The document provides information about the CCNA certification exam, including the exam number, total marks, duration, passing score, question types, and benefits of obtaining the certification. It also discusses common networking devices, network interface cards, hubs, switches, routers, common network topologies, and the functions of LANs, MANs and WANs. Finally, it introduces the OSI model and its seven layers.
A PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
El documento describe el modelo OSI, que consta de 7 capas que definen el proceso de transmisión de datos a través de una red. La capa física se encarga de los aspectos físicos y eléctricos de la transmisión. Las capas superiores se encargan de funciones como el enlace de datos, el enrutamiento, el transporte, el control de sesiones, la presentación y las aplicaciones de usuario.
This document provides an overview of Ethernet in a presentation for a computer networks class. It begins with an introduction to Ethernet and network topologies. The technology section discusses Ethernet standards, frame formats, and cable types. Devices covered include switches, routers, and the differences between them. Applications like firewalls and IP spoofing are also mentioned. The summary reiterates the key topics discussed, including the introduction of Ethernet, technologies and devices, and applications. It also outlines the future of Ethernet, such as vehicular uses and standardizing software-defined networking.
This document discusses layer 2 switching and VLANs. It begins by explaining how switching breaks up large collision domains into smaller ones by creating individual collision domains per switch port. It then discusses how VLANs allow further segmentation of the network by logically grouping ports regardless of their physical location. VLANs create separate broadcast domains to limit broadcast traffic to specific groups of users. The document provides examples of creating, assigning ports to, and deleting VLANs on a switch to segmented the network.
This document is from a Cisco Systems networking textbook. It provides an overview of computer networks, including how networks are used in daily life, the components that make up networks like LANs and WANs, and trends that will impact future networks such as cloud computing and security threats. The chapter objectives are to explain network fundamentals and how networks support communication for small businesses.
The document discusses the OSI model, which is a conceptual model for networking that standardizes communication functions without regard to the underlying technology. It partitions communication systems into 7 abstraction layers, with each layer serving the layer above it. Layer 1 is the physical layer that transmits raw data over a medium. Layer 2 is the data link layer that provides node-to-node transfer and error correction. Layer 3 is the network layer that transfers variable length packets between different networks and can route messages through intermediate nodes.
The document discusses configuring and troubleshooting VLANs on Cisco switches. It describes creating VLANs on a switch, assigning switch ports to VLANs in access mode, and configuring trunk ports. Key steps include using the global config vlan command to create VLANs, the show vlan command to verify configurations, and the switchport mode access and switchport access commands to assign access ports to VLANs. The document also covers VTP modes, extended VLAN ranges, and trunk port configuration options.
CCNA 1 Routing and Switching v5.0 Chapter 6Nil Menon
This document provides an overview of network layer protocols and routing. It discusses how network layer protocols like IP address devices and enable end-to-end transport of data across networks. Routers maintain routing tables to determine the best path between networks and enable connectivity. The document reviews IPv4 and IPv6 packet structures and addresses limitations of IPv4. It also examines how hosts and routers use routing tables to make packet forwarding decisions and describes basic router configurations.
A PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
El documento describe el modelo OSI, que consta de 7 capas que definen el proceso de transmisión de datos a través de una red. La capa física se encarga de los aspectos físicos y eléctricos de la transmisión. Las capas superiores se encargan de funciones como el enlace de datos, el enrutamiento, el transporte, el control de sesiones, la presentación y las aplicaciones de usuario.
This document provides an overview of Ethernet in a presentation for a computer networks class. It begins with an introduction to Ethernet and network topologies. The technology section discusses Ethernet standards, frame formats, and cable types. Devices covered include switches, routers, and the differences between them. Applications like firewalls and IP spoofing are also mentioned. The summary reiterates the key topics discussed, including the introduction of Ethernet, technologies and devices, and applications. It also outlines the future of Ethernet, such as vehicular uses and standardizing software-defined networking.
This document discusses layer 2 switching and VLANs. It begins by explaining how switching breaks up large collision domains into smaller ones by creating individual collision domains per switch port. It then discusses how VLANs allow further segmentation of the network by logically grouping ports regardless of their physical location. VLANs create separate broadcast domains to limit broadcast traffic to specific groups of users. The document provides examples of creating, assigning ports to, and deleting VLANs on a switch to segmented the network.
This document is from a Cisco Systems networking textbook. It provides an overview of computer networks, including how networks are used in daily life, the components that make up networks like LANs and WANs, and trends that will impact future networks such as cloud computing and security threats. The chapter objectives are to explain network fundamentals and how networks support communication for small businesses.
The document discusses the OSI model, which is a conceptual model for networking that standardizes communication functions without regard to the underlying technology. It partitions communication systems into 7 abstraction layers, with each layer serving the layer above it. Layer 1 is the physical layer that transmits raw data over a medium. Layer 2 is the data link layer that provides node-to-node transfer and error correction. Layer 3 is the network layer that transfers variable length packets between different networks and can route messages through intermediate nodes.
The document discusses configuring and troubleshooting VLANs on Cisco switches. It describes creating VLANs on a switch, assigning switch ports to VLANs in access mode, and configuring trunk ports. Key steps include using the global config vlan command to create VLANs, the show vlan command to verify configurations, and the switchport mode access and switchport access commands to assign access ports to VLANs. The document also covers VTP modes, extended VLAN ranges, and trunk port configuration options.
CCNA 1 Routing and Switching v5.0 Chapter 6Nil Menon
This document provides an overview of network layer protocols and routing. It discusses how network layer protocols like IP address devices and enable end-to-end transport of data across networks. Routers maintain routing tables to determine the best path between networks and enable connectivity. The document reviews IPv4 and IPv6 packet structures and addresses limitations of IPv4. It also examines how hosts and routers use routing tables to make packet forwarding decisions and describes basic router configurations.
The document provides an overview of the OSI model and TCP/IP networking model. It describes the seven layers of the OSI model from the physical layer to the application layer and their responsibilities in networking. It also discusses the four layers of the TCP/IP model and compares it to the OSI model. Key protocols like TCP, UDP, IP, Ethernet, and HTTP are explained in their respective layers along with functions like encapsulation and data flow between layers. Network analysis tools like Wireshark are also mentioned.
El protocolo STP (Spanning Tree Protocol) es un protocolo de capa 2 que evita bucles en una red mediante el bloqueo intencional de rutas redundantes. Utiliza el algoritmo STA (Spanning Tree Algorithm) para designar un switch raíz y calcular la ruta más corta hacia él, bloqueando los puertos no necesarios. Define los puertos como raíz, designados o no designados dependiendo de su papel en la transmisión de tráfico hacia la raíz.
This document discusses the TCP/IP protocol suite and its layers. It begins by explaining that the OSI model was developed in 1970 as a networking standard, while TCP/IP was developed prior as a stack of protocols. It then notes that TCP/IP layers correspond to the OSI model layers. The document proceeds to describe some of the key protocols in each TCP/IP layer: application layer protocols include HTTP, FTP, SMTP, and Telnet; transport layer protocols are TCP and UDP; and internet layer protocols comprise IP, ARP, RARP, ICMP, and IGMP. Finally, it states that the host to network layers do not specify any special protocols.
Ethernet was first created by Robert Metcalfe and standardized by IEEE as 802.3. Fast Ethernet (802.3u) transmitted data 10 times faster than standard Ethernet at 100 Mbps while still being backward compatible. Gigabit Ethernet (802.3z) further increased speed to 1000 Mbps and supported full duplex between computers and switches or half duplex between computers and hubs using CSMA/CD. Switched Ethernet uses switches containing plug-in cards to reduce collisions by separating collision domains and allowing parallel transmission between cards.
This document provides an overview of spanning tree protocols and configuration. It examines the purpose of STP in preventing Layer 2 loops and describes the operation of the spanning tree algorithm. Different varieties of STP are covered, including PVST+ and Rapid PVST+. The document also discusses configuring STP modes and parameters like bridge priority and load balancing. Spanning tree concepts are summarized, including port roles, BPDU format, and root path calculation.
This document summarizes network devices and concepts from a CCNA guide. It describes how repeaters, hubs, wireless access points, bridges, switches and routers segment networks and control traffic. It also defines Ethernet, Fast Ethernet and Gigabit Ethernet standards, and explains half and full-duplex communication modes. The summary provides an overview of common network devices and technologies for local area networks.
A MAC address is a 48-bit hardware address that uniquely identifies network interfaces for communication in an Ethernet network. It is stored in the network card's firmware and is usually written as 12 hexadecimal digits separated by hyphens. An IP address is a 32-bit logical address that identifies a device on an IP network and can be configured manually or automatically via DHCP. Private IP address ranges like 10.0.0.0/8 and 192.168.0.0/16 are non-routable and used for local area networks.
OSI Reference Model and TCP/IP (Lecture #3 ET3003 Sem1 2014/2015)Tutun Juhana
This document provides an overview of the OSI model and TCP/IP protocol suite for computer networks. It describes the seven layers of the OSI model from the physical layer to the application layer and their functions. It then explains that while the OSI model was intended as a standard, TCP/IP became dominant in practice. The four layers of the TCP/IP protocol suite are also outlined - the physical and data link layers have no standard protocols, while the network layer uses IP and the transport layer includes TCP and UDP. The application layer combines functions from several OSI layers.
This presentation is about the introduction to network switch layer technology. A network switch is a device tha is used to connect different segments over the network.This ppt includes introduction to switch,types of switches or layer specification,advantages and disadvantages of switch..
I hope it will be very helpful for the engineering students and the others who are interested to search in deep about network switch.
This document provides an overview of the Open Systems Interconnection (OSI) model, which is a conceptual model that characterizes and standardizes the communication functions of a telecommunication or computing system without regard to their underlying internal structure and technology. It describes how data moves from one computer to another networked computer by dividing the tasks involved into 7 smaller layers, with each layer performing a specific communication task and providing services to adjacent layers to reduce complexity. The 7 layers are the physical, data link, network, transport, session, presentation, and application layers.
The document discusses network redundancy and spanning tree protocols. It explains that redundant links between devices provide backup paths in case of failure, but can also cause loops. Spanning tree protocols select the best path and block redundant paths to prevent loops. They dynamically unblock backup paths if the primary path fails to maintain connectivity while avoiding loops.
A
PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
RIP (Routing Information Protocol) is a standard routing protocol that exchanges routing information between gateways and hosts. It works by limiting routes to a maximum of 15 hops to prevent routing loops. There are three versions of RIP: RIP version 1 supports only classful routing; RIP version 2 adds support for VLSM and authentication; and RIPng extends RIP version 2 to support IPv6. RIP has limitations such as a small hop count limit and slow convergence times. It is commonly implemented in Cisco IOS, Junos, and open source routing software.
- The TCP/IP model was created by the Department of Defense to provide reliable networking and data integrity during disasters. It is now the predominant networking model used today.
- The TCP/IP model layers correspond to layers in the OSI model. Key protocols at each TCP/IP layer include IP, TCP, UDP, ARP, and Ethernet at the network/data link layers.
- TCP provides reliable, connection-oriented communications using sequence numbers, acknowledgments, and retransmissions. UDP provides simpler, connectionless delivery without guarantees.
The document discusses network layer concepts including packet switching, IP addressing, and fragmentation. It provides details on:
- Packet switching breaks data into packets that are routed independently and reassembled at the destination. This allows for more efficient use of bandwidth compared to circuit switching.
- IP addresses in IPv4 are 32-bit numbers that identify devices on the network. Addresses are expressed in decimal notation like 192.168.1.1. Fragmentation breaks packets larger than the MTU into smaller fragments for transmission.
The document discusses managing Cisco IOS images and configuring WAN connections. It covers topics such as copying flash images using TFTP, resolving hostnames, password recovery, and configuring encapsulation protocols like HDLC and PPP. Examples are provided for configuring CHAP authentication between two routers connected over a serial link.
Here are the key tasks for initial configuration of a Cisco switch:
- Set the enable and console passwords to secure access to privileged modes. The passwords must be between 4-8 characters.
- Configure the hostname to identify the switch.
- Configure the IP address and subnet mask on VLAN 1 for management access.
- Verify port status and configure basic settings like speed and duplex.
- Configure SNMP, syslog servers for remote monitoring if needed.
- Configure spanning tree protocol for redundancy.
- Save the running configuration to startup for automation on reboot.
- Test connectivity to verify the base configuration is functioning properly.
The document provides an overview of the OSI model and TCP/IP networking model. It describes the seven layers of the OSI model from the physical layer to the application layer and their responsibilities in networking. It also discusses the four layers of the TCP/IP model and compares it to the OSI model. Key protocols like TCP, UDP, IP, Ethernet, and HTTP are explained in their respective layers along with functions like encapsulation and data flow between layers. Network analysis tools like Wireshark are also mentioned.
El protocolo STP (Spanning Tree Protocol) es un protocolo de capa 2 que evita bucles en una red mediante el bloqueo intencional de rutas redundantes. Utiliza el algoritmo STA (Spanning Tree Algorithm) para designar un switch raíz y calcular la ruta más corta hacia él, bloqueando los puertos no necesarios. Define los puertos como raíz, designados o no designados dependiendo de su papel en la transmisión de tráfico hacia la raíz.
This document discusses the TCP/IP protocol suite and its layers. It begins by explaining that the OSI model was developed in 1970 as a networking standard, while TCP/IP was developed prior as a stack of protocols. It then notes that TCP/IP layers correspond to the OSI model layers. The document proceeds to describe some of the key protocols in each TCP/IP layer: application layer protocols include HTTP, FTP, SMTP, and Telnet; transport layer protocols are TCP and UDP; and internet layer protocols comprise IP, ARP, RARP, ICMP, and IGMP. Finally, it states that the host to network layers do not specify any special protocols.
Ethernet was first created by Robert Metcalfe and standardized by IEEE as 802.3. Fast Ethernet (802.3u) transmitted data 10 times faster than standard Ethernet at 100 Mbps while still being backward compatible. Gigabit Ethernet (802.3z) further increased speed to 1000 Mbps and supported full duplex between computers and switches or half duplex between computers and hubs using CSMA/CD. Switched Ethernet uses switches containing plug-in cards to reduce collisions by separating collision domains and allowing parallel transmission between cards.
This document provides an overview of spanning tree protocols and configuration. It examines the purpose of STP in preventing Layer 2 loops and describes the operation of the spanning tree algorithm. Different varieties of STP are covered, including PVST+ and Rapid PVST+. The document also discusses configuring STP modes and parameters like bridge priority and load balancing. Spanning tree concepts are summarized, including port roles, BPDU format, and root path calculation.
This document summarizes network devices and concepts from a CCNA guide. It describes how repeaters, hubs, wireless access points, bridges, switches and routers segment networks and control traffic. It also defines Ethernet, Fast Ethernet and Gigabit Ethernet standards, and explains half and full-duplex communication modes. The summary provides an overview of common network devices and technologies for local area networks.
A MAC address is a 48-bit hardware address that uniquely identifies network interfaces for communication in an Ethernet network. It is stored in the network card's firmware and is usually written as 12 hexadecimal digits separated by hyphens. An IP address is a 32-bit logical address that identifies a device on an IP network and can be configured manually or automatically via DHCP. Private IP address ranges like 10.0.0.0/8 and 192.168.0.0/16 are non-routable and used for local area networks.
OSI Reference Model and TCP/IP (Lecture #3 ET3003 Sem1 2014/2015)Tutun Juhana
This document provides an overview of the OSI model and TCP/IP protocol suite for computer networks. It describes the seven layers of the OSI model from the physical layer to the application layer and their functions. It then explains that while the OSI model was intended as a standard, TCP/IP became dominant in practice. The four layers of the TCP/IP protocol suite are also outlined - the physical and data link layers have no standard protocols, while the network layer uses IP and the transport layer includes TCP and UDP. The application layer combines functions from several OSI layers.
This presentation is about the introduction to network switch layer technology. A network switch is a device tha is used to connect different segments over the network.This ppt includes introduction to switch,types of switches or layer specification,advantages and disadvantages of switch..
I hope it will be very helpful for the engineering students and the others who are interested to search in deep about network switch.
This document provides an overview of the Open Systems Interconnection (OSI) model, which is a conceptual model that characterizes and standardizes the communication functions of a telecommunication or computing system without regard to their underlying internal structure and technology. It describes how data moves from one computer to another networked computer by dividing the tasks involved into 7 smaller layers, with each layer performing a specific communication task and providing services to adjacent layers to reduce complexity. The 7 layers are the physical, data link, network, transport, session, presentation, and application layers.
The document discusses network redundancy and spanning tree protocols. It explains that redundant links between devices provide backup paths in case of failure, but can also cause loops. Spanning tree protocols select the best path and block redundant paths to prevent loops. They dynamically unblock backup paths if the primary path fails to maintain connectivity while avoiding loops.
A
PROJECT REPORT
On
CISCO CERTIFIED NETWORK ASSOCIATE
A computer network, or simply a network, is a collection of computer and other hardware components interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
RIP (Routing Information Protocol) is a standard routing protocol that exchanges routing information between gateways and hosts. It works by limiting routes to a maximum of 15 hops to prevent routing loops. There are three versions of RIP: RIP version 1 supports only classful routing; RIP version 2 adds support for VLSM and authentication; and RIPng extends RIP version 2 to support IPv6. RIP has limitations such as a small hop count limit and slow convergence times. It is commonly implemented in Cisco IOS, Junos, and open source routing software.
- The TCP/IP model was created by the Department of Defense to provide reliable networking and data integrity during disasters. It is now the predominant networking model used today.
- The TCP/IP model layers correspond to layers in the OSI model. Key protocols at each TCP/IP layer include IP, TCP, UDP, ARP, and Ethernet at the network/data link layers.
- TCP provides reliable, connection-oriented communications using sequence numbers, acknowledgments, and retransmissions. UDP provides simpler, connectionless delivery without guarantees.
The document discusses network layer concepts including packet switching, IP addressing, and fragmentation. It provides details on:
- Packet switching breaks data into packets that are routed independently and reassembled at the destination. This allows for more efficient use of bandwidth compared to circuit switching.
- IP addresses in IPv4 are 32-bit numbers that identify devices on the network. Addresses are expressed in decimal notation like 192.168.1.1. Fragmentation breaks packets larger than the MTU into smaller fragments for transmission.
The document discusses managing Cisco IOS images and configuring WAN connections. It covers topics such as copying flash images using TFTP, resolving hostnames, password recovery, and configuring encapsulation protocols like HDLC and PPP. Examples are provided for configuring CHAP authentication between two routers connected over a serial link.
Here are the key tasks for initial configuration of a Cisco switch:
- Set the enable and console passwords to secure access to privileged modes. The passwords must be between 4-8 characters.
- Configure the hostname to identify the switch.
- Configure the IP address and subnet mask on VLAN 1 for management access.
- Verify port status and configure basic settings like speed and duplex.
- Configure SNMP, syslog servers for remote monitoring if needed.
- Configure spanning tree protocol for redundancy.
- Save the running configuration to startup for automation on reboot.
- Test connectivity to verify the base configuration is functioning properly.
Here are the key steps in the IP routing process:
1. Host A checks its ARP table to see if it has the MAC address for Host B's IP address. Since Host B is on a different network, it does not have this information.
2. Host A sends the packet to its default gateway, Router A. The default gateway is the IP address of the router on the same network as Host A.
3. Router A checks its routing table to see how to reach the destination network for Host B. It sees that the next hop for that network is out its E1 interface.
4. Router A forwards the packet out its E1 interface towards Router B.
5. Router B receives
This document provides an overview of the Open Shortest Path First (OSPF) routing protocol. It defines key OSPF concepts like link state advertisements (LSAs), neighbor and topology tables, designated routers (DRs), flooding, shortest path first (SPF) algorithm, and areas. It also compares OSPF to distance vector protocols, describes OSPF network types and neighbor relationships, and provides examples of basic OSPF configuration.
This document provides an overview and introduction to programming with Windows Presentation Foundation (WPF) using XAML. It discusses key WPF concepts like the logical and visual trees, dependency properties, templates, styles, resources, and layouts. It also covers programming with 2D and 3D graphics, data binding, animation, multimedia, and documents. The document recommends resources for getting started with WPF and provides an agenda for the presentation.
De nos jours, la technologie est omniprésente et fait partie intégrante de nos vies. On pense directement aux ordinateurs et aux smartphones, mais elle est également présente dans la plupart de l'électroménager, l'automobile, l'aviation, le nucléaire ou encore l'aérospatiale. De nombreux accidents se sont produits, impliquant de tels systèmes, dont de plus en plus sont liés à des mauvaises interactions entre l'homme et la machine. On peut par exemple repenser aux accidents suivants : Three Mile Island, Therac-25, le vol KAL007... Afin de pouvoir utiliser tous ces systèmes, de manière sûre et fiable afin d’éviter tout risque potentiel d'accidents, il faut pouvoir garantir certaines propriétés sur toutes les interactions possibles entre un système et son opérateur. Cette présentation présente une approche possible pour résoudre le problème de garanties à imposer sur les interactions homme-machine, basée sur les méthodes formelles, le tout illustré par des exemples concrets d'accidents.
The mobile web poses several unique usability challenges for researchers and designers due to characteristics of mobile devices like small screens, low resolution, and unreliable connectivity. Some of the key issues are that mobile users spend more time trying to locate information than browsing due to the impact of low resolution and limited screen sizes, which prevent users from scanning entire pages easily. There is a need for standardization in the mobile web usability process to allow for better comparisons.
2012.09.25 - Local and non-metric similarities between images - why, how and ...Frédéric Morain-Nicolier
The document discusses local and non-metric similarities between images. It outlines that local similarities are needed to compare images and detect small differences. The document proposes using a local dissimilarity map (LDM) approach to quantify local differences between images. The LDM approach involves calculating a distance measure, such as the Hausdorff distance, within a sliding window over the images to identify localized regions of difference. This localized comparison approach could be useful for applications like analyzing ancient printings.
Dans ce cours, on découvre comment construire une interface graphique en Python en utilisant la librairie Tk. Après avoir vu les différents composants de base, ce cours présente la programmation évènementielle qui permet d'écrire du code qui réagit à des évènements comme le clic sur un bouton, par exemple.
Présentation du projet de transmission numérique dans lequel les étudiants sont amenés, en équipes mixtes électroniciens - informaticiens, à développer une application qui, sur base de données collectées par des senseurs, propose une analyse de ces dernières pour fournir un service.
The document discusses using a local dissimilarity measure (LDM) for binary pattern matching. It introduces LDM, which quantifies differences between binary images in a localized manner. LDM is computed from the distance transforms of the two images being compared. The document proposes using LDM as a shape matching technique by calculating the LDM between a reference shape and subsets of a binary image to find the best match location. Initial results suggest LDM provides localized and quantified comparison of images without feature extraction. However, it increases computation time compared to other methods.
This PPT discusses the concept of Dynamic Linker as in Linux and its porting to Solaris ARM platform. It starts from the very basics of linking process
Compression: Video Compression (MPEG and others)danishrafiq
This document provides an overview of video compression techniques used in standards like MPEG and H.261. It discusses how uncompressed video data requires huge storage and bandwidth that compression aims to address. It explains that lossy compression methods are needed to achieve sufficient compression ratios. The key techniques discussed are intra-frame coding using DCT and quantization similar to JPEG, and inter-frame coding using motion estimation and compensation to remove temporal redundancy between frames. Motion vectors are found using techniques like block matching and sum of absolute differences. MPEG and other standards use a combination of these intra and inter-frame coding techniques to efficiently compress video for storage and transmission.
The document provides information about networking certifications and the CCNA exam. It discusses the CCNA exam number, total marks, duration, passing score, number of questions, question types, and benefits of obtaining the certification. It also covers networking topics like data networks, networking devices, network interface cards, hubs, switches, routers, network topologies, LANs, WANs, virtual private networks, bandwidth, internetworking devices, network structure and hierarchy, IEEE 802 standards, and the OSI model.
The document discusses networking concepts such as network topologies, devices, and the OSI model. It begins by explaining how businesses realized networking could increase productivity and save costs. It then describes common networking devices like NICs, hubs, switches, and routers. The document also covers standard network topologies and the layers of the OSI model, providing examples of how data is encapsulated as it travels through each layer.
The document discusses the CCNA certification exam and provides details about its format, benefits, and requirements. It then covers networking concepts like network devices, topologies, protocols, and the OSI model. Key points include that the CCNA exam tests knowledge of networking fundamentals, has multiple choice and simulation questions, and benefits career advancement. It also defines common network components, topologies, and each layer of the OSI model.
The document discusses the CCNA certification exam including details about the exam such as number of questions, duration, passing score, and benefits of obtaining the certification. It also provides information about networking devices, topologies, standards, and the OSI model layers. Key topics covered include switches, routers, network topologies like star and bus, IEEE 802 standards, and an explanation of each of the seven layers of the OSI model.
The document discusses the CCNA certification exam including details about the exam such as number of questions, duration, passing score, and benefits of obtaining the certification. It also provides information about networking devices, topologies, protocols, and the OSI model layers. Key topics covered include switches, routers, network topologies like star and bus, the 7 layers of the OSI model and what each layer is responsible for, and how data is encapsulated as it moves through the layers from physical to application.
The document discusses the CCNA certification exam including details about the exam such as number of questions, duration, passing score, and benefits of obtaining the certification. It also provides an overview of networking concepts including the purpose of networking, networking devices, network interface cards, hubs, switches, routers, network topologies, LANs/WANs, virtual private networks, bandwidth, the OSI model, and IEEE 802 standards.
The document provides information about Cisco certifications including the CCNA exam requirements and benefits, describes common networking devices like hubs, switches, routers and their functions, and explains basic networking concepts such as topologies, protocols, and the layered OSI model which is important for understanding network communication. It covers a wide range of foundational networking topics in preparation for Cisco certification exams.
The document discusses the CCNA certification exam which tests knowledge of networking concepts. The exam is 90 minutes long with 45-55 multiple choice and simulation questions. Candidates must score 849 points or higher to pass. Obtaining the CCNA provides peer validation for personal and potential employer benefits, as well as opportunities for career advancement.
This document provides an overview of networking concepts including networking devices, network interface cards, network topologies, local area networks (LANs), metropolitan area networks (MANs), and wide area networks (WANs). It discusses common networking devices like hubs, switches, routers and their functions. It also explains the OSI reference model and its seven layers - physical, data link, network, transport, session, presentation and application layer.
This document provides an overview of networking concepts including data networks, networking devices, network interface cards, networking device icons, repeaters, hubs, bridges, workgroup switches, routers, network topologies, physical topologies, LANs, WANs, examples of data networks, wireless LAN organizations and standards, cellular topology for wireless, SANs, virtual private networks, bandwidth, measuring bandwidth, the OSI model, data flow through a network, LAN physical layer, Ethernet standards, straight-through and crossover cables, sources of noise on copper media, shielded twisted pair cable, coaxial cable, fiber optic cable, fiber optic connectors, fiber optic patch panels, cable specifications, Ethernet media connector requirements, L
The document discusses networking devices and concepts, describing network interface cards, hubs, bridges, switches, routers, topologies like bus, ring, star, and examples of different types of networks including local area networks (LANs), wireless LAN standards, wide area networks (WANs), and storage area networks (SANs). It also explains the purpose of the OSI model in standardizing network communication and its seven layers from physical layer to application layer.
This document provides an introduction to computer networks. It discusses the key components and layers of networks including local area networks (LANs), wide area networks (WANs), protocols, addressing, and models like OSI and TCP/IP. It explains how data is encapsulated as it travels from an application down the protocol stack and across physical networks. Key topics covered include network interfaces, protocols, addressing, data encapsulation, the OSI model layers, TCP/IP layers, and protocols like IP, TCP, UDP.
This document provides an overview of computer networking concepts including networking devices, network interface cards, networking device icons, network topologies, local area networks (LANs), metropolitan area networks (MANs), wide area networks (WANs), wireless networks, storage area networks (SANs), virtual private networks (VPN), bandwidth, and the OSI model. The purpose of networking technology is to increase productivity while saving costs by efficiently sharing resources and communicating between devices.
This document provides an overview of networking concepts including data networks, networking devices, network interface cards, networking device icons, repeaters, hubs, bridges, workgroup switches, routers, network topologies, LANs, MANs and WANs, wireless LAN organizations and standards, cellular topology for wireless, storage area networks, virtual private networks, bandwidth, measuring bandwidth, the OSI model, and WAN physical layer implementations.
This document provides an overview of networking concepts including routing protocols. It begins with an introduction and explanation of common networking terms like routers, switches, servers and IP addressing. The document then focuses on routing protocols, describing different types like static, default, dynamic routing protocols and examples like RIP, EIGRP, OSPF. It provides details on each protocol's functionality and purpose in routing network traffic between devices.
This document discusses networking devices and technologies used to connect local area networks (LANs) and wide area networks (WANs). It describes common physical layer components used in Ethernet LANs such as twisted pair cable, fiber optic cable, and connectors. It also discusses serial connection options and devices used for WAN connections including CSU/DSUs and their roles as data terminal equipment (DTE) and data circuit-terminating equipment (DCE).
This document discusses layered network models, specifically the OSI model and TCP/IP model. It provides an overview of each layer in both models and their functions. The key points are:
- The OSI model defines 7 layers that break communication into smaller parts to simplify the process and allow different hardware/software to work together.
- The TCP/IP model has 4 layers - application, transport, internet, and network access. It is used widely on the internet.
- Each layer adds header information to data as it moves down the stack. This encapsulation allows communication between layers and across networks.
Reference models in Networks: OSI & TCP/IPMukesh Chinta
The document discusses reference models and the OSI reference model. It provides details on:
- The need for a reference model to standardize network components and layer functions to promote interoperability.
- The OSI reference model, approved in 1984, which divides communication problems into seven layers to aid in network interconnection.
- Each of the seven layers of the OSI model, describing their functions and responsibilities for moving data through the network.
The document provides an overview of the seven layers of the OSI model:
1) The physical layer defines physical connections and transmission of raw bit streams.
2) The data link layer provides addressing and error checking for data transmission between systems on a local network.
3) The network layer establishes logical addressing to route packets across multiple networks and provides fragmentation and reassembly of packets.
4) The transport layer offers reliable or unreliable data transmission and handles issues like flow control and multiplexing of data streams.
5) The session layer manages communication sessions, synchronizing data flow between endpoints.
Get Success with the Latest UiPath UIPATH-ADPV1 Exam Dumps (V11.02) 2024yarusun
Are you worried about your preparation for the UiPath Power Platform Functional Consultant Certification Exam? You can come to DumpsBase to download the latest UiPath UIPATH-ADPV1 exam dumps (V11.02) to evaluate your preparation for the UIPATH-ADPV1 exam with the PDF format and testing engine software. The latest UiPath UIPATH-ADPV1 exam questions and answers go over every subject on the exam so you can easily understand them. You won't need to worry about passing the UIPATH-ADPV1 exam if you master all of these UiPath UIPATH-ADPV1 dumps (V11.02) of DumpsBase. #UIPATH-ADPV1 Dumps #UIPATH-ADPV1 #UIPATH-ADPV1 Exam Dumps
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 3)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
Lesson Outcomes:
- students will be able to identify and name various types of ornamental plants commonly used in landscaping and decoration, classifying them based on their characteristics such as foliage, flowering, and growth habits. They will understand the ecological, aesthetic, and economic benefits of ornamental plants, including their roles in improving air quality, providing habitats for wildlife, and enhancing the visual appeal of environments. Additionally, students will demonstrate knowledge of the basic requirements for growing ornamental plants, ensuring they can effectively cultivate and maintain these plants in various settings.
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptxCapitolTechU
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
Decolonizing Universal Design for LearningFrederic Fovet
UDL has gained in popularity over the last decade both in the K-12 and the post-secondary sectors. The usefulness of UDL to create inclusive learning experiences for the full array of diverse learners has been well documented in the literature, and there is now increasing scholarship examining the process of integrating UDL strategically across organisations. One concern, however, remains under-reported and under-researched. Much of the scholarship on UDL ironically remains while and Eurocentric. Even if UDL, as a discourse, considers the decolonization of the curriculum, it is abundantly clear that the research and advocacy related to UDL originates almost exclusively from the Global North and from a Euro-Caucasian authorship. It is argued that it is high time for the way UDL has been monopolized by Global North scholars and practitioners to be challenged. Voices discussing and framing UDL, from the Global South and Indigenous communities, must be amplified and showcased in order to rectify this glaring imbalance and contradiction.
This session represents an opportunity for the author to reflect on a volume he has just finished editing entitled Decolonizing UDL and to highlight and share insights into the key innovations, promising practices, and calls for change, originating from the Global South and Indigenous Communities, that have woven the canvas of this book. The session seeks to create a space for critical dialogue, for the challenging of existing power dynamics within the UDL scholarship, and for the emergence of transformative voices from underrepresented communities. The workshop will use the UDL principles scrupulously to engage participants in diverse ways (challenging single story approaches to the narrative that surrounds UDL implementation) , as well as offer multiple means of action and expression for them to gain ownership over the key themes and concerns of the session (by encouraging a broad range of interventions, contributions, and stances).
How to Create User Notification in Odoo 17Celine George
This slide will represent how to create user notification in Odoo 17. Odoo allows us to create and send custom notifications on some events or actions. We have different types of notification such as sticky notification, rainbow man effect, alert and raise exception warning or validation.
Cross-Cultural Leadership and CommunicationMattVassar1
Business is done in many different ways across the world. How you connect with colleagues and communicate feedback constructively differs tremendously depending on where a person comes from. Drawing on the culture map from the cultural anthropologist, Erin Meyer, this class discusses how best to manage effectively across the invisible lines of culture.
Brand Guideline of Bashundhara A4 Paper - 2024khabri85
It outlines the basic identity elements such as symbol, logotype, colors, and typefaces. It provides examples of applying the identity to materials like letterhead, business cards, reports, folders, and websites.
7. 7
Data Networks
Sharing data through the use of floppy disks is not an efficient
or cost-effective manner.
Businesses needed a solution that would successfully address
the following three problems:
• How to avoid duplication of equipment and resources
• How to communicate efficiently
• How to set up and manage a network
Businesses realized that networking technology could
increase productivity while saving money.
8. 8
Networking Devices
Equipment that connects directly to a network segment is
referred to as a device.
These devices are broken up into two classifications.
End-user devices
Network devices
End-user devices include computers, printers, scanners, and
other devices that provide services directly to the user.
Network devices include all the devices that connect the end-
user devices together to allow them to communicate.
9. 9
Network Interface Card
A network interface card (NIC) is a printed circuit board
that provides network communication capabilities to and
from a personal computer. Also called a LAN adapter.
12. 12
Router
Routers are used to connect networks together
Route packets of data from one network to another
Cisco became the de facto standard of routers because of their high-
quality router products
Routers, by default, break up a broadcast domain
13. 13
Network Topologies
Network topology defines the structure of the network.
One part of the topology definition is the physical topology,
which is the actual layout of the wire or media.
The other part is the logical topology,which defines how the
media is accessed by the hosts for sending data.
14. 14
Bus Topology
A bus topology uses a single backbone cable that is
terminated at both ends.
All the hosts connect directly to this backbone.
15. 15
Ring Topology
A ring topology connects one host to the next and the last
host to the first.
This creates a physical ring of cable.
17. 17
Extended Star Topology
An extended star topology links individual stars together by
connecting the hubs and/or switches.This topology can extend
the scope and coverage of the network.
18. 18
Mesh Topology
A mesh topology is implemented to provide as much
protection as possible from interruption of service.
Each host has its own connections to all other hosts.
Although the Internet has multiple paths to any one
location, it does not adopt the full mesh topology.
20. 20
LANs, MANs, & WANs
One early solution was the creation of local-area network
(LAN) standards which provided an open set of guidelines for
creating network hardware and software, making equipment
from different companies compatible.
What was needed was a way for information to move
efficiently and quickly, not only within a company, but also
from one business to another.
The solution was the creation of metropolitan-area networks
(MANs) and wide-area networks (WANs).
23. 23
Virtual Private Network
A VPN is a private network that is constructed within a public network
infrastructure such as the global Internet. Using VPN, a telecommuter
can access the network of the company headquarters through the
Internet by building a secure tunnel between the telecommuter’s PC
and a VPN router in the headquarters.
29. 29
Institute of Electrical and Electronics
Engineers (IEEE) 802 Standards
IEEE 802.1: Standards related to network management.
IEEE 802.2: General standard for the data link layer in the OSI
Reference Model. The IEEE divides this layer into two sublayers --
the logical link control (LLC) layer and the media access control
(MAC) layer.
IEEE 802.3: Defines the MAC layer for bus networks that use
CSMA/CD. This is the basis of the Ethernet standard.
IEEE 802.4: Defines the MAC layer for bus networks that use a
token-passing mechanism (token bus networks).
IEEE 802.5: Defines the MAC layer for token-ring networks.
IEEE 802.6: Standard for Metropolitan Area Networks (MANs)
31. 31
Why do we need the OSI Model?
To address the problem of networks increasing in size and in number, the
International Organization for Standardization (ISO) researched many
network schemes and recognized that there was a need to create a network
model
This would help network builders implement networks that could
communicate and work together
ISO therefore, released the OSI reference model in 1984.
32. 32
Don’t Get Confused.
ISO - International Organization for Standardization
OSI - Open System Interconnection
IOS - Internetwork Operating System
To avoid confusion, some people say “International
Standard Organization.”
33. 33
The OSI Reference Model
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
The OSI Model will be
used throughout your
entire networking
career!
Memorize it!
35. 35
Layer 7 - The Application Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
This layer deal with
networking
applications.
Examples:
• Email
• Web browsers
PDU - User Data
Each of the layers have Protocol Data Unit (PDU)
36. 36
Layer 6 - The Presentation Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
This layer is responsible
for presenting the data in
the required format which
may include:
Code Formatting
Encryption
Compression
PDU - Formatted Data
37. 37
Layer 5 - The Session Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
This layer establishes, manages, and
terminates sessions between two
communicating hosts.
Creates Virtual Circuit
Coordinates communication between systems
Organize their communication by offering
three different modes
Simplex
Half Duplex
Full Duplex
Example:
• Client Software
( Used for logging in)
PDU - Formatted Data
38. 38
Half Duplex
• It uses only one wire pair with a digital signal running in
both directions on the wire.
• It also uses the CSMA/CD protocol to help prevent
collisions and to permit retransmitting if a collision does
occur.
• If a hub is attached to a switch, it must operate in half-
duplex mode because the end stations must be able to
detect collisions.
• Half-duplex Ethernet—typically 10BaseT—is only about
30 to 40 percent efficient because a large 10BaseT
network will usually only give you 3 to 4Mbps—at most.
39. 39
Full Duplex
In a network that uses twisted-pair cabling, one pair is used to carry the transmitted
signal from one node to the other node. A separate pair is used for the return or
received signal. It is possible for signals to pass through both pairs simultaneously.
The capability of communication in both directions at once is known as full duplex.
40. 40
Layer 4 - The Transport Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
This layer breaks up the data from the
sending host and then reassembles it in the
receiver.
It also is used to insure reliable data
transport across the network.
Can be reliable or unreliable
Sequencing
Acknowledgment
Retransmission
Flow Control
PDU - Segments
41. 41
Layer 3 - The Network Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
Sometimes referred to as the “Cisco Layer”.
End to End Delivery
Provide logical addressing that routers use for
path determination
Segments are encapsulated
Internetwork Communication
Packet forwarding
Packet Filtering
Makes “Best Path Determination”
Fragmentation
PDU – Packets – IP/IPX
42. 42
Layer 2 - The Data Link Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
Performs Physical Addressing
This layer provides reliable transit
of data across a physical link.
Combines bits into bytes and
bytes into frames
Access to media using MAC
address
Error detection, not correction
LLC and MAC
Logical Link Control performs Link
establishment
MAC Performs Access method
PDU - Frames
Preamble DMAC SMAC Data length DATA FCS
43. 43
Layer 1 - The Physical Layer
7 Application
6 Presentation
5 Session
4 Transport
3 Network
2 Data Link
1 Physical
This is the physical media
through which the data,
represented as electronic
signals, is sent from the source
host to the destination host.
Move bits between devices
Encoding
PDU - Bits
46. 46
OSI Model Analogy
Application Layer - Source Host
After riding your new bicycle a few times in
Bangalore, you decide that you want to give it to
a friend who lives in DADAR, Mumbai.
47. 47
OSI Model Analogy
Presentation Layer - Source Host
Make sure you have the proper directions to
disassemble and reassemble the bicycle.
49. 49
OSI Model Analogy
Transport Layer - Source Host
Disassemble the bicycle and put different pieces
in different boxes. The boxes are labeled
“1 of 3”, “2 of 3”, and “3 of 3”.
50. 50
OSI Model Analogy
Network Layer - Source Host
Put your friend's complete mailing address (and
yours) on each box.Since the packages are too
big for your mailbox (and since you don’t have
enough stamps) you determine that you need to
go to the post office.
51. 51
OSI Model Analogy
Data Link Layer – Source Host
Bangalore post office takes possession of the
boxes.
54. 54
OSI Model Analogy
Network Layer - Destination
Upon examining the destination address,
Dadar post office determines that your
boxes should be delivered to your written
home address.
55. 55
OSI Model Analogy
Transport Layer - Destination
Your friend calls you and tells you he got all 3
boxes and he is having another friend named
BOB reassemble the bicycle.
57. 57
OSI Model Analogy
Presentation Layer - Destination
BOB is finished and “presents” the bicycle to
your friend. Another way to say it is that your
friend is finally getting him “present”.
62. 62
Broadcast Domain
A group of devices receiving broadcast frames
initiating from any device within the group
Routers do not forward broadcast frames,
broadcast domains are not forwarded from one
broadcast to another.
63. 63
Collision
The effect of two nodes sending transmissions
simultaneously in Ethernet. When they meet on the
physical media, the frames from each node collide and
are damaged.
64. 64
Collision Domain
The network area in Ethernet over which frames
that have collided will be detected.
Collisions are propagated by hubs and repeaters
Collisions are Not propagated by switches,
routers, or bridges
65. 65
Physical Layer
Defines
• Media type
• Connector type
• Signaling type
Ethernet
802.3
V.35
Physical
EIA/TIA-232
802.3 is responsible for LANs based on the carrier sense multiple access
collision detect (CSMA/CD) access methodology. Ethernet is an example
of a CSMA/CD network.
67. 67
Device Used At Layer 1
A B C D
Physical
• All devices are in the same collision domain.
• All devices are in the same broadcast domain.
• Devices share the same bandwidth.
68. 68
Hubs & Collision Domains
• More end stations means
more collisions.
• CSMA/CD is used.
69. 69
Layer 2
DataSource Address FCSLengthDestination Address
Variable266 4
0000.0C xx.xxxx
Vendor
Assigned
IEEE
Assigned
MAC Layer—802.3
Preamble
Ethernet II
uses “Type”
here and
does not use
802.2.
MAC Address
8Number of Bytes
synchronize senders and receivers
70. 70
Devices On Layer 2
(Switches & Bridges)
• Each segment has its own collision domain.
• All segments are in the same broadcast domain.
Data-Link
OR1 2 3 1 24
71. 71
Switches
• Each segment is its
own collision domain.
• Broadcasts are
forwarded to all
segments.
Memory
Switch
72. 72
Layer 3 : Network Layer
• Defines logical
source and
destination
addresses
associated with a
specific protocol
• Defines paths
through network
Network
IP, IPX
Data-LinkPhysical
EIA/TIA-232
V.35
Ethernet
FrameRelay
HDLC
802.2
802.3
73. 73
Layer 3 : (cont.)
Data
Source
Address
Destination
Address
IPHeader
172.15.1.1
Node
Networ
k
Logical
Address
Network Layer End-Station Packet
Route determination occurs at this layer, so a packet must include a source and
destination address.
Network-layer addresses have two components: a network component for
internetwork routing, and a node number for a device-specific address. The
example in the figure is an example of an IP packet and address.
75. 75
Device On Layer 3
Router
• Broadcast control
• Multicast control
• Optimal path
determination
• Traffic management
• Logical addressing
• Connects to WAN
services
76. 76
Layer 4 : Transport Layer
• Distinguishes between
upper-layer
applications
• Establishes end-to-end
connectivity between
applications
• Defines flow control
• Provides reliable or
unreliable services for
data transfer
Network
IPXIP
Transport
SPXTCP UDP
80. 80
Why Another Model?
Although the OSI reference model is universally recognized, the
historical and technical open standard of the Internet is
Transmission Control Protocol / Internet Protocol (TCP/IP).
The TCP/IP reference model and the TCP/IP protocol stack
make data communication possible between any two
computers, anywhere in the world, at nearly the speed of light.
The U.S. Department of Defense (DoD) created the TCP/IP
reference model because it wanted a network that could survive
any conditions, even a nuclear war.
82. 82
Application Layer Overview
*Used by the Router
Application
Transpor
t
Internet
Data-
Link
Physical
File Transfer
- TFTP*
- FTP*
- NFS
E-Mail
- SMTP
Remote Login
- Telnet*
- rlogin*
Network Management
- SNMP*
Name Management
- DNS*
File Transfer
- TFTP*
- FTP*
- NFS
E-Mail
- SMTP
Remote Login
- Telnet*
- rlogin*
Network Management
- SNMP*
Name Management
- DNS*
83. 83
Transport Layer Overview
Transmission Control
Protocol (TCP)
User Datagram
Protocol (UDP)
Transmission Control
Protocol (TCP)
User Datagram
Protocol (UDP)
Application
Transport
Internet
Data-Link
Physical
Connection-
Oriented
Connectionles
s
84. 84
TCP Segment Format
Source Port (16) Destination Port (16)
Sequence Number (32)
Header
Length (4)
Acknowledgment Number (32)
Reserved (6)Code Bits (6) Window (16)
Checksum (16) Urgent (16)
Options (0 or 32 if Any)
Data (Varies)
20
Bytes
Bit 0 Bit 15 Bit 16 Bit 31
90. 90
Windowing
• Windowing in networking means the quantity of data
segments which is measured in bytes that a machine
can transmit/send on the network without receiving an
acknowledgement
92. 92
TCP Sequence and
Acknowledgment Numbers
Source
Port
Source
Port
Destination
Port
Destination
Port
……
SequenceSequence AcknowledgmentAcknowledgment
10281028 2323
SourceDest.
11111111
Seq.
101101
Ack.
10281028 2323
SourceDest.
10101010
Seq.
100100
Ack.
102810282323
SourceDest.
11111111
Seq.
100100
Ack.
102810282323
SourceDest.
12121212
Seq.
101101
Ack.
I just got number
11, now I need
number 12.
I just
sent number
11.
93. 93
Windowing
There are two window sizes—one set to 1 and one set to
3.
When you’ve configured a window size of 1, the sending
machine waits for an acknowledgment for each data
segment it transmits before transmitting another
If you’ve configured a window size of 3, it’s allowed to
transmit three data segments before an acknowledgment
is received.
96. 96
Flow Control
Another function of the transport layer is to provide
optional flow control.
Flow control is used to ensure that networking devices
don’t send too much information to the destination,
overflowing its receiving buffer space, and causing it to
drop the sent information
The purpose of flow control is to ensure the destination
doesn't get overrun by too much information sent by the
source
98. 98
User Datagram Protocol (UDP)
User Datagram Protocol (UDP) is the connectionless transport protocol
in the TCP/IP protocol stack.
UDP is a simple protocol that exchanges datagrams, without
acknowledgments or guaranteed delivery. Error processing and
retransmission must be handled by higher layer protocols.
UDP is designed for applications that do not need to put sequences of
segments together.
The protocols that use UDP include:
• TFTP (Trivial File Transfer Protocol)
• SNMP (Simple Network Management Protocol)
• DHCP (Dynamic Host Control Protocol)
• DNS (Domain Name System)
99. 99
• No sequence or acknowledgment fields
UDP Segment Format
Source Port (16) Destination Port (16)
Length (16)
Data (if Any)
1Bit 0 Bit 15 Bit 16 Bit 31
Checksum (16)
8
Bytes
101. 101
Internet Layer Overview
• In the OSI reference model, the network layer
corresponds to the TCP/IP Internet layer.
Internet Protocol (IP)
Internet Control Message
Protocol (ICMP)
Address Resolution
Protocol (ARP)
Reverse Address
Resolution Protocol (RARP)
Internet Protocol (IP)
Internet Control Message
Protocol (ICMP)
Address Resolution
Protocol (ARP)
Reverse Address
Resolution Protocol (RARP)
Application
Transport
Internet
Data-Link
Physical
102. 102
IP Datagram
Version
(4)
Destination IP Address (32)
Options (0 or 32 if Any)
Data (Varies if Any)
1Bit 0 Bit 15 Bit 16 Bit 31
Header
Length (4)
Priority &Type
of Service (8)
Total Length (16)
Identification (16)
Flags
(3) Fragment Offset (13)
Time-to-Live (8) Protocol (8) Header Checksum (16)
Source IP Address (32)
20
Bytes
105. 105
Address Resolution Protocol
• Map IP MAC
• Local ARP
172.16.3.1
IP: 172.16.3.2
Ethernet: 0800.0020.1111
IP: 172.16.3.2
Ethernet: 0800.0020.1111
172.16.3.2
IP: 172.16.3.2 = ???IP: 172.16.3.2 = ???
I heard that
broadcast. The
message is for me.
Here is my Ethernet
address.
I need the
Ethernet
address of
176.16.3.2.
106. 106
Reverse ARP
• Map MAC IP
Ethernet: 0800.0020.1111
IP: 172.16.3.25
Ethernet: 0800.0020.1111
IP: 172.16.3.25
Ethernet: 0800.0020.1111 IP = ???Ethernet: 0800.0020.1111 IP = ???
What is
my IP
address?
I heard that
broadcast.
Your IP
address is
172.16.3.25
.
108. 108
Found by Xerox Palo Alto Research Center (PARC) in
1975
Original designed as a 2.94 Mbps system to connect
100 computers on a 1 km cable
Later, Xerox, Intel and DEC drew up a standard
support 10 Mbps – Ethernet II
Basis for the IEEE’s 802.3 specification
Most widely used LAN technology in the world
Origin of Ethernet
109. 109
10 Mbps IEEE Standards - 10BaseT
• 10BaseT ⇒ 10 Mbps, baseband,
over Twisted-pair cable
• Running Ethernet over twisted-pair
wiring as specified by IEEE 802.3
• Configure in a star pattern
• Twisting the wires reduces EMI
• Fiber Optic has no EMI
Unshielded twisted-pair
RJ-45 Plug and Socket
110. 110
Unshielded Twisted Pair Cable (UTP)
most popular
maximum length 100 m
prone to noise
Category 1
Category 2
Category 3
Category 4
Category 5
Category 6
Voice transmission of traditional telephone
For data up to 4 Mbps, 4 pairs full-duplex
For data up to 10 Mbps, 4 pairs full-duplex
For data up to 16 Mbps, 4 pairs full-duplex
For data up to 100 Mbps, 4 pairs full-duplex
For data up to 1000 Mbps, 4 pairs full-duplex
Twisted Pair Cables
111. 111
Baseband Transmission
Entire channel is used to transmit a single digital signal
Complete bandwidth of the cable is used by a single signal
The transmission distance is shorter
The electrical interference is lower
Broadband Transmission
Use analog signaling and a range of frequencies
Continuous signals flow in the form of waves
Support multiple analog transmission (channels)
Modem Broadband
Transmission
Network
Card
Baseband
Transmission
Baseband VS Broadband
118. 118
Straight-Thru or Crossover
Use straight-through cables for the following cabling:
Switch to router
Switch to PC or server
Hub to PC or server
Use crossover cables for the following cabling:
Switch to switch
Switch to hub
Hub to hub
Router to router
PC to PC
Router to PC
125. 125
– Unique addressing allows communication
between end stations.
– Path choice is based on destination address.
• Location is represented by an address
Introduction to TCP/IP
Addresses
172.18.0.2
172.18.0.1
172.17.0.2172.17.0.1
172.16.0.2
172.16.0.1
SA DA
HD
R
DATA
10.13.0.0 192.168.1.0
10.13.0.1 192.168.1.1
130. 130
Classless Inter-Domain Routing
(CIDR)
• Basically the method that ISPs (Internet Service
Providers) use to allocate an amount of
addresses to a company, a home
• Ex : 192.168.10.32/28
• The slash notation (/) means how many bits are
turned on (1s)
133. 133
IP Address Classes Exercise
Address Class Network Host
10.2.1.1
128.63.2.100
201.222.5.64
192.6.141.2
130.113.64.16
256.241.201.1
0
134. 134
IP Address Classes Exercise
Answers
Address Class Network Host
10.2.1.1
128.63.2.100
201.222.5.64
192.6.141.2
130.113.64.16
256.241.201.1
0
A
B
C
C
B
Nonexistent
10.0.0.0
128.63.0.0
201.222.5.0
192.6.141.0
130.113.0.0
0.2.1.1
0.0.2.100
0.0.0.64
0.0.0.2
0.0.64.16
135. 135
Subnetting
Subnetting is logically dividing the network
by extending the 1’s used in SNM
Advantage
Can divide network in smaller parts
Restrict Broadcast traffic
Security
Simplified Administration
136. 136
Formula
Number of subnets – 2x
-2
Where X = number of bits borrowed
Number of Hosts – 2y
-2
Where y = number of 0’s
Block Size = Total number of Address
Block Size = 256-Mask
137. 137
Subnetting
Classful IP Addressing SNM are a set of 255’s and 0’s.
In Binary it’s contiguous 1’s and 0’s.
SNM cannot be any value as it won’t follow the rule of
contiguous 1’s and 0’s.
Possible subnet mask values
– 0
– 128
– 192
– 224
– 240
– 248
– 252
– 254
– 255
142. 142
Subnet Mask
172172 1616 00 00
255255 255255 00 00
255255 255255 255255 00
IP
Address
Default
Subnet
Mask
8-Bit
Subnet
Mask
Network Host
Network Host
Network Subnet Host
• Also written as “/16,” where 16 represents the
number of 1s in the mask
• Also written as “/24,” where 24 represents the
number of 1s in the mask
11111111 11111111 00000000 00000000
186. 187
Broadcast Addresses
Exercise Answers
153.50.6.127
Address Class Subnet Broadcast
201.222.10.6
0
255.255.255.248 C
201.222.10.6
3
201.222.10.5
6
Subnet
Mask
15.16.193.6 255.255.248.0 A
15.16.199.25
5
15.16.192.
0
128.16.32.1
3
255.255.255.2
52
B
128.16.32.1
5
128.16.32.12
153.50.6.2
7
255.255.255.12
8
B
153.50.6.
0
187. 188
VLSM
• VLSM is a method of designating a different subnet
mask for the same network number on different subnets
• Can use a long mask on networks with few hosts and a
shorter mask on subnets with many hosts
• With VLSMs we can have different subnet masks for
different subnets.
188. 189
Variable Length Subnetting
VLSM allows us to use one class C address to
design a networking scheme to meet the
following requirements:
Bangalore 60 Hosts
Mumbai 28 Hosts
Sydney 12 Hosts
Singapore 12 Hosts
WAN 1 2 Hosts
WAN 2 2 Hosts
WAN 3 2 Hosts
189. 190
Networking Requirements
Bangalore 60
Mumbai 60 Sydney 60 Singapore 60
WAN 1
WAN 2
WAN 3
In the example above, a /26 was used to provide the 60
addresses for Bangalore and the other LANs. There are no
addresses left for WAN links
194. 195
Summarization
• Summarization, also called route aggregation, allows
routing protocols to advertise many networks as one
address.
• The purpose of this is to reduce the size of routing tables
on routers to save memory
• Route summarization (also called route aggregation or
supernetting) can reduce the number of routes that a
router must maintain
• Route summarization is possible only when a proper
addressing plan is in place
• Route summarization is most effective within a subnetted
environment when the network addresses are in
contiguous blocks
True/False Multiple Choice Select the Correct Answer Select the Three Correct Answers Select All That Apply Type the command for viewing routes learned from an IP routing protocol. Simulations
Peer Validation – u understanding where u stand in the industry Personal - For knowledge gain Potential Employer – During the interview the company will filter by the certification Career Advancement – CCNA, CCNP, CCIE You can progress ur carrer in ur company
When you are cabling up your computers and networking devices, various types of topologies can be used. A topology defines how the devices are connected.
Metropolitan Area Networks A metropolitan area network (MAN) is a hybrid between a LAN and a WAN. Like a WAN, it connects two or more LANs in the same geographic area. A MAN, for example, might connect two different buildings or offices in the same city. However, whereas WANs typically provide low- to medium-speed access, MANs provide high-speed connections, such as T1 (1.544Mbps) and optical services. The optical services provided include SONET (the Synchronous Optical Network standard) and SDH (the Synchronous Digital Hierarchy standard). With these optical services, carriers can provide high-speed services, including ATM and Gigabit Ethernet. These two optical services (covered in Chapter 2 ) provide speeds ranging into the hundreds or thousands of megabits per second (Mbps). Devices used to provide connections for MANs include high-end routers, ATM switches, and optical switches.
A VPN typically provides authentication, confidentiality, and integrity to create a secure connection between two sites or devices. Authentication is provided to validate the identities of the two peers. Confidentiality provides encryption of the data to keep it private from prying eyes. And integrity is used to ensure that the data sent between the two devices or sites has not been tampered with.
When you looked at Figure 1.1, did you notice that the router is found at center stage, and that it connects each physical network together? We have to use this layout because of the older technologies involved–—bridges and hubs. Once we have only switches in our network, things change a lot! The LAN switches would then be placed at the center of the network world and the routers would be found connecting only logical networks together. If I’ve implemented this kind of setup, I’ve created virtual LANs (VLANs). On the top network in Figure 1.1, you’ll notice that a bridge was used to connect the hubs to a router. The bridge breaks up collision domains, but all the hosts connected to both hubs are still crammed into the same broadcast domain. Also, the bridge only created two collision domains, so each device connected to a hub is in the same collision domain as every other device connected to that same hub. This is pretty lame, but it’s still better than having one collision domain for all hosts. Notice something else: the three hubs at the bottom that are connected also connect to the router, creating one humongous collision domain and one humongous broadcast domain. This makes the bridged network look much better indeed!
Core Layer – Backbone Dist Layer- to connect Access layer to Core Layer Access Layer is the layer where all the end users reside Core Layer The core layer, as its name suggests, is the backbone of the network. It provides a high speed connection between the different distribution layer devices. Because of the need for high-speed connections, the core consists of high-speed switches and will not, typically, perform any type of packet or frame manipulations, Because switches are used at the core, the core is referred to as a layer-2 core Exam Watch The core provides a high-speed layer-2 switching infrastructure and typically does not manipulate packet contents. Distribution Layer Of the three layers, the distribution layer performs most of the connectivity tasks. In larger networks, routers are used at the distribution layer to connect the access layers to the core. For smaller networks, sometimes switches are used. Functions :- Containing broadcasts between the layers Securing traffic between the layers Providing a hierarchy through layer-3 logical addressing and route summarization Translating between different media types Access Layer The bottom layer of the three-layer hierarchical model is the access layer. Actually, the access layer is at the periphery of your campus network, separated from the core layer by the distribution layer. The main function of the access layer is to provide the user’s initial connection to your network. Typically, this connection is provided by a switch, or sometimes, a hub. Sometimes if the user works at a small branch office or home office, this device can also be a router. But in most cases, the connection is provided by a switch.
IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry
Before OSI it was difficult for the vendors to create network products OSI, why U need to study, its a structured approach to troubleshoot Each has independent model Before considering how to configure Cisco routers and switches, you must be introduced to basic networking concepts you’ll need to understand in order to grasp the advanced concepts discussed in later chapters ISO developed the seven-layer
top (seventh) layer of the OSI Reference Model is the application layer. It provides the user interface. Examples of TCP/IP applications include telnet, FTP, HTTP, and SMTP.
The Presentation layer gets its name from its purpose: It presents data to the Application layer and is responsible for data translation and code formatting Exam Watch The presentation layer determines how data is represented to the user. Examples of presentation layer protocols and standards include ASCII, BMP, GIF, JPEG, WAV, AVI, and MPEG. ASCII (the American Standard Code for Information Interchange, used by most devices today) uses seven bits to represent characters. EBCDIC (Extended Binary-Coded Decimal Interchange Code, developed by IBM) PICT A picture format used by Macintosh programs for transferring QuickDraw graphics. TIFF Tagged Image File Format; a standard graphics format for high-resolution, bitmapped images. JPEG Photo standards brought to us by the Joint Photographic Experts Group. Other standards guide movies and sound: MIDI Musical Instrument Digital Interface (sometimes called Musical Instrument Device Interface), used for digitized music. MPEG Increasingly popular Moving Picture Experts Group standard for the compression and coding of motion video for CDs. It provides digital storage and bit rates up to 1.5Mbps. QuickTime For use with Macintosh programs; manages audio and video applications. RTF Rich Text Format, a file format that lets you exchange text files between different word processors, even in different operating systems. Categorize as file type
Exam Watch The session layer is responsible for setting up and tearing down network connections. Examples include RPCs and NFS. The actual mechanics of this process, however, are implemented at the transport layer. To set up connections or tear down connections, the session layer communicates with the transport layer. Remote Procedure Call (RPC) is an example of an IP session protocol; the Network File System (NFS), which uses RPC, is an example application at this layer.
Full duplex means you can send and receive at the same time. This was impossible on coax, the original Ethernet media since it had only 1 conductor and Ethernet uses baseband signaling. However, 10BaseT and 100BaseT use a cable with 4 conductors. (Actually, there are typically 8 conductors but only 4 are used.) 1 pair of conductors is used to send data and the other to receive data. Each pair are also twisted around each other to help eliminate noise, hence the name unshielded twisted pair. With the right hardware you can theoretically double the speed of your network by sending and receiving simultaneously. Of course it’s a rare environment that has so much data to send in both directions but full duplex will give you a performance boost because you no longer have to wait for 1 host to finish sending before you start to send your data, i.e. a deferral
P rotocol D ata U nit . The term used to describe data as it moves from one layer of the OSI model to another.
Preamble is sequence of 1’s and 0’s signifies the beginning of a frame DataLen decides the length of Data, can be 64 to 1500 Bytes is called as MTU FCS is used for error detection CRC run on the data field and and the values is kept in FCS
The data is in Bits bits are converted to signals known as encoding The physical layer is also responsible for how binary information is converted to a physical layer signal. For example, if the cable uses copper as a transport medium, the physical layer defines how binary 1’s and 0’s are converted into an electrical signal by using different voltage levels. If the cable uses fiber, the physical layer defines how 1’s and 0’s are represented using an LED or laser with different light frequencies
Exam Watch Make sure you understand the mechanics of Ethernet: CSMA/CD. No device has priority over another device. If two devices transmit simultaneously, a collision occurs. When this happens, a jam signal is generated and the devices try to retransmit after waiting a random period.
If two or more machines simultaneously sense the wire and see no frame, and each places its frame on the wire, a collision will occur. In this situation, the voltage levels on a copper wire or the light frequencies on a piece of fiber get messed up. For example, if two NICs attempt to put the same voltage on an electrical piece of wire, the voltage level will be different than if only one device does so. Basically, the two original frames become unintelligible (or undecipherable). The NICs, when they place a frame on the wire, examine the status of the wire to ensure that a collision does not occur: this is the collision detection mechanism of CSMA/CD. If the NICs see a collision for their transmitted frames, they have to resend the frames. In this instance, each NIC that was transmitting a frame when a collision occurred creates a special signal, called a jam signal, on the wire, waits a small random time period, and senses the wire again. If no frame is currently on the wire, the NIC will then retransmit its original frame. The time period that the NIC waits is measured in microseconds, a delay that can’t be detected by a human. Likewise, the time period the NICs wait is random to help ensure a collision won’t occur again when these NICs retransmit their frames. The more devices you place on a segment, the more likely you are to experience collisions. If you put too many devices on the segment, too many collisions will occur, seriously affecting your throughput. Therefore, you need to monitor the number of collisions on each of your network segments. The more collisions you experience, the less throughput you’ll get. Normally, if your collisions are less than one percent of your total traffic, you are okay. This is not to say that collisions are bad —they are just one part of how Ethernet functions.
Tk-10-7
IEEE’s Version of Ethernet There are actually two variants of Ethernet: IEEE’s implementation and the DIX implementation. Ethernet was developed by three different companies in the early 1980s: Digital, Intel, and Xerox, or DIX for short. This implementation of Ethernet has evolved over time; its current version is called Ethernet II. Devices running TCP/IP typically use the Ethernet II implementation. The second version of Ethernet was developed by IEEE and is standardized in the IEEE 802.2 and 802.3 standards. IEEE has split the data link layer into two components: MAC and LLC. These components are described in Table 2-5 . The top part of the data link layer is the LLC, and its function is performed in software. The bottom part of the data link layer is the MAC, and its function is performed in hardware. Logical Link Control (LLC) 802.2 Defines how to multiplex multiple network layer protocols in the data link layer frame. LLC is performed in software. MAC 802.3 Defines how information is transmitted in an Ethernet environment, and defines the framing, MAC addressing, and mechanics as to how Ethernet works. MAC is performed in hardware
TK16-15
Logical Addressing – scenario Explain
Another function of the transport layer is to set up and maintain connections for the session layer. The information transferred to devices at the transport layer is called a segment. Because multiple connections may be established from one device to another device or devices, some type of multiplexing function is needed to differentiate between the various connections. This ensures that the transport layer can send data from a particular application to the correct destination and, when receiving data from a destination, get it to the right application. To accomplish this feat, the transport layer assigns a unique set of numbers for each connection. These numbers are called port or socket numbers. There is a source port number and a destination port number for each connection. The destination port numbers assigned by the source device are referred to as well-known port numbers. The source device uses an appropriate port number in the destination port field to indicate to the destination which application it is trying to access. For example, the TCP/IP protocol stack gives each application a unique port number.
A DNS query is a good example where using a connection-oriented service doesn’t make sense. With a DNS query, a device is trying to resolve a fully qualified domain name to an IP address. The device sends the single query to a DNS server and waits for the server’s response. In this process, only two messages are generated: the client’s query and the server’s response. Because of the minimal amount of information shared between these two devices, it makes no sense to establish a reliable connection first before sending the query. Instead, the device should just send its information and wait for a response. If a response doesn’t come back, the application can send the information again or the user can get involved. Again, with DNS, you can configure two DNS servers in the Microsoft Windows operating system. If you don’t get a reply from the first server, the application can use the second configured server.
Purpose: This figure shows the protocol layers and compares them with the layers of the OSI reference model. Emphasize: This figure shows the TCP/IP conceptual layer titles. The protocol stack is used several times in this chapter, and the lower two layers may be sometimes called the network interface layer. The terms “packet” and “datagram” are nearly interchangeable. However, a datagram is a unit of data, while a packet is a physical entity that appears on a network. In most cases, a packet contains a datagram. In some protocols, however, a datagram is divided into a number of packets to accommodate a requirement for smaller, transmittable pieces. Note: Creation and documentation of the Internet protocols closely resembles an academic research project. The protocols are specified in documents called RFCs. RFCs are published, reviewed, and analyzed by the Internet community.
Purpose: This figure discusses application-layer protocols. Emphasize: The common network applications today include file transfer, remote login, network management, and e-mail. We focus on TCP/IP in this course for several reasons: TCP/IP is a universally available protocol and you will use it at work. TCP/IP is a useful reference for understanding other protocols, because it includes elements that are representative of other protocols. TCP/IP is important because the router uses it as a configuration tool. The router uses Telnet for remote configuration, TFTP to transfer configuration files and operating system images, and SNMP for network management. Transition: The next section moves down the model to discuss the transport layer.
Purpose: This figure introduces the protocols used at the transport layer. Emphasize: TCP is one protocol within the protocol suite of TCP/IP. TCP is an acknowledged transport-layer protocol. However, TCP has a large header so there is much overhead. UDP is unacknowledged. By eliminating all of the acknowledgement mechanisms, UDP is fast and efficient. UDP does not divide application data into pieces. Reliability is assumed to be handled by the upper-layer protocols, by a reliable lower-layer protocol, or by an error-tolerant application. UDP does have a smaller header and less overhead.
Purpose: This figure explains what is contained in a TCP segment. Emphasize: Source Port and Destination Port are the connections to the upper-layer protocol. Sequence and Acknowledgment numbers are the position in the user’s byte stream of this segment. Sequence numbers are used for establishing reliability. HLEN is the header length. It tells us where the data begins. Six bits are reserved for future use. Code Bits distinguish session management messages from data. Window is a term we will come back to in a few slides. For now, consider it to be the size of the receiver’s buffers. Checksum is a cyclic redundancy check (CRC). It verifies that the datagram arrived intact. Urgent Pointer is used to signify urgent data.- To deal with situations where a certain part of a data stream needs to be sent with a higher priority than the rest, TCP incorporates an “urgent” function. When critical data needs to be sent, the application signals this to its TCP layer, which transmits it with the URG bit set in the TCP segment, bypassing any lower-priority data that may have already been queued for transmission Options are used by vendors to enhance their protocol offering. The data portion of the frame contains the upper-layer protocol data.
Purpose: This figure explains how TCP uses port numbers to connect applications. Emphasize: These port numbers were standardized in RFC 1340. This RFC has been obsoleted by RFC 1700. However, many of the port numbers outlined in RFC 1340 are still being used as standards. It is possible to filter on TCP port numbers. The TCP port number, combined with other information, is what UNIX C language developers call a socket. However, work sockets have different meanings in XNS and Novell, where they are service access point abstractions or programming interfaces rather than service access point identifiers.
Purpose: This figure continues to explain how TCP uses port numbers. Emphasize: In most cases, the TCP port number on one side of a conversation is the same on the other side. For example, when a file transfer takes place, the software on one host is communicating with a peer application on another host. In this example we see a Telnet (TCP port 23) session. It is possible to have multiple Telnet sessions running simultaneously on a host or router. Telnet selects an unused port number above 1023 to represent the source port for each independent session. Notice that the destination port is still 23. Port numbering is important to understand in order to configure IP extended access lists. The lack of symmetry in port number use is a critical factor in establishing effective security.
If more than one device is involved, things become more complicated. In the example shown PC-B also has a connection to the server. This connection has a source port number of 2,000 and a destination port number of 23—another telnet connection. This brings up an interesting dilemma. How does the server differentiate between PC-A’s connection that has port numbers 2,000/23 and PC-B’s, which has the same? Actually, the server uses not only the port numbers at the transport layer to multiplex connections, but also the layer-3 addresses of the devices connected to these connections. In this example, notice that PC-A and PC-B have different layer-3 addresses: 1.1.1.1 and 1.1.1.2 respectively.
Syn – Can I Talk to you? Syn (Can I talk to you?), ACK (Yes) Ack (Yes) Emphasize: In the next segment, host A sends some data. Note that the sequence number of the segment in step 3 is the same as as the ACK in Step 2. This sequence is like two people talking. The first person wants to talk to the second, and says, “I would like to talk with you.” (SYN) The second person responds, “Good. I want to talk with you.” (SYN, ACK) The first person then says, “Fine—let us talk. Here is what I have to say.” (SYN, ACK, DATA) At this point, either side can begin communicating and either side can break the connection. TCP is a peer-to-peer (balanced) communication method (no primary/secondary). Note: This figure explains TCP connection establishment. For more information regarding the three-way handshake in establishing a TCP connection, refer to RFC 793.
Forward Ack Emphasize: ACK for message 3. (Send ACK 4, Receive ACK 4) This sequence helps to convey the delay associated with a window size of one. Note: TCP acknowledgments are expectational and are sometimes called forward referenced, which means that they refer to the segment they are expecting to receive, not the one just sent. Acknowledgment field sizes can become an issue when transmitting data at FDDI and ATM speeds.
Layer 4 of 4 Emphasize: Layer 4 shows the acknowledgment number is 12. The sequence and acknowledgment numbers are directional. The slide highlights the communication going in one direction. The sequence and acknowledgments take place with the sender on the right. TCP provides full-duplex communication.
Forward Ack Delayed ACK Flow Control Another function of the transport layer is to provide optional flow control. Flow control is used to ensure that networking devices don’t send too much information to the destination, overflowing its receiving buffer space, and causing it to drop the sent information. Overflow is not good because the source will have to resend all of the information that was dropped. The transport layer can use two basic flow control methods: Exam Watch The purpose of flow control is to ensure the destination doesn't get overrun by too much information sent by the source. Ready/not ready signals Windowing Ready/not ready signals and windowing are used to implement flow control. Ready/not ready signals are not efficient, causing drops in unnecessary traffic and delays in the transmission of traffic. Windowing addresses these issues. With windowing, a window size is established, which defines the number of segments that can be transferred before waiting for an acknowledgment from the destination.
Windows size 3 –Delayed Ack
Purpose: This graphic explains the format of UDP. Emphasize: UDP is simple and efficient but not reliable. The UDP segment format includes a source port, a destination port, a length field, and an optional checksum field. It has no sequencing, acknowledgments, or windowing. Example: TFTP uses a checksum. At the end of the transfer, if the checksum does not match, then the file did not make it. The user is notified and must enter the command again. As a result, the user has become the reliability mechanism. Transition: The next section discusses the network layer of the OSI model and how it corresponds to the TCP/IP Internet layer.
IP is the main protocol It is connection less IP will carry the data packets Data packets are IP Packets IP
Version – IP version current 4 TTL – How many HOPS packet can withstand Protocol – to determine whether TCP or UDP
Purpose: This figure explains the use of the protocol field. Emphasize: Protocol numbers connect, or multiplex, IP to the transport layer. These numbers are standardized in RFC 1700. Cisco uses these numbers in filtering with extended access lists.
Purpose: This figure explains which messages are ICMP messages. Emphasize: Describe ICMP messages and ping .
Layer 4 of 4 Emphasize: In layer 4, the bulleted items at the bottom of the slide appear. ARP provides translation between network and data link layers. Discuss why it is necessary to have a mechanism like ARP. Describe ARP operation. Not all protocols use ARP. Some use other methods for address translation. Note: For the message to be transmitted uniquely to a single interface on the multiaccess link, it is necessary to build a frame with the unique MAC address of the interface.
Layer 4 of 4 Emphasize: In layer 4, the bulleted items appear at the bottom of the slide. RARP is used to boot diskless workstations over a network.
TK-23-24
Purpose: This is an introduction slide to the IP addressing section. Emphasize: Stations with internetwork access must have unique addresses.
Layer 3 of 3 Emphasize: In layer 3, an example of dotted decimal format and binary are displayed. IP address format is dotted decimal. Dotted decimal makes it easy to work with IP addresses. However, in this course we will work with the addresses on the bit level, so we will convert these addresses into binary, make changes to them, and convert them back. The central authority for addresses is the Internet Assigned Numbers Authority (IANA). Note: This most common form of addressing reflects the widely used IP version 4. Faced with the problem of depleting available addresses, Internet Engineering Task Force (IETF) work is under way for a backward-compatible next generation of IP (IPng, also called IP 6). IP 6 will offer expanded routing and addressing capabilities with 128-bit addresses rather than the 32-bit addressing shown on the graphic. Addresses from both IP versions will coexist. Initial occurrences will probably be at locations with address translator software and firewalls.
Slide 1 of 2 Purpose: This graphic describes the three most common classes of IP address. Emphasize: Discuss classes of addresses. Each address contains information about the network number and the host number of the device. Class A addresses are for very large organizations, Class B addresses are for smaller organizations, and Class C addresses for even smaller ones. As the number of networks grows, classes may eventually be replaced by another addressing mechanism, such as classless interdomain routing (CIDR). RFC 1467, Status of CIDR Deployment in the Internet , presents information about CIDR. RFC 1817, CIDR and Classful Routing , also presents CIDR information.
Slide 2 of 2 Emphasize: Highlight the fixed values that start each class address. The first octet rule states that when an address falls into a specified range, it belongs to a certain class. Students should soon be able to recognize the address class of any IP address on sight. Note: If time or interest permits, you can use the initial bit patterns in the first octet and show how a class of IP network derives the range of network numbers for that IP address class.
Purpose: This figure presents an overview of host and network address conventions. Emphasize: In the example, 172.16.0.0 and 10.0.0.0 refer to the wires at each end of the router. Explain how the routing table is used. Entries in the routing table refer to the network only. The router does not know the location of hosts; it knows the location of networks. .
Purpose: This figure explains how to calculate the number of available hosts in a network. Emphasize: 2 N -2 is the calculation to determine available hosts. N is the number of binary digits in the host field. Subtract 2 because a host cannot be all 0s or 1s. The same principle applies when determining the number of available networks.
Layer 1 of 2 Purpose: This exercise verifies that the students understand IP address classes, network numbers, and host numbers. Give the students time to list the address class, network, and host number for each IP address in the table. Review the correct answers interactively. The answers are given in the following figure.
Layer 2 of 2 Purpose: The answers to the exercise are given in the figure. Note: Students can also find the answers to this exercise in the Appendix D, “Answers.”
Advantages of Subnetting Subnetting is often used to accommodate a divided physical topology or to restrict broadcast traffic on a network.Other advantages of subnetting include improved secu rity (by restricting unauthorized traffic behind routers)and simplified administration (by delegating control of subnets to other departments or administrators). Accommodating Physical Topology Suppose you are designing a campus network with 200 hosts spread over four buildings —Voter Hall,Twilight Hall,Monroe Hall, and Sunderland Hall.You want each of these four buildings to include 50 hosts.If your ISP has allocated to you the Class C network 208.147.66.0,you can use the addresses 208.147.66.1 –208.147.66.254 for your 200 hosts. Restricting Broadcast Traffic A broadcast is a network message sent from a single computer and distributed to all other devices on the same physical network segment. Broadcasts are resource-intensive because they use up network bandwidth and request the attention of every network adapter and processor on the local network segment. Routers block broadcasts and protect networks from becoming overburdened with unnecessary traffic.Because routers also define the logical limits of subnets,subnet ting a network indirectly allows you to limit the propagation of broadcast traffic in that network.
Purpose: This figure explains what networks look like without subnets. Emphasize: Without subnets, use of network addressing space is inefficient. The Class B network is like a highway with no exits—there is no place to exit, so all of the traffic is in one line.
Purpose: This figure describes network structure when subnets are used. Emphasize: The host bits of an IP address can be subdivided into a subnetwork section and a host section. The subnetwork section in this example is the full third octet. Point out the difference in the addressing between the previous slide and this slide. A subnetted address space is like a highway with exits. A network device uses a subnet mask to determine what part of the IP address is used for the network, the subnet, and the device ID. A subnet mask is a 32-bit value containing a number of one bits for the network and subnet ID, and a number of zero bits for the host ID. Given its own IP address and subnet mask, a device can determine if an IP packet is destined for 1) a device on its own subnet, 2) a device on a different subnet on its own network, or 3) a device on a different network. A device can determine what class of address the device has been assigned from its own IP address. The subnet mask then tells the device where the boundary is between the subnet ID and the host ID.
Layer 1 of 2 Purpose: This figure shows what would happen if there were no subnetting. Emphasize: If networks could not be broken down into more granular subnetworks, few networks could exist, each with a capacity for many hosts.
Layer 1 of 2 Emphasize: By turning on more bits in the mask, we reserve some bits as network information and can use these bits to describe subnetworks. Describe how the router makes use of this technique. Point out that there is more information in the routing table now. Note: As you enter the discussion about subnet masks, a question might arise about whether it is legal to define a discontiguous subnet mask. A discontiguous subnet mask consists of intervening zeros, as in 101111011000, rather than all ones followed by zeros, as in 1111111100000000. The question has two answers. According to RFC 950 that describes IP, a discontiguous subnet mask is legal. However, the hardware expense to produce an interface that supports discontiguous masking is cost prohibitive. Thus in practice it is not supported on most vendors’ equipment, including Cisco. Also, discontiguous masking has no benefit, and it is much more difficult to maintain a network based on this design. Later RFCs make noncontiguous subnet masks illegal because they are incompatible with future addressing schemes such as CIDR.
Emphasize: Turn on more bits to represent subnets. Compare the default or standard subnet mask with the subnet mask in the slide. The following are the rules for IP addressing: An address is 32 bits, divided into three components: First octet rule bits Network bits (path selection bits) Node bits The first octet rule states that the most significant bit pattern in the first octet determines the class of the address. Path selection bits cannot be all ones or zeros. Certain addresses are reserved. RFC 1918 defines some of those. Prefix or mask one bits are path selection significant; zero bits are host bits and therefore not significant. Use the logical AND to combine the address and mask bits to get the subnet address. The maximum number of available subnets equals 2 prefix bits - 2; the maximum number of available hosts equals 2 32- prefix bits - 2.
Purpose: This figure explains how subnet masks are converted to decimal addresses. Emphasize: Review binary-to-decimal conversion, bit weighting, and conversion. Explain the logical AND. One possible explanation of the logical AND follows. We will need to be able to perform a logical AND on the binary numbers. Just take two binary numbers and place one above the other. The ones in the bottom are like a pipe—the number above it just drops through. The zeros are like a clogged pipe, so nothing comes out in the answer. Presenting a truth table will help some students understand. You might need to give more than one explanation. Note: You might want to hand out a binary-to-decimal conversion sheet if you have not already done so. We have not included one in the lab section. It is more useful to have one that is on a separate page from the labs.
Purpose: This graphic explains how routers use addresses that have no subnet mask. Emphasize: Explain how masking works at the bit level. Zero bits mask host information. Note: This is an easy place to lose students. At this point, they need to learn several abstract mathematical concepts before we can show them how to lay out an IP-addressed network. To the novice, these techniques may seem unrelated, making the presentation confusing. To a more experienced audience, these techniques will be familiar.
Slide 1 of 2 Purpose: This figure shows how the router determines an address when subnetting is used. Emphasize: This example makes a Class B address space look like a collection of Class C address spaces. Now the logical AND allows us to extract the subnet number as well as the assigned network number. An exercise follows that tests the students’ understanding of subnet masks.
Slide 2 of 2 Purpose: This figure shows how the router determines an address when subnetting is used. Emphasize: This example is different from the previous example in that the the subnet and host are divided within an octet. Transition: An exercise follows that tests the students’ understanding of subnet masks.
Layer 1 of 2 Purpose: This exercise is for the students to take the given IP addresses and associated subnet masks and perform a logical AND to extract the subnet number. Provide time in class and review the answers after most of the students have finished. The answers are given in the following figure.
Layer 2 of 2 Purpose: The answers to the exercise are given in the figure. Note: Students can also find the answers to this exercise in the Appendix D, “Answers.”
Purpose: This figure explains how broadcast addresses work. Emphasize: A range of addresses is needed to allocate address space. A valid range of addresses is between subnet zero and the directed broadcast. The following RFCs provide more information about broadcasts: RFC 919, Broadcasting Internet Datagrams RFC 922, Broadcasting IP Datagrams in the Presence of Subnets Cisco’s support for broadcasts generally complies with these two RFCs. It does not support multisubnet broadcasts that are defined in RFC 922.
Layer 9 of 9 Emphasize: In layer 9, convert binary back to dotted decimal.
Purpose: This figure shows an example of a Class B network with a subnet.
Purpose: This figure explains how to plan subnet numbers. Emphasize: What if this were a Class B address? How many bits would we have for subnetting then? Where do you want to draw the line now? Alternatives to review: Creating the subnet at the octet boundary is easier to work with—more host bits and more subnet bits. Explain that the decision is really a guess on how you think your network will grow—will it have more subnets or more hosts? RFC 1219: Mirroring hedges the subnetting decision by buying time. Do not use mirroring if you intend to use route summarization or variable-length subnet masking (VLSM); they are incompatible with mirroring.
Purpose: This figure shows an example of a Class C network with a subnet. Emphasize: Contrast the Class C network subnet mask with the previous Class B example.
Layer 1 of 2 Emphasize: Have the students calculate the subnet numbers and the broadcast address for each subnet from the given IP addresses and subnet masks.
Layer 2 of 2 Purpose: The answers to the exercise are given in the figure. Note: Students can also find the answers to this exercise in the Appendix D, “Answers.”
Stand for Variable length Sub net mask Every subnet will have different SNM based o requirement
2 HOST EACH FOR WAN Link = /30 SNM = 255.255.255.252 BS=4 Networks = 192.168.1.4, 8,12 For 12 Hosts Bit needed 4 bits Mask 255.255.255.240 Block Size – 16 Network 192.168.1.16 For 25 hosts 5 bits on host part, so 3 bit on network Mask 224 BS = 32 Network = 192.168.1.32 For 40 hosts bit to be left = 6 Mask 192 BS = 64 Network 192.168.1.64
Wan 1 – 192.168.1.4/30 Wan 2 – 192.168.1.8/30 WAN3 - 192.168.1.12/30 WAN4 – 192.168.1.16/30 For 5 hosts 192.168.1.24/29 For 8 hosts 192.168.1.32/28 For 15 Hosts 192.168.1.64/27 For 35 Hosts 192.168.1.128/26
In the networking world route aggregate means combining routes to multiple networks into one. This is also known as route summarization or supernetting. It is normally used to reduce the number of route entries in the routing table by advertising numerous routes into one larger route.