of beams, slabs, and members under combined shear and torsion.
This document discusses the design of flat slab structures with and without slab drops. It begins with an introduction to flat slabs and their components. It then outlines the design methodology and considerations. The main body compares the bending moments and steel requirements for interior and exterior panels of flat slabs without drops and with drops, for slab sizes of 20x20m, 40x40m, and 60x60m. The key findings are that flat slabs without drops require less steel in the middle strips compared to flat slabs with drops, but flat slabs with drops have lower bending moments and steel requirements in the column strips.
This document summarizes the key components and design process of flat slab construction without slab drops. It provides examples of designing interior and exterior panels of sizes 5x5m, 10x10m, and 15x15m for a 20x20m flat slab without drops. The design process involves determining slab depth, load calculations, moment distribution, and reinforcement sizing. Tables are included that show bending moments and steel areas for column strips and middle strips of the example panels. Interior panels have negative and positive moments in both directions while exterior panels only have negative moments in the column strip and positive moments in the middle strip.
This document provides information on the design of reinforced concrete columns, including:
- Columns transmit loads vertically to foundations and may resist both compression and bending. Common cross-sections are square, circular and rectangular.
- Columns are classified as braced or unbraced depending on lateral stability, and short or slender based on buckling resistance. Short column design considers axial load capacity while slender column design accounts for second-order effects.
- Reinforcement details include minimum longitudinal bar size and spacing and design of lateral ties. Slender column design determines loadings and calculates moments from stiffness, deflection and biaxial bending effects. Design charts are used to select reinforcement for columns under axial and uniaxial
The document discusses flat slab construction and design. It begins by defining a flat slab as a reinforced concrete slab without beams that transfers loads directly to supporting columns. It describes various types of flat slabs including simple flat slabs, those with drop panels or column heads, or both. The document outlines design considerations for flat slabs including analyzing column and middle strips, estimating depth, and calculating moments and shear. It also discusses advantages such as reduced height and construction time. In summary, the document provides information on flat slab types, design methodology, and benefits compared to other construction methods.
This document provides a summary of reinforced concrete columns (RCC columns). It defines a column and describes different types of columns based on reinforcement and length. Short columns are less than 12 times the minimum thickness, while long columns are greater than 12 times the thickness. The document outlines preliminary sizing of columns and the functions of tie/spiral reinforcement. It includes design equations for axially loaded columns in working stress design (WSD) and ultimate stress design (USD). Two sample problems are worked through demonstrating column design using both methods.
The document discusses the design requirements for lacing, battening, and column bases according to IS 800-2007. It provides details on:
- Two types of lacing systems - single and double
- Design requirements for lacing including angle of inclination, slenderness ratio, effective lacing length, bar width and thickness
- Design of battening including number of battens, spacing, thickness, effective depth, and transverse shear
- Minimum thickness requirements for rectangular slab column bases
It also provides an example problem demonstrating the design of a slab base foundation for a column.
The document summarizes the design procedures for slab systems according to the ACI 318 Code, including:
1) The direct design method and equivalent frame method for determining moments at critical sections.
2) Distributing the total design moment between positive and negative moments.
3) Distributing moments laterally between column strips, middle strips, and beams.
4) A 5-step basic design procedure involving determining moments, distributing moments, sizing reinforcement, and designing beams if present.
A column is a vertical structural member subjected to compression and bending forces. Short columns fail through crushing or splitting, while slender columns fail through buckling. The document provides examples of calculating required reinforcement area and diameter for a short reinforced concrete column. It also provides examples of calculating the critical buckling load of a rod and determining a suitable universal column section for a given load based on its effective length and slenderness ratio.
The document discusses guidelines for detailing reinforcement in concrete structures. It begins by defining detailing as the preparation of working drawings showing the size and location of reinforcement. Good detailing ensures reinforcement and concrete interact efficiently. The document then discusses sources of tension in concrete structures from various loading conditions like bending, shear, and connections. It provides equations from AS3600-2009 for calculating minimum development lengths for reinforcing bars to develop their yield strength based on bar size, concrete strength, and transverse reinforcement. It also discusses lap splice requirements. In summary, the document provides best practice guidelines for detailing reinforcement to efficiently resist loads and control cracking in concrete structures.
This document discusses two-way slabs, which deform in two orthogonal directions and require reinforcement in both directions. It describes different types of two-way slabs and analyzes one-way versus two-way slab action. Methods of analysis including Westergaard's theory and Rankine-Grashoff method are covered. Design procedures are provided for reinforced concrete two-way slabs based on Indian code IS 456, including equations to calculate bending moments and requirements for reinforcement.
This presentation summarizes information about reinforced concrete columns. It was presented by a group of 9 students from the Department of Civil Engineering at Dhaka University of Engineering & Technology to faculty members. The presentation defines columns, classifies columns based on shape, reinforcement, and loading, and describes the effective length, buckling modes, sizing, reinforcement, cover, lapping, hoop reinforcement, and failure modes of columns. The objectives are to understand column arrangement, design specifications, and characteristics.
Revolutionizing Surface Protection Xlcoatings Nano Based SolutionsExcel coatings
Excelcoating Transforming surface protection with their cutting-edge, eco-friendly nano-based coatings. This presentation delves into their innovative product lineup, including Excel CoolCoat for roof cooling, Excel NanoSeal for cement surfaces, Excel StayCool for UV-filtering glass, Excel StayClean for solar panels, Excel CoolTile for heat-reflective tiles, and Excel InsulX for film insulation.
japanese language course in delhi near meheyfairies7
Next is the Nihon Language Academy in East Delhi, renowned for its comprehensive curriculum and interactive teaching methods. They boast a faculty of experienced educators with a blend of both Indian and Japanese nationals. The academy provides extensive support for JLPT exam preparation along with personalized tutoring sessions if needed. Nihon Language Academy also arranges exchange programs with partner institutes in Japan, which provides students an opportunity to experience Japanese culture and language first-hand.
This document discusses the design of one-way slabs. It begins by defining one-way slabs as slabs that are supported on two opposite sides and carry loads perpendicularly to the supporting beams. The document then outlines the design process, which involves analyzing representative strips of the slab as simple beams and determining reinforcement ratios. Key steps include checking deflection, calculating factored loads, drawing shear and moment diagrams, and selecting reinforcement sizes that satisfy the required ratios. Examples of one-way slab design and the minimum requirements for thickness, reinforcement ratios, and cover are also provided.
This document discusses the design of reinforced concrete slabs. It begins by introducing different types of slabs used in construction like solid slabs, flat slabs, ribbed slabs, and waffle slabs. It then covers simplified analysis methods for slabs spanning in one or two directions using load and moment coefficients. The document also addresses shear design in slabs, discussing shear stresses and the need for shear reinforcement. It concludes by discussing punching shear analysis around concentrated loads and the importance of limiting span-depth ratios to control deflections in slabs.
- The document describes the design and detailing of flat slabs, which are concrete slabs supported directly by columns without beams.
- Key aspects covered include dimensional considerations, analysis methods, design for bending moments including division of panels and limiting negative moments, shear design and punching shear, deflection and crack control, and design procedures.
- An example problem is provided to illustrate the full design process for an internal panel with drops adjacent to edge panels.
1. The document discusses the design of one-way reinforced concrete slabs according to Indian code IS 456:2000.
2. It defines one-way slabs as edge supported slabs spanning in one direction with a ratio of long to short span greater than or equal to 2.
3. The main considerations for slab design discussed are effective span, deflection control, reinforcement requirements including minimum area, maximum bar diameter and cover, and load calculations.
This document discusses the design of column base plates and steel anchorage to concrete. It provides an introduction to base plates and anchor rods, including materials and design considerations. It then covers the design of base plates for different load cases such as axial load, axial load plus moment, and axial load plus shear. Finally, it discusses the design of anchor rods for tension and shear loading based on the requirements in the ACI 318 code. The design procedures aim to ensure adequate load transfer from the steel column to the concrete foundation.
This document summarizes design considerations for shear in reinforced concrete structures. It discusses shear strength provided by concrete alone (Vc), shear strength provided by shear reinforcement (Vs), and methods for calculating total shear strength (Vn). It also covers requirements for shear reinforcement spacing and minimum amounts. Design aids are presented for calculating shear capacity of beams, slabs, and members under combined shear and torsion.
This document discusses the design of flat slab structures with and without slab drops. It begins with an introduction to flat slabs and their components. It then outlines the design methodology and considerations. The main body compares the bending moments and steel requirements for interior and exterior panels of flat slabs without drops and with drops, for slab sizes of 20x20m, 40x40m, and 60x60m. The key findings are that flat slabs without drops require less steel in the middle strips compared to flat slabs with drops, but flat slabs with drops have lower bending moments and steel requirements in the column strips.
This document summarizes the key components and design process of flat slab construction without slab drops. It provides examples of designing interior and exterior panels of sizes 5x5m, 10x10m, and 15x15m for a 20x20m flat slab without drops. The design process involves determining slab depth, load calculations, moment distribution, and reinforcement sizing. Tables are included that show bending moments and steel areas for column strips and middle strips of the example panels. Interior panels have negative and positive moments in both directions while exterior panels only have negative moments in the column strip and positive moments in the middle strip.
This document provides information on the design of reinforced concrete columns, including:
- Columns transmit loads vertically to foundations and may resist both compression and bending. Common cross-sections are square, circular and rectangular.
- Columns are classified as braced or unbraced depending on lateral stability, and short or slender based on buckling resistance. Short column design considers axial load capacity while slender column design accounts for second-order effects.
- Reinforcement details include minimum longitudinal bar size and spacing and design of lateral ties. Slender column design determines loadings and calculates moments from stiffness, deflection and biaxial bending effects. Design charts are used to select reinforcement for columns under axial and uniaxial
The document discusses flat slab construction and design. It begins by defining a flat slab as a reinforced concrete slab without beams that transfers loads directly to supporting columns. It describes various types of flat slabs including simple flat slabs, those with drop panels or column heads, or both. The document outlines design considerations for flat slabs including analyzing column and middle strips, estimating depth, and calculating moments and shear. It also discusses advantages such as reduced height and construction time. In summary, the document provides information on flat slab types, design methodology, and benefits compared to other construction methods.
This document provides a summary of reinforced concrete columns (RCC columns). It defines a column and describes different types of columns based on reinforcement and length. Short columns are less than 12 times the minimum thickness, while long columns are greater than 12 times the thickness. The document outlines preliminary sizing of columns and the functions of tie/spiral reinforcement. It includes design equations for axially loaded columns in working stress design (WSD) and ultimate stress design (USD). Two sample problems are worked through demonstrating column design using both methods.
The document discusses the design requirements for lacing, battening, and column bases according to IS 800-2007. It provides details on:
- Two types of lacing systems - single and double
- Design requirements for lacing including angle of inclination, slenderness ratio, effective lacing length, bar width and thickness
- Design of battening including number of battens, spacing, thickness, effective depth, and transverse shear
- Minimum thickness requirements for rectangular slab column bases
It also provides an example problem demonstrating the design of a slab base foundation for a column.
The document summarizes the design procedures for slab systems according to the ACI 318 Code, including:
1) The direct design method and equivalent frame method for determining moments at critical sections.
2) Distributing the total design moment between positive and negative moments.
3) Distributing moments laterally between column strips, middle strips, and beams.
4) A 5-step basic design procedure involving determining moments, distributing moments, sizing reinforcement, and designing beams if present.
A column is a vertical structural member subjected to compression and bending forces. Short columns fail through crushing or splitting, while slender columns fail through buckling. The document provides examples of calculating required reinforcement area and diameter for a short reinforced concrete column. It also provides examples of calculating the critical buckling load of a rod and determining a suitable universal column section for a given load based on its effective length and slenderness ratio.
The document discusses guidelines for detailing reinforcement in concrete structures. It begins by defining detailing as the preparation of working drawings showing the size and location of reinforcement. Good detailing ensures reinforcement and concrete interact efficiently. The document then discusses sources of tension in concrete structures from various loading conditions like bending, shear, and connections. It provides equations from AS3600-2009 for calculating minimum development lengths for reinforcing bars to develop their yield strength based on bar size, concrete strength, and transverse reinforcement. It also discusses lap splice requirements. In summary, the document provides best practice guidelines for detailing reinforcement to efficiently resist loads and control cracking in concrete structures.
This document discusses two-way slabs, which deform in two orthogonal directions and require reinforcement in both directions. It describes different types of two-way slabs and analyzes one-way versus two-way slab action. Methods of analysis including Westergaard's theory and Rankine-Grashoff method are covered. Design procedures are provided for reinforced concrete two-way slabs based on Indian code IS 456, including equations to calculate bending moments and requirements for reinforcement.
This presentation summarizes information about reinforced concrete columns. It was presented by a group of 9 students from the Department of Civil Engineering at Dhaka University of Engineering & Technology to faculty members. The presentation defines columns, classifies columns based on shape, reinforcement, and loading, and describes the effective length, buckling modes, sizing, reinforcement, cover, lapping, hoop reinforcement, and failure modes of columns. The objectives are to understand column arrangement, design specifications, and characteristics.
Revolutionizing Surface Protection Xlcoatings Nano Based SolutionsExcel coatings
Excelcoating Transforming surface protection with their cutting-edge, eco-friendly nano-based coatings. This presentation delves into their innovative product lineup, including Excel CoolCoat for roof cooling, Excel NanoSeal for cement surfaces, Excel StayCool for UV-filtering glass, Excel StayClean for solar panels, Excel CoolTile for heat-reflective tiles, and Excel InsulX for film insulation.
japanese language course in delhi near meheyfairies7
Next is the Nihon Language Academy in East Delhi, renowned for its comprehensive curriculum and interactive teaching methods. They boast a faculty of experienced educators with a blend of both Indian and Japanese nationals. The academy provides extensive support for JLPT exam preparation along with personalized tutoring sessions if needed. Nihon Language Academy also arranges exchange programs with partner institutes in Japan, which provides students an opportunity to experience Japanese culture and language first-hand.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian MatkaKALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Satta Matta Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143
Easy Earnings Through Refer and Earn Apps Without KYC.pptxFx Lotus
Learn how to make extra money with refer and earn apps that don’t require KYC. Find out the advantages, top apps, and strategies to boost your earnings quickly and easily.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Enhancing Adoption of AI in Agri-food: IntroductionCor Verdouw
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
1. Department of Civil and Environmental
Engineering
Course code: CEE 403A
Course Title: Structure V (Reinforced Concrete Design)
Sourav Ray
Assistant Professor
Department of Civil & Environmental Engineering
SUST, Sylhet.
Email: sourav.ceesust@gmail.com
1
9. In first figure slab is
supported on two opposite
sides only. In this case the
structural action of the slab
is essentially one way.
In second figure there are
beams on all four sides with
a intermediate beam. Now if
length to width ratio is 2 or
greater, slab is one way even
though supports are
provided on all sides.
9
10. One way slab is assumed if ratio of side panels is
greater than 2. Loads are assumed to transfer in
the short direction.
10
11. LOADING OF ONE WAY SLAB
When slabs are supported
on two opposite sides only
loads being carried by the
slab in the direction
perpendicular to the
supporting beams.
When supports are provided on
all sides most of the load is
carried in the short direction to
the supporting beams and one
way action is obtained.
11
12. So finally we can conclude one-way slab as……………..
12
13. Strip Method of Analysis for One-way Slabs
• For purpose of analysis and design a
unit strip of such a slab is cut out ,
which may be considered as a
rectangular beam of unit width (say 1ft
or 1m) with a depth ‘h’ equal to the
thickness of the slab and a span ‘la’
equal to the distance between
supported edges.
• The strip can be analyzed by the
methods that were used for
rectangular beams.
13
18. The ACI code specifies the minimum thickness in the following table
For all slabs of normal weight concrete unless calculation of deflection
proves that lesser thickness may be used without adverse effect.
MINIMUM SLAB THICKNESS
In WSD
Nilson book (7th edition)pp-190
18
20. SPAN
According to ACI code 8.7.1
If the slab rests freely on its
supports the span length
may be taken equal to the
clear span plus the depth of
the slab but need not exceed
the distance between
centers of supports .
BAR SPACING
The lateral spacing of the
flexural bars should not
exceed 3 times the
thickness h or 18 inch
according to ACI code 7.6.5
The lateral spacing of
temperature and shrinkage
reinforcement should not
be placed farther apart than
5 times the slab thickness
or 18 inch according to ACI
code 7.12.2
20
23. MINIMAM REINFORCEMENT RATIO
For temperature and shrinkage reinforcement :
According to ACI Code 7.12.2.1
Slabs with Grade 40 or 50 deformed bars…………. 0.0020
Slabs with Grade 60 deformed bars …………………. 0.0018
Slabs where reinforcement with yield strength
Exceeding 60000 psi …………………………………….....
For flexural reinforcement :
According to ACI Code 10.5.4,
the minimum flexural reinforcement is not to be less than the
shrinkage
reinforcement, or 0.0018
23
34. Nilson 7th edition
Considering both way continuous
(see slide #27 for clarification)
**just an assumption here but the real
case can be different.
See the next slide for explanation of
real situation
EXAMPLE PROBLEM-Slab Design by WSD
34
35. 35
Real case: how to select slab thickness
Slab thickness for every individual
span should be calculated and the
maximum of these values will be
taken as the slab thickness
43. 43
•Selection of reinforcing bars
from amount of reinforcement
is exactly similar to the case of
WSD problem
•Follow the previous problem
and find out size and number of
reinforcing bar. Also find the
amount of extra bars needed
if necessary.
雅虎竞拍
煤炉代买
paypay商城
乐天二手
日本亚马逊
乐天新品
ZOZOTOWN
